Hawk for Model Number FTQ353IWUW/XAA-00 RF burner outer burner runs hot regardless of settings. I ordered a samsung oem energy regulator switch dg44-01002a. It is a redesigned switch with 7 terminals. I have a wiring diagram for the ftq353iwuw which indicates the P1 terminal receives a red wire (L2) Several of the replies for the same problem and same switch indicate P1 should receive a double black wire ( L1 ). I have also seen answers indicating the yellow wire should go to 4a which for the surface element. It appears the yellow wire turns on the hot indicator when any burner is turned on. The question - did the functionally of the switch change, and the wires can not be transferred from old to new? I there instructions from Samsung on how to wire this modified switch correctly from Samsung to their techs? Any information you could provide me would really be appreciated. thanks, George
Answer Hawk, There is not an instructions sheet but here is the wiring hookup according to the wiring diagram. P1 Red from L2 S2 will be blue to surface indicator light Black will go to P2 Black with brown tracer will go to S1 Violet with gray stripe will go to 4 Sky blue will go to 4a Blue to the limiter box will go to terminal 2. Read More... Answered by AppliancePartsPros.com | Thursday, December 29, 2022