Chris for Model Number HAV2360AWW Hello, This is my first go around with using self-tapping screws. Can you recommend a video that shows the proper technique for installing these tub mounting bolts? Thanks.
Answer Chris In your case, and presuming you're replacing the tub seal kit you'll find it a bit easier if you partially drive the tub mounting bolts into the mounting stem, then remove them and install the tub/basket. You'll need a proper sized socket for the bolts, an extension(the longer the better) and ratchet wrench. Once the mounting stem is installed, center the bolt in one of the openings, use the socket, extension, and ratchet to drive the bolt while slightly pressing down on the ratchet. Drive the bolt halfway into the mounting stem opening then remove it, repeat for the remaining holes, install the cushion and tub install the tub bolts and drive them all the way down until the tub fits tight on the mounting stem. Read More... Answered by AppliancePartsPros.com | Friday, December 20, 2019