Kevin for Model Number atw4475tvo I have an Admiral washer that will fill and run only on hot. The other 3 positions fill with hot water only briefly and then shut down. I have replaced both the temp control switch and water inlet valve. Cold water hookup is flowing freely. Thanks.
Answer Hello Kevin. You will need to check and see if there is power at the brown wire at the ATC switch. If so, test and see if there is power at the yellow/red wire on the switch. If there is no power at the brown wire when the unit is suppose to bring in cold water, you will need to replace the timer WP8572976. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Friday, June 24, 2011