Mike for Model Number ghw915pw I occasionally get the error #06 at the beginning of the final spin cycle. Could this be caused by an old belt? The unit is 6 years old and started doing it intermittently about a year ago.
Answer Hello Mike. The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after three minutes. 1. Verify the shipping system including shipping bolts, spacers and cables are removed. 2. Unplug washer or disconnect power. 3. Check wire harness connections between the drive motor and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU). 4. Plug in washer or reconnect power. 5. Check the MCU by looking for operations of the drive motor. 6. Check the drive motor for powered rotations. If there is power to the motor and the motor does not run, you will need to replace the motor WP8182793. Hope this helps. Read More... Answered by AppliancePartsPros.com | Monday, September 19, 2011