Customer Questions and Answers for Electronic Control Board by Whirlpool

Peter, this would indicate that the programming has been altered and would need to be reset. To do this, the program code would need to be found on the model/serial tag of the unit, then the programming mode would need to be entered. To enter the programming mode, 1. Press and hold the Door Alarm Keypad. 2. Press and hold Freezer Temperature DOWN /- Keypad within 3 seconds. 3. Release the Door Alarm Keypad and wait 3 seconds. 4. The control will display PE to indicate the programming mode. 5. Entry is confirmed by pressing the Freezer Temperature DOWN /- Keypad once more. 6. The control will display the current Program CODE. This value should be validated with theProgram CODE printed on the unit serial plate. 7. Press the Refrigerator Temperature UP /+ Keypad or Refrigerator Temperature DOWN /- Keypad to change the digit value with each key press. 8. The decimal point indicates the selected digit. Press the Freezer Temperature UP /+ Keypad to select the next digit. 9. Once the desired Program CODE is entered, press and hold the Freezer Temperature DOWN /- Keypad until the Program CODE begins flashing indicating it has been saved.