Fred for Model Number MFI2569VEM Hi, Re; Whirlpool Fridge. After two years in this house finally decided to connect the fridge water and ice dispenser to water supply. Once I connected everything and tested the water dispensing, I got three glasses of water and then it quit working. I powered down the fridge and reseated the connectors on the pcb on the back of the fridge and powered back up and it dispensed one glass and quit again. So far I have checked the following items. 1- Dispensing lever micro switch for continuity. ok 2- Reseated connectors on PCB above the dispensing lever. 3- Reseated connectors on PCB behind the fridge. 4- Applied 110 power directly to water fill valve and got water coming out of the dispenser. 5- Measured for power at the water fill valve while pressing water dispensing lever and got no power. All the lights and digital display is working. It appears to also making ice and dropping into the ice bucket but it does not dispense either one.
Answer Fred, The most likely cause for the unit to not dispense ice or water would be a Low voltage board on the dispenser is faulty and would need to be replaced. Read More... Answered by AppliancePartsPros.com | Wednesday, June 8, 2016