Brian C July 20, 2024 for Model Number MFI2569VEM1 My control panel has started to act funky. The ice and water buttons won't switch the light, but usually the dispenser will work for whichever one you clicked on last. Sometimes it just locks up. When this happens, you can't push any other button on the panel to get it to work. Is this the control panel about to kick the bucket or something else?
1 Answer Brian C, Based on the information provided you will likely need the user interface assembly part# W10740217 Read More...
David July 13, 2024 for Model Number MFI2569VEM2 Maytag frige with lights working on inside and water running on outside. Nothing working on control panel on outside freezer door. Light stays on and everything is blank. I replaced electronic board on back and it did not fix problem. Unplugged to reset with no help. Should I now replace the freezer door control board?
1 Answer Hello David, thank you for contacting APP, At this point I would recommend replacing the User Interface W10740217, this includes the Keypad and Control Board with Display. Read More...
Dan October 06, 2019 for Model Number MF12269vem7 front display lights went out when you push any button all lights come on but then go off if you push water dispenser all lights come on as well but wont dispense water or ice is it the front control board I've take the panel off checked all connection and then it worked for a moment but the water was pulsing then stopped working again thank you
1 Answer Dan, It sounds like some internal switches in the user interface board have failed and need to be replaced. W10740217 Read More...
Ben Craft January 24, 2019 for Model Number MFI2569VEW The unit will not dispense ice or water. When the buttons are pressed the corresponding LEDs light however there is no response when the dispense lever is pressed. I replaced the LV board behind the control panel and it worked for about 5 minutes. However it quit again. Could the HV board be king out the LV board? Thanks.
1 Answer Ben, This issue would more likely be caused by a faulty chute assembly WP13005703W. Read More...
David January 18, 2018 for Model Number MFI2569VEW1 Please advise which part # can be used to replace my Maytag refrigerator display control panel?
1 Answer Hello David, according to the model number supplied we list part number W10776982 as the correct kit for your unit. Thanks! Read More...
Mike September 21, 2017 for Model Number MFI2569YEM0 Display panel on ice maker has gone out. If you press any key, all the keys light up and beeps. As soon as you let off, all keys go blank again. Refrigerator lights are on, but not cooling or freezing. Tried unplugging to reset, but that did not work.Is the control board behind the display pad the problem or should I check elsewhere? Thank You.
1 Answer Hello Mike. You will need to check the high voltage board on the back of the unit first. If it is good, then replace the lv board in the dispenser. Thanks. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Leon June 01, 2017 for Model Number MFI2569VEM3 ALL POWER IS OFF TO EVERYTHING EXCEPT THE INTERIOR LIGHT. IS THERE A TRANSFORMER ON THIS MODEL? THERE SEEMS TO BE NO POWER TO THE MAIN CONTROL MODULE.
1 Answer Hello Leon. You will need to order WPW10310240 for the control needed for the unit. Read More...
Steve April 17, 2017 for Model Number MfI2269vem3 The LED lights on our water/ice dispenser are not working. I am wondering if I have to replace the whole control panel. Everything else works. All connections and wires seem good.
1 Answer Hello Steve, You will need to test for 12Vdc from J6-2 to J6-3 at the main board. If no voltage, replace the main board WPW10310240. If present, test for 12Vdc from J1-3 to J1-4. If voltage is present, replace the dispenser board. Read More...
Alvaro Lima March 14, 2017 for Model Number MFI2269VEW1 The model of my refrigerator MAYTAG is MFI 2269VEW1. Water light and ice light on the control panel do not work. I can not change the command to ice. Where would the problem be. Can you help me?
1 Answer Alvaro, You will want to check the wiring harness at the upper left door hinge for damaged or loose connections. If the wiring checks ok then the issue will most likely be caused by a faulty main board which is part number WPW10310240. Read More...
Tom February 25, 2017 for Model Number MFI2569VEW1 No display on interface. Will light up all digits when a button is pushed, and beep. Also, ice door flap opens and shuts once when any button is pushed, and all numbers light up.
1 Answer Hello Tom, This sounds like a power supply issue on the main board WPW10310240. Read More...