Customer Questions and Answers for Console Assembly by Whirlpool

Thomas, Yes, it is a project a novice can do, here's some help " Electrical Shock Hazard disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Unplug dishwasher or disconnect power. 2. Open the dishwasher door. 3. Remove 8 screws from the sides of the door panel.4. Hold the front panel to the door panel and close the door. 5. Lean the front panel away from the dishwasher. 6. Lift the door panel up and off the front of the dishwasher. Removing the Control Panel 1. Unplug dishwasher or disconnect power. 2. Open the dishwasher door. 3. While supporting the control panel, remove six screws from the upper sides and center of the inner door panel. 4. While continuing to support the control panel, close the door. 5. Gently pull outward to disengage the control panel. 6. The control panel will be connected with wires that may need to be disconnected to set the control panel down." You'll do fine. Thanks and Good Luck