Caltexpdx for Model Number Whirlpool KUDI01ILBS6 I have replaced the control panel AP3726665, on my kitchenaid dishwasher. It worked fine,"once" Now the clean light is flashing. I pressed cancel and I turned off the breaker to see if it could reset and it is still blinking. What do I need to do next?
Answer Hello Caltexpdx. You neeed to check the heating circuit in the dishwasher and make sure it is good. If so, you will need to replace the control board on the unit. If the heater or thermostat is bad, you will need to replace the bad part. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, August 20, 2012