Greg for Model Number KSCS25INSS00 Ice maker was making ice intermittently over the last few weeks and has now stopped all together. In the past this was most likely due to a bad ice maker, however in reading on your site this could also be related to a faulty ice dispenser control board. How can you determine which is faulty?
Answer Greg, Yes the issue could be the I R dispenser control boards W11629974, the test/diagnosis is relatively easy. Open the freezer door, observe the red LED light on the right side of the freezer wall. If the LED light flashes twice then pauses and repeats, this indicates the flapper on the left side wall is blocking the IR beam, or the optics are faulty. Press in on the flapper on the left side of the wall, if the LED light continues to flash twice and pause and repeats, then the optics boards will need to be replaced. If the LED remains on solid after the flapper is pressed in then you'll need to check or replace the ice maker. Read More... Answered by AppliancePartsPros.com | Tuesday, May 19, 2015