Chris for Model Number kitchenaid KSS907SSS00 Our Oven Broil function isn't working properly. The electrical heating element works fine and comes up to temp quickly but the gas elements are both faulting. The gas definitely comes on, you can smell it. The igniters click and sometimes light off, Both top and bottom, sometimes only one. but then quickly extinguish during pre-heat, which can take a very long time. (I believe in most cases the only thing heating is the electric element in the oven.) Eventually the oven will come up to temp, but it struggles to hold it. I think because the gas isn't staying lit. But not entirely sure. Is this an igniter problem? Spark module problem? Or something else? Any help would be appreciated.
Answer Hello Chris, first, the oven door has to be closed as per the door switch during oven heating otherwise the control will stop oven heating after a minute. Next remove both the bake and burner tubes and lightly sand where the tubes secure to the chassis, snug the mounting screws, this is important as that is an electrical contact point for grounding the burner tubes. If problem still occurs replace the spark ignition wire harness , part WP9762904. Read More... Answered by AppliancePartsPros.com | Tuesday, June 30, 2020