Customer Questions and Answers for Water Filter Head And Tube Assembly by Whirlpool

Skip, You didn't mention an issue, but you want to make sure the water tank behind the crisper drawers is not frozen, and there's plenty of water at the fill valve connection. 1. Unplug refrigerator or disconnect power. 2. Turn off the water supply to the refrigerator. 3. Open the refrigerator compartment doors and remove any items from around the water dispenser switch. 4. Slide the water dispenser screw cover up and remove it. 5. Remove the hex-head screw from the water dispenser. 6. Pull the top of the water dispenser out and remove the water dispenser from the liner. 7. Disconnect the two wires from the dispenser switch terminals. 8. Push and release the locking tabs on the water dispenser switch, and pull the switch off the housing pins. 9. Disconnect the end of the water dispenser tube at the quick-disconnect coming from the water reservoir. 10. Remove the retaining clip and water tubing from the water dispenser housing and pull the end of the tube off the housing. 11. Pull the water dispenser tubing out of the channel in the refrigerator liner. As long as the filter and filter housing are clean and the filter is installed properly, you should find the issue in the switch assembly.