Brad for Model Number Maytag PSD267LHES Refigerator Trying to install a new water filter head but I cannot feed the tube with the metal fitting, which I believe is a compression fitting, through the hole in the foam insulation in the back of the fridge. Do I cut the tube from the fitting, feed the tube through, and then do the reverse process for the new fitting and reattach the tube into the fitting, or do I have to remove the foam piece which would mean removing the entire back panel of the fridge?
Answer Hello Brad. 1. Remove filter cover opening cover and pulling rear left side of cover to the left to release cover from holding pin. 2. Filter head can be released from holding bracket by opening tabs on left side filter head and pulling downward and to your left to release filter head. 3. Tubing needs to be disconnected from water valves in the machine compartment. 4. After tubing is loose from water valves pull the filter head and tubing out the front of unit. 5. Reverse procedure to reassemble. Read More... Answered by AppliancePartsPros.com | Tuesday, October 9, 2012