Randall for Model Number 110-629222100 on front of unit inside door Do you have a drawing and dirrections to remove/replace the heating element to this sears model 90 series cloths dryer? I do not have heat and need to verify it is bad.
Answer Hello Randall. You will need to remove the bottom toe panel with a flat blade, and you will see the element WP3387747 on the lower right hand side. Remove the wires and test it for continuity. It should read closed. If open, you will need to replace the element. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Monday, January 9, 2012