Jon for Model Number EC3JHAXRL00 We had a large spike of voltage come into my house taking out my microwave and the refrigerator. I have voltage coming into the inverter board but the DC red and black coming out has nothing. Could it have taken out just that inverter board or could it have taken out more than that? We heard a loud pop coming from underneath the fridge. Can you send me a voltage schematic so I can check the points to determine which part I will need to order from you? I also want to replace all the plastic water lines since my water is tasting bad. Do you have a kit for this fridge as well? Thank you!
Answer Jon, There is no way to check the inverter board itself. All you can do is make sure the other wires have the correct voltage and test the compressor at the three pins for the same resistance between any two. It can be all 8 or all 10 as long as they are all the same. You missing the voltage to the inverter would mean you have to replace the board for sure.WP2307037 Then retest for proper voltage and if the compressor doesn't run the inverter would need to be replaced. Read More... Answered by AppliancePartsPros.com | Tuesday, November 6, 2018