Margaret H. for Model Number KUDRO1TJB10 My dishwasher will full up and heat up but the water does not circulate. The dishes from the lower rack and the upper rack are not washing. It is more like a rinse. My husband says it looks like it is leaking at the back where the arm connects. Can you help me find the part that I might need? I am not sure if I need the spray arm assembly or something else. thank you for your help.
Answer Margaret, The first thing to check is the water level in the bottom of the tub. Start the dishwasher, let it fill and wash for 5 minutes, unlatch the door, remove the lower rack, and check that the water level is in contact with the bottom of the heater element(+/- 1/8 inch), If the water level is not proper, the spray arms and pump won't operate properly and cause a washability problem. If you're sure the water is leaking from the manifold pipe in the back of the tub. Then you will need to remove the rack check the docking port on the manifold WPW10077863 Then check or replace the WPW10258150 manifold and probe WPW10082831 . Read More... Answered by AppliancePartsPros.com | Wednesday, December 11, 2013