Brad for Model Number MAH3000AWW My washer will not spin. The door locked light comes on. I looked at the control board and found no evidence of fried resistors. Could it just be a bad wax motor?
Answer Hello Brad. If the light comes on, the motor is good. You will need to check the balance switches and the spin enable switch. If all are good, then the motor kit will need to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, December 12, 2013