Randy for Model Number KDRP467KSS0 NEXT QUESTION; WHERE IS THE RELAY BOARD LOCATED AT? Responding to the answer below. I already changed out the oven temp sesnor in feb 2014. next step please OUR OVEN IS ACTING UP - IRREGULAR 1. IT WOULD NOT COME UP TO TEMPERATURE AFTER USING THE CLEAN CYCLE 2. AFTER A FEW DAYS IT CAME UP TO TMEPERATURE AND WORKED FOR A FEW MONTHS FINE 3. IT SEEMS TO ACT UP WHEN YOU CHANGE TEMPATURES AFTER TURNING ON OR CHANGING CYLES FROM BAKE, BROIL 4. WHAT PART IS CAUSING MY ISSUES Randy for Model Number KDRP467KSS0 Answer Randy, the more likely issue is a faulty oven temp. sensor W10131825 or loose connection in the harness. Quite often the high temperatures produced in the self clean cycle, can disrupt the resistance and cause erratic temperatures in the oven. The thermostat 8300802 may not be the issue, because the oven heats, but it would be a good preventative move to replace it as well. Read more: http://www.appliancepartspros.com/whirlpool-thermostat-tod-temp-8300802-ap3086326.html#qa1#ixzz3HY671SuK http://www.appliancepartspros.com SPONDING TO YOUR FIRST ANSWER BELOW Randy Q for Model Number KDRP467KSSO Answer Hello Randy. If the sensor is new, you will need to replace the relay board 8300795 in the unit. Read more: http://www.appliancepartspros.com/whirlpool-thermostat-tod-temp-8300802-ap3086326.html#qa1#ixzz3HdmL9aEm http://www.appliancepartspros.com
Answer Hello Randy. It looks like the board is located under the top access panel. You need to remove the top to access the board. Read More... Answered by AppliancePartsPros.com | Thursday, October 30, 2014