Sukhi for Model Number Dryer Model# 11062702100 My dryer is spinning but not heating up. I put a new heating coil and a thermostat but still won't heat. While doing this I noticed that one of the orange wires that is attached to the thermal cut -off unit is burnt and the wire has broken off. Could this be why it is not heating.
Answer Sukhi, If the wire going to the thermal cutoff if burnt and broken then yes this would cause the unit to not heat. You will need to repair the wire connector and test the thermal cut off to make sure that it is still good. To test this you would do a continuity test. If there is continuity then the thermal fuse is good. If no continuity then you would need to replace the thermal fuse 279769. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, April 11, 2013