2Txbolts for Model Number 79571602010 The water inlet for the ice maker not getting energized. Water still flows thru it when it cycles, but it sounds like water pressure forces water thru. Check inlet valve for continuity and there was none. Replaced inlet valve, no change.
Answer Hello 2txbolts. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, July 16, 2015