Manish for Model Number GI6FDRXXY07 My Ice Maker was not getting any water. The water dispenser was working fine. When I tested the water Inlet valve I did not see continuity in one of the 2 solenoid coils with 200 ohms setting. I ordered a new water Inlet valve from your website and before I replaced it, I tried to test it for the continuity in both coils. One of the coils still does not show continuity. I believe the part I received is defective and I need to reach out to your customer service for replacement.
Answer Hello Manish, There are two solenoids on the water valve because one is for the water dispense and one is for the icemaker. It is very doubtful that you would receive a water inlet valve with the same problem you are having with the water valve on the unit. You should use a straw or something stiff and clean to insert into the fill tube to make sure it is not frozen up. You are welcome to contact us if you need any additional assistance in troubleshooting at 1-877-477-7278. Be sure to have your model number and tell the representative who answers that you require technical assistance and we will help as much as possible. Thank you for your patience and understanding in this matter. Read More... Answered by AppliancePartsPros.com | Tuesday, June 2, 2020