Greg for Model Number LAT9616AAE Washer will not fill with water, I would like to know if there is any other part causing this issue besides the water inlet valve?
Answer Hello Greg. Make sure the lid switch is good and check the pressure switch on the unit. If those are good, then test for power to the valve. If there is power there and no water, then the valve is bad. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Wednesday, August 16, 2017