Parts for Briggs & Stratton 14B932-0025-F1: Base-Air Cleaner / Filter Parts

Seals between crankcase and crankshaft to prevent oil leaks and contamination. Replace if you notice oil pooling or engine performance issues.

Crankcase gasket creates an airtight seal to prevent oil and air leaks. Replace when deteriorated from heat and pressure. Confirm fit with model number.

Lower oil seal prevents engine oil leaks in small lawn and garden engines. Replace if you notice oil pooling or reduced performance. Verify fit with your engine model number.

Engine won't start or has loss of power? A sheared flywheel key prevents proper ignition timing. This key aligns the flywheel to the crankshaft.

Fix engine knocking or loss of power with this piston pin lock. Secures the piston pin in small engines. Essential for proper piston assembly.

This screw is a genuine Midwest Engine replacement part for small engine appliances, including lawn tractors, lawn mowers, snowblowers, leaf blowers, vacuums, and tillers. The purpose of a screw is to tightly link materials together through rotation that pierces into the material. A screw might have to be replaced in the event that it is lost or misplaced, a common occurrence due to its size. A screw might also be replaced if it deteriorates over time, through erosion, cracking, or piercing, thereby reducing its efficacy in holding materials together. This kind of damage can be attributed to general overuse, to age, or simply to long-term exposure. If a screw is subject to any of this kind of damage, it is best to replace it immediately, as the materials held together by the screw must continue to be held together. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This screw is compatible with the following brands: Briggs & Stratton, Toro, Cub Cadet, and Lawn Boy.

Engine running rough or losing power? A worn exhaust valve may be the culprit. This valve controls exhaust gas flow for proper engine performance.

Intake valve for small lawn and garden engines. Replaces worn, cracked, or damaged valves affecting engine compression. Direct fit component.

Replace a worn valve retainer if your engine has compression loss or valve train noise. This washer-shaped part secures the valve spring lock on the valve.

Replace a frayed or broken starter rope that prevents your lawn mower engine from starting. Simple DIY repair that restores pull-start function.

Can't start your engine? A frayed or broken starter rope grip prevents pull-starting. This replacement rope grip restores easy starting in 15 minutes.

Fix a flooded carburetor with this float. Controls fuel flow to the carburetor bowl, preventing flooding and ensuring proper air-fuel mixture.

Mower won't start or runs poorly? Cracked or leaking fuel lines prevent proper fuel delivery. Simple 15-minute DIY repair restores engine performance.

Fix engine starting issues with this choke return spring. Common solution when your engine won't start cold or runs rough during warmup. Easy 10-minute fix.

In-line fuel filter prevents contaminants from entering your engine's carburetor. Replace if clogged to restore fuel flow and prevent starting issues.

Control wire casing for lawn and garden engines. Protects and guides throttle or choke control cables. Replace if cracked, split, or missing.

Control wire for lawn and garden engines. Connects controls to engine throttle or choke mechanisms. Replace if frayed, broken, kinked, or missing.

Sealing washer creates a leak-proof seal in your lawn and garden engine. Replace when worn or cracked to prevent oil or fuel leaks. Confirm fit.

Spark plugs work by providing an electric spark in a combustion chamber, igniting the mix of fuel and air that allows the engine to turn and propel a drive shaft. Insulated with ceramic to make sure the electric charge flowing through it is properly discharged, the plug is screwed into the cylinder head. The movement of the piston sucks fuel into the cylinder until it reaches the optimum level, the compression triggering the spark plug to send a pulse that ignites the fuel and pushes the piston to the back of the cylinder. This process is repeated hundreds of times a minute in an internal combustion engine. Eventually spark plugs simply wear out, particularly if they are not properly gapped, if the fuel mixture is improper, or the engine is subject to excessive use. This plug is compatible with most lawnmowers, small engines, and pressure washers made by Briggs & Stratton, Cub Cadet, and Toro. The plug itself is a guaranteed OEM part and is sold individually.

This genuine rocker switch is designed as an identical replacement part for select models of blower/vacuum units. The rocker switch is also known as a power switch or on/off switch and it is what controls the current to electric blowers. The switch is made of plastic and metal. This switch may become worn and not function well after regular use because of the repetitive motion of turning the machine on and off. In some cases, the switch may experience electrical malfunctions that could present a fire hazard or keep the unit from working at all. In the event that the switch is damaged or defective, it will need to be replaced. This genuine OEM replacement rocker switch is manufactured by Briggs & Stratton. It can be used with more than 150 models of machines from Briggs & Stratton, Toro, and Vanguard. This part is made of durable plastic and metal components and is sold as an individual unit. It plugs into the pressure washer via wires, but a screwdriver may be needed to assist in the installation. Always disconnect the power supply when working on electrical components and wear gloves for safety.

Engine won't shut off when you turn the key? Replace your lawn mower's stop switch to restore safe engine control. Simple safety repair.

Fix misfiring, hard starting, or no spark issues with this spark plug boot. Connects spark plug to magneto on lawn mowers and small engines. Easy DIY fix.

If your small engine won't start or has no spark, a faulty spark plug terminal may be the cause. This terminal connects the ignition coil to the plug.

This spring brake is a genuine Midwest Engine part that can be used as a replacement part for outdoor appliances with small engines, including lawn mowers, chipper shredders, snowblowers, and other such appliances. Spring brakes are a braking system employed a large, coiled spring that is kept under high tension; the control valves attached to the spring brake are the mechanism by which the spring brake is released.If the spring brake has been damaged, is malfunctioning, or is in a state of disrepair, this will manifest in the form of a sudden, volatile eruption from the air brake chamber. This is a dangerous state for a small engine, so repair should be conducted immediately. Additionally, a new spring brake part should be ordered before any attempt to use the appliance without a proper repair. Remember to always wear gloves when handling, repairing, and operating outdoor equipment, and stay safe around the small engine of the appliance if the spring brake has malfunctioned and caused a dangerous situation.This spring brake is compatible with the brands Briggs and Stratton, Cub Cadet, and Toro.

Black plastic fuel tank cap for lawn mowers, snowblowers, and pressure washers. Replace damaged, cracked, or leaking caps. Direct drop-in installation.

Fuel cap for lawn mower engines. Seals the fuel tank to prevent leaks and contamination. Replace if lost, cracked, broken, or damaged from wear.

Fix fuel leaks or starting problems with this engine fuel tank. Holds your equipment's fuel supply. Direct replacement for small engines on mowers and outdoor power equipment.

Fix engine misfires and stalling issues with a new carburetor float bowl. Controls fuel flow from tank to motor. Direct fit for Briggs & Stratton models.