Parts for Thermador MED272EB01: Bottom Oven Door Parts

This inner door panel replaces a damaged or worn interior door surface to restore structural support and a finished interior appearance. It provides the mounting surface for door hardware and helps protect internal components. What it does:

• Restores the interior door structure so latches, hinges, and assemblies mount securely
• Protects internal insulation and electrical components behind the door
• Improves the appliance's interior appearance when the original panel is cracked, dented, or warped
• Helps maintain proper door alignment for reliable opening and closing

• One inner door panel

• Disconnect power (and water supply for dishwashers) before beginning work
• Handle glass and sheet-metal edges carefully; wear gloves and eye protection
• Installation typically requires removing the outer door panel or trim and transferring door hardware to the new inner panel
• Verify fasteners and seal placement during reassembly to ensure proper alignment

This replacement door seal forms a watertight gasket around the appliance door to help prevent leaks and maintain proper sealing during cycles. Designed to restore door closure and reduce water escaping at the door perimeter. What it does:

• Creates a secure, flexible seal between the door and cabinet to help prevent water leaks.
• Restores proper door closure and helps maintain cycle performance.
• Helps reduce drips and pooling at the base of the appliance when the door is closed.

• High-level replacement: remove the old seal from the door channel and press the new seal evenly into place.
• Inspect the door channel and mounting area for debris or damage before installing the new seal.
• If adhesive or clips are used, use the same type specified by the manufacturer; avoid makeshift adhesives that can degrade or cause odors.
• Disconnect power and water supply before starting work and follow all safety precautions.

A replacement outer glass panel for Bosch appliances that restores the door's appearance and protects internal components from damage. Use this panel to repair visible chips, cracks, or shattered glass and return the door to serviceable condition. What it does:

• Replaces cracked, chipped, or broken exterior door glass for a secure, finished surface
• Protects internal controls and insulation from moisture, debris, and impact
• Restores original appearance and helps prevent sharp edges that can cause injury
• Helps maintain normal door operation by replacing damaged or warped glass

• Disconnect power (and water supply for dishwashers) before starting any repair to avoid shock or flooding.
• Handle glass with heavy gloves and eye protection; support the panel to avoid dropping or cracking.
• Removal typically requires taking off the door trim/handle and any retainers; follow OEM diagram and instructions.
• If reusing seals or clips, inspect them for damage and replace as needed for a proper fit and seal.

This is the dishwasher door frame that supports the door assembly and trim, restoring the door's fit and appearance. It replaces a damaged or bent frame to help the door close securely and sit flush. What it does:

• Forms the structural border of the dishwasher door, holding inner panels and trim in place
• Helps maintain correct door alignment and sealing for proper closing
• Addresses symptoms like a warped or dented door edge, loose trim, or visible damage
• Works with existing latch and hinge components when installed correctly

• One dishwasher door frame

• Door may need to be removed for access
• Keep track of screws and trim clips; reuse original fasteners unless replacements are provided
• Disconnect power and water to the appliance and follow safety precautions before starting
• Minor adjustments to alignment may be necessary after installation to ensure proper sealing

This is the dishwasher door frame that supports the door assembly and trim, restoring the door's fit and appearance. It replaces a damaged or bent frame to help the door close securely and sit flush. What it does:

• Forms the structural border of the dishwasher door, holding inner panels and trim in place
• Helps maintain correct door alignment and sealing for proper closing
• Addresses symptoms like a warped or dented door edge, loose trim, or visible damage
• Works with existing latch and hinge components when installed correctly

• One dishwasher door frame

• Door may need to be removed for access
• Keep track of screws and trim clips; reuse original fasteners unless replacements are provided
• Disconnect power and water to the appliance and follow safety precautions before starting
• Minor adjustments to alignment may be necessary after installation to ensure proper sealing

This is the dishwasher door frame that supports the door assembly and trim, restoring the door's fit and appearance. It replaces a damaged or bent frame to help the door close securely and sit flush. What it does:

• Forms the structural border of the dishwasher door, holding inner panels and trim in place
• Helps maintain correct door alignment and sealing for proper closing
• Addresses symptoms like a warped or dented door edge, loose trim, or visible damage
• Works with existing latch and hinge components when installed correctly

• One dishwasher door frame

• Door may need to be removed for access
• Keep track of screws and trim clips; reuse original fasteners unless replacements are provided
• Disconnect power and water to the appliance and follow safety precautions before starting
• Minor adjustments to alignment may be necessary after installation to ensure proper sealing

This is the dishwasher door frame that supports the door assembly and trim, restoring the door's fit and appearance. It replaces a damaged or bent frame to help the door close securely and sit flush. What it does:

• Forms the structural border of the dishwasher door, holding inner panels and trim in place
• Helps maintain correct door alignment and sealing for proper closing
• Addresses symptoms like a warped or dented door edge, loose trim, or visible damage
• Works with existing latch and hinge components when installed correctly

• One dishwasher door frame

• Door may need to be removed for access
• Keep track of screws and trim clips; reuse original fasteners unless replacements are provided
• Disconnect power and water to the appliance and follow safety precautions before starting
• Minor adjustments to alignment may be necessary after installation to ensure proper sealing

This glass panel protects the appliance control/display area and keeps internal components shielded while maintaining a clean, finished appearance. It restores the look and functionality of the control area after damage or wear. What it does:

• Protects control buttons, touchpads and display from spills, grease and accidental impact
• Maintains a clear viewing area for the appliance display and indicators
• Replaces cracked, chipped or scratched glass that can impair operation or appearance
• Helps preserve the underlying electronics by providing a solid protective barrier

• High-level replacement only; handle glass with care and wear cut-resistant gloves
• Disconnect power to the appliance before removing the old panel or servicing controls
• Follow OEM disassembly steps for access—do not force parts or use excessive pry tools
• If the glass is bonded or sealed, adhesive removal and proper resealing may be required

This strip is a replacement trim piece that restores a clean edge and helps secure adjacent panels for a finished appearance. It's a simple exterior part that improves fit and prevents gaps. What it does

• Covers and protects exposed edges or seams on the appliance exterior
• Helps hold adjoining panels or trim in place to reduce rattling or movement
• Restores the original finished look when an original strip is cracked, worn, or missing
• Can prevent small debris from getting into seams or gaps

• Install by aligning the strip with the panel edge and pressing or fastening per the original attachment points
• Use appropriate tools to avoid scratching the surface; do not force parts into place
• Disconnect power and follow appliance-specific safety steps if removal of panels exposes electrical components
• If fasteners are missing or damaged, replace them with OEM-specified hardware