Briggs & Stratton Engine Parts

This authentic replacement item is a user's repair manual for Briggs & Stratton appliance engines. Whenever an operator has a problem with their appliance's engine, it's standard that they check the user's manual. It includes step-by-step directions for how to diagnose and then repair faulty parts. Many appliances use the same type of engine, so this manual is compatible with a wide variety of Briggs & Stratton products. It can also be used with some Toro and Lawn Boy engines as well. This product is sourced from the original manufacturer and ships individually. Any parts needed to make the repairs included in this manual will have to be purchased separately.

This spring brake is a genuine Midwest Engine part that can be used as a replacement part for outdoor appliances with small engines, including lawn mowers, chipper shredders, snowblowers, and other such appliances. Spring brakes are a braking system employed a large, coiled spring that is kept under high tension; the control valves attached to the spring brake are the mechanism by which the spring brake is released.If the spring brake has been damaged, is malfunctioning, or is in a state of disrepair, this will manifest in the form of a sudden, volatile eruption from the air brake chamber. This is a dangerous state for a small engine, so repair should be conducted immediately. Additionally, a new spring brake part should be ordered before any attempt to use the appliance without a proper repair. Remember to always wear gloves when handling, repairing, and operating outdoor equipment, and stay safe around the small engine of the appliance if the spring brake has malfunctioned and caused a dangerous situation.This spring brake is compatible with the brands Briggs and Stratton, Cub Cadet, and Toro.

This fuel tank is a replacement part that is OEM sourced directly from the manufacturer for use in trimmers. The fuel tank holds the gas that powers the machine when in use. It is a metal part that is designed to withstand heavy use and the weather; however, over time, it may become damaged or corroded and need to be replaced. This replacement fuel tank assembly comes with the gaskets, fuel cap, and fastening screws needed for installation.Before replacing the fuel tank assembly, make sure the engine is cool to touch. Wear work gloves and safety goggles for protection. Empty all fuel out of the damaged tank into a safe receptacle, but remember that fuel from the damaged tank may have contaminants in it and should not be reused. Remove the breather tube grommet and disconnect the fuel line. Remove the screws holding the damaged tank to the trimmer. Align the new fuel tank and install the gaskets to seal the connection to the trimmer. Secure the fuel tank with the new screws. Fill the new fuel tank with fresh gas.This fuel tank assembly is a metal, 3-quart tank that is designed for use on Briggs and Stratton trimmers.

The ball bearing is a standard hardware part with multiple applications on various lawn and garden machines. The bearing is typically used in a position where it can reduce friction between two rotating components. This exposes them to constant wear, heat, vibration, friction, and pressure, causing them to wear out and become a part of routine maintenance for many machines. In the event that ball bearings fail, they will typically affect the operation of whatever they are attached to, or they could create squealing noises or other sounds from the machine. A prompt replacement with this genuine ball bearing will prevent the risk of further damage. This genuine OEM replacement part is manufactured by Murray and designed to work with more than 150 snowblowers and tractors from Snapper, Simplicity, and Murray. Buyers should check their owner's manual for the location and application of this ball bearing. This is made of durable metal and sold individually. Those who need several bearings will have to buy multiple quantities. Pliers and a screwdriver are required to complete the repair.

This self-tapping hex screw is designed to be used on various components of lawnmowers and snowblowers. It can also be used for many other things that require a self-tapping screw. It can secure wood, metal, brick, and plastic materials together. Self-tapping hex screws do not require a pilot hole as the screw makes it on its own. Only metal will require a pre-drilled hole to use the hex screw.A quick visual inspection will give insight into whether a hex screw needs to be replaced. Sometimes they can break or become damaged over time. In other cases, the self-tapping screw may become loose and will not hold materials together in the appropriate way. Some screw heads also get stripped and will require replacement. If a hex screw is damaged, a hex wrench can be used to remove it. The replacement hex screw can then be inserted and tightened to faster materials back together.This self-tapping hex screw can be used with lawnmowers, lawn tractors, and snow blowers made by Snapper, Murray, Briggs & Stratton, Craftsman, and Simplicity. It is a genuine OEM product directly sourced from the manufacturer. It comes as an individual screw.