Parts for Frigidaire FCRG3083ASA: Burner Parts

If your gas range burners won't ignite or won't shut off completely, the gas valve likely needs replacement. This repair restores safe burner operation.

Burner won't turn on or light? This gas valve controls gas flow to surface burners on your range. Common fix for non-functioning burners. Moderate DIY.

Fix a burner that won't light or sparks without gas flow. This surface burner valve controls gas to one burner. Replace if knob turns but burner won't ignite.

Controls gas flow to individual cooktop burners. Replace if valve is leaking, damaged, or worn from extended use. Mounts directly to burner assembly.

Controls gas flow to individual surface burners on your gas range. Replace a jammed, worn, or leaking valve to restore proper burner operation and control.

Gas burners won't ignite or igniter clicks continuously? The spark module generates the electrical spark to light burners. Direct plug-in repair.

Replace a cracked or corroded oval burner crown on your 10,000-BTU gas range burner. Restores even heating and reliable ignition. Verify fit with your model.

Surface burner crown that mounts on sealed gas burners to distribute gas through flame ports. Replace if worn, clogged, cracked, or missing.

Decorative cap that sits atop your gas cooktop's extra-large burner head. Replace if cracked, chipped, discolored, or missing to restore appearance.

Medium burner crown for gas cooktops and ranges. Sits atop the burner base to shape and distribute flame. Replace if cracked, chipped, or damaged.

Small crown-style burner cap for gas cooktops. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or missing.

Oven won't heat or takes forever to preheat? This hot surface igniter lights the bake burner in gas ranges. Moderate DIY repair, about 30 minutes.

Oven won't heat or takes too long to preheat? This ignitor/orifice assembly restores proper gas flow and ignition for reliable oven heating.

Oven won't heat or takes forever to preheat? This hot surface igniter glows to ignite your gas range's bake burner, restoring consistent oven heating.

Burner won't light or flame is uneven? This ignitor and orifice assembly restores spark and gas flow. Moderately easy DIY repair for gas ranges.

This replacement tube routes water inside the refrigerator to the dispenser or ice maker, restoring proper water delivery and reducing the risk of leaks when the original tube is cracked or damaged. What it does:

• Channels water from the supply/valve to the dispenser or ice maker
• Replaces cracked, brittle, or kinked tubing that can cause leaks
• Helps restore normal dispenser or ice maker water flow when tubing is the issue
• Works as a direct-fit replacement when listed for your model

• Turn off the refrigerator and shut off the water supply before starting.
• Handle the tube gently; avoid sharp bends or kinks when routing.
• Use the original clamps or replace clips to secure connections and prevent leaks.
• After installation, restore water and power and check all connections for leaks.

This replacement drain tube routes defrost and condensation water from the freezer/evaporator area to the refrigerator drain pan to help prevent pooling and ice buildup. It restores proper water drainage when the original tube is cracked or clogged. What it does

• Channels defrost and condensation water away from the evaporator to the drain pan
• Helps prevent water pooling or leaks inside the fresh food or freezer compartments
• Reduces ice buildup around the evaporator by keeping the drain path clear
• Commonly replaced when the original tube is cracked, split, crushed, or clogged

• Inspect the drain trough and drain hole for debris before installing the new tube
• Seat both ends of the tube firmly; avoid sharp bends or kinks that can restrict flow
• Disconnect power before accessing internal refrigerator components to avoid injury

Regulates gas flow from the supply line to your range burners. Replace if cracked, leaking, or damaged to restore proper fuel control and flame size.

Snap-on burner cap for gas cooktops and ranges. Restores finished appearance and protects components. Replace if cracked, chipped, or missing.

Plastic cap cover for gas range burner assemblies. Replaces cracked, melted, or missing caps that expose fasteners. Restores finished appearance.

Replacement burner cap for gas cooktops and ranges. Covers and protects the burner assembly. Needed when original cap is cracked, broken, or missing.

Replacement burner cap for gas cooktops and ranges. Covers the burner assembly for proper flame distribution. Needed when original is cracked or missing.

Replace a cracked, chipped, or missing burner cap on your gas range or cooktop. Restores a clean look and protects the burner assembly underneath.

Fixes no water to dispenser or ice maker issues. This water inlet valve controls flow to your refrigerator's ice maker and water dispenser system.

Fix an oven that won't heat or takes too long to preheat. This igniter glows but may be too weak to open the gas valve. DIY repair in under an hour.

Replacement mounting bracket for gas ranges. Secures panels and components in place. Install when original is cracked, bent, broken, or missing.

Fix water pooling or leaks inside your gas range with this evaporator drain tube. Channels defrost water from evaporator to drain pan. Easy DIY repair.

If your gas range dispenser isn't filling or leaks water, the water fill tube may be cracked or disconnected. This tube routes water to your dispenser.

Supplies gas from the manifold to the burner orifice on your gas range. Replace if cracked, kinked, or leaking to restore proper gas flow to the burner.

Replacement screw for gas range panels and components. Needed when original fastener is missing, stripped, or damaged to restore secure fit and alignment.

This screw is a factory replacement fastener used to secure panels, trim, or internal components so parts stay aligned and stable during normal use. It restores proper fit and reduces rattles from loose hardware. What it does

• Secures panels, brackets, or trim pieces to the appliance chassis
• Restores proper alignment when hardware is missing or worn
• Helps stop vibration or rattling caused by loose or missing fasteners
• Replaces stripped, damaged, or lost screws to allow correct reassembly

• Screw

• Disconnect power and water to the appliance before servicing when applicable
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or part damage
• Wear gloves to protect hands from sharp edges and steady small parts during installation

Replacement mounting screw for ovens and ranges. Secures panels, brackets, trim, and internal components. Replace missing or stripped screws to restore fit.

Converts your gas range from natural gas to liquid propane fuel. Includes all orifices and instructions. Needed when switching fuel types or missing parts.