Parts for Lg WM8000HWA: Cabinet And Control Panel Assembly Parats Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This Leg Adjusting Wrench is a simple tool used to turn and secure appliance leveling legs so washers and dryers sit flat and operate quietly. It makes adjusting legs faster and helps reduce rocking and vibration. What it does:

• Fits over standard appliance leveling legs to raise or lower each corner
• Helps stabilize machines to prevent rocking and uneven operation
• Reduces vibration and noise caused by unlevel appliances
• Useful when installing, moving, or re-leveling washers and dryers

• Turn legs slowly and adjust one corner at a time until the appliance sits level.
• Unplug the appliance (and shut off gas supply for gas dryers) before performing major moves or checks.
• Use caution to avoid pinching fingers when lowering legs; keep hands clear of pinch points.
• Check for damaged feet or mounting hardware and replace as needed.

This front cover is the outer housing panel that protects internal components and gives the appliance a finished appearance. It restores the unit's exterior fit and helps keep dirt and debris away from controls and internal parts. What it does:

• Replaces a cracked, dented, or missing front panel to restore proper protection and appearance
• Shields internal controls, filters, and electrical components from dust and foreign objects
• Helps maintain proper airflow path by covering the appliance face where applicable
• Reduces vibration noise caused by loose or damaged exterior panels

• One front cover (outer housing panel) as shown

• Remove power and unplug the appliance before starting any work
• Handle the cover carefully to avoid scratching painted surfaces; use a soft blanket or towel during installation
• Some models require removing adjacent trim or fasteners—keep all screws and clips for reassembly

This rear cover replaces the cabinet back panel that protects internal components and helps maintain proper airflow. Restores enclosure integrity and reduces noise or debris entry when the original cover is cracked, warped, or missing. What it does:

• Shields motors, wiring and controls from dust, lint and accidental contact.
• Directs airflow path and helps avoid airflow-related performance issues.
• Reduces vibration noise caused by loose or damaged back panels.
• Prevents small objects from entering the appliance rear and creating hazards.

• One rear cover (cabinet back) as shown.

• Disconnect power (unplug or shut off breaker) before attempting any repairs.
• Access requires moving the appliance and removing exterior fasteners—keep track of screws and clips.
• Inspect surrounding seals and mounting points; replace any damaged hardware to ensure a secure fit.

This holder is a small mounting bracket that secures internal components and keeps assemblies aligned for reliable operation. It replaces a worn or broken bracket to stop rattling and prevent parts from shifting. What it does

• Secures and positions nearby components or assemblies to maintain correct alignment
• Prevents vibration, rattling, or intermittent contact caused by a loose or cracked bracket
• Restores proper spacing so sensors, panels, or moving parts operate smoothly
• Helps prevent further wear or damage from misaligned parts

• One holder as shown

• Turn off power and disconnect the appliance before attempting any repairs
• Installation typically requires basic hand tools; save removed screws and clips for reassembly

The Shipping Bolt is an OEM part for LG washing machines, designed to secure the washing machine's drum during transportation. These bolts are important for preventing damage to the drum and suspension system by immobilizing the drum, thereby avoiding any excessive movement or vibrations that could occur while moving the appliance. 

Causes of a bad shipping bolt can include improper removal during installation, damage from handling, or degradation over time if it was left in place during operation. A damaged or missing shipping bolt can lead to issues with the washing machine's drum alignment and overall stability.

Symptoms that indicate the shipping bolts need removal or installation include:

• Excessive noise or vibrations during operation, suggesting the bolts were not removed after installation.
• Damage to the washing machine's drum or suspension system after moving the appliance without the bolts properly installed.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

This top plate assembly is the upper exterior/interior panel that protects internal components and helps maintain proper airflow and fit on the appliance. Replaces a damaged or dented top plate to restore protective coverage and appearance. What it does:

• Shields internal parts from debris and accidental contact
• Helps direct airflow and maintain correct clearance for components
• Restores the appliance's exterior fit and finish after impact or corrosion
• Can reduce vibration noise when properly secured

• One top plate assembly

• Disconnect power before starting any repair to avoid shock or injury
• Handle with care to avoid sharp edges; gloves recommended
• Align mounting tabs and fasteners; secure with original screws or hardware

Designed to be installed on washing machine units, this is a display control board. This part features the digital display as well as all of the buttons to activate washing cycles. The display control board then communicates the chosen cycle to the main control board.In the event that the digital display stops working, this part will need to be replaced. There are also other symptoms of a faulty display control board, including the buttons no longer activating the cycle. In some cases, the washing machine will not start, won't fill with water, won't spin, or will not drain the water. Unplug the washing machine from its power source before attempting to replace this part.This part is a high-quality, genuine OEM replacement part. It is compatible with washing machines that are manufactured by LG. This part is sold individually and is sourced straight from the manufacturer.

This door hinge bracket mounts the hinge to the washer's front cabinet, keeping the door aligned so it closes and seals properly. A bent or broken bracket can lead to door sagging, poor latching, or leaks at the door.

• Secures the door hinge to the washer's front panel/cabinet
• Supports door weight to maintain alignment
• Helps preserve proper door-to-gasket contact for sealing
• Typical symptoms: door sags or rubs, won't close/latch, or water leaks at the door

• Disconnect power and shut off water before servicing.
• Support the door before removing hinge/bracket screws to prevent strain.
• Transfer the hinge to the new bracket and reinstall using existing hardware.
• Align the door and ensure latch engagement and gasket seal before fully tightening.

The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.

You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.

Symptoms of a bad outer door boot seal clamp include:

• Water leaks from the door area during the wash cycle
• Loose or shifting door boot seal
• Difficulty in closing the washing machine door securely

This OEM LG part is also compatible with Sears/Kenmore.

This hinge bracket secures and supports a refrigerator/freezer door hinge, helping keep the door aligned and closing properly. It replaces a worn or damaged bracket to restore stable door movement and consistent sealing. What it does:

• Provides a mounting point for the door hinge to keep the door aligned
• Helps maintain proper door seal and prevents sagging or misalignment
• Commonly replaces cracked, bent, or broken brackets that cause uneven door gaps
• Supports smooth opening/closing and reduces stress on the hinge assembly

• Disconnect power and empty the door shelves before starting; support the door to prevent dropping
• Use appropriate hand tools; avoid overtightening fasteners to prevent damage
• Inspect hinge pins and surrounding parts; replace any worn components for best results

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This outer door frame is the replacement trim that fits around a refrigerator/freezer door, restoring a clean appearance and providing a finished edge for the door. It helps cover internal components and supports the door's exterior styling. What it does:

• Replaces damaged, cracked or warped outer door trim to improve appearance and seal integrity
• Covers the door edge and conceals internal door components for a finished look
• Helps maintain proper alignment of the door outer surface
• Compatible with factory latch and hinge mounting points when correctly installed

• Remove power to the appliance and empty the door before starting work
• Installation typically requires removing the interior door panel and transferring door hardware; keep fasteners organized
• Handle the frame carefully to avoid scratching the finish; use protective gloves and non-marring tools

This inner door frame is the molded liner that supports shelves and seals inside the refrigerator/freezer door, restoring structural fit and appearance. Replacing a damaged inner frame helps shelves mount securely and keeps the door assembly stable. What it does:

• Replaces a cracked, warped, or broken inner door liner that no longer supports door components
• Restores proper alignment and mounting points for door shelves and bins
• Helps maintain the door's internal structure so seals and components sit correctly
• Addresses symptoms like visible cracks, loose or sagging shelves, and a rattling or unstable door interior

• One door inner frame / inner liner

• Disconnect power to the appliance and empty the door before starting
• Remove door shelves and fasteners to access the inner frame; support the door while working
• Use common hand tools; follow OEM service instructions if available
• Inspect door seals and mounting hardware during reassembly; do not overtighten fasteners

This genuine replacement door handle restores a secure, easy-to-grip opening for your refrigerator door. Durable finish matches the original styling and helps keep the door functional and accessible. What it does:

• Replaces a broken, cracked, loose, or missing refrigerator door handle
• Provides a solid grip for opening and closing the door smoothly
• Restores original alignment to prevent door stress and improve sealing
• Matches OEM fit and finish for a factory appearance

• Basic hand tools required; keep mounting screws if reusing or replace if damaged
• Support the door while removing/installing the handle to avoid dropping or misalignment
• Disconnect power or follow manufacturer safety guidance if removing the door is required
• Tighten fasteners to secure the handle but avoid over-torquing to prevent damage

This locker hook engages the appliance's latch/lock mechanism to keep the door securely closed during operation. Replacing a worn or bent hook restores reliable latching and helps prevent nuisance door/lock errors and cycle interruptions.

• Interfaces with the door lock/latch to secure the door during use
• Allows the safety interlock to confirm the door is closed
• Common symptoms: door won't latch or stay closed, needing to hold/push door to start, door/lock error messages
• Physical signs of failure: bent hook, worn contact surface, or cracked/broken mounting ears

• Disconnect power; turn off water supply if applicable
• Access the hook location on the door or cabinet/tub (varies by model); remove mounting screws/clips
• Transfer any reusable hardware; align the new hook so it mates cleanly with the latch/lock and tighten fasteners
• Close the door to verify smooth engagement before running a cycle

The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.

Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.

Symptoms of a bad Magnetic Door Plunger include:

• The washing machine door not staying closed during cycles.
• The machine failing to start due to a door sensor not detecting closure.
• Random pausing of the machine during operation if the door unlatches.

This OEM LG part is also compatible with Sears/Kenmore.

This base bracket mounts to the washer's lower frame to hold associated components securely in place. By keeping parts properly anchored, it helps maintain alignment and stability during operation to minimize vibration and noise.

• Attaches to the washer base and provides a mounting point for designated hardware
• Helps keep assemblies from shifting during agitation and spin
• Supports smooth, quieter operation by reducing vibration and rattling
• Common signs of failure include a bent or cracked bracket, loose/misaligned parts, or unusual noises from the base area

• Disconnect power and water supply before servicing; move the appliance for safe access
• Carefully tip or lay the washer back on protective padding; use a helper for stability
• Note the bracket's orientation and reuse existing mounting hardware as applicable
• Tighten fasteners securely and verify nearby parts have proper clearance before test run

This parts assembly is a model-specific collection of small components used to complete or restore proper installation and fit. It replaces missing or worn pieces so affected areas mount securely and operate as designed. What it does:

• Provides the factory-specified hardware/trim for your model
• Restores secure mounting and proper alignment of affected components
• Helps eliminate rattles, gaps, or looseness caused by missing hardware
• Useful after service or moves when original pieces are lost

• One parts assembly

• Disconnect power; shut off water or gas before service
• Wear gloves; watch for sharp edges and small parts
• Reference your model's service/installation manual to match and place each piece
• Install hardware snugly; avoid overtightening plastic components

This replacement knob assembly restores tactile control for a range or cooktop control. It provides a secure grip and clear detent positions so you can set burner or surface settings reliably. What it does:

• Replaces a worn, cracked, or missing control knob to regain safe, predictable control
• Engages the shaft and detents so settings stay put during use
• Helps eliminate slipping or difficulty turning the control
• Matches original fit and function for direct replacement

• One knob assembly as shown

• Turn power/gas to the appliance off before servicing; follow appliance manufacturer safety instructions
• Remove the old knob by pulling straight off the control shaft; press the new knob onto the shaft until it seats
• Wear work gloves to protect hands from sharp edges during access

Restore stable, level support with this replacement leg assembly. The adjustable foot steadies the unit on uneven floors, reducing vibration and rattling while allowing precise leveling for proper alignment and smooth, reliable operation.

• Provides adjustable support at the base of the unit
• Helps keep the appliance level on uneven or sloped floors
• Reduces wobble, vibration, and rattling noises
• Promotes proper door alignment and closure
• Replaces stripped, cracked, or missing leg assemblies

• Disconnect power; shut off water supply if applicable
• Carefully tilt and support the appliance to access the leg area
• Unthread the old leg; hand-thread the new assembly to avoid cross-threading, then fine-adjust with a wrench
• Level front-to-back and side-to-side; confirm stability before use

This part may be black or gray in color.

This cover cap is a small trim piece that restores a finished appearance and protects exposed fasteners on the appliance. It hides mounting hardware and helps keep dust and moisture out of seams for a cleaner look. What it does:

• Covers and protects exposed screws or fasteners to improve appearance
• Helps prevent dirt and debris from entering small openings around the fastener
• Reduces direct moisture contact with metal fasteners to slow corrosion
• Restores a finished, uniform look to damaged or missing trim areas

• Disconnect power and water before servicing the appliance.
• Typically snaps into place; use a flat tool carefully to pry out the old cap if needed.
• Align tabs and press firmly until the cap clicks into position; avoid forcing to prevent breakage.
• Inspect surrounding trim for damage and replace the cap if cracked or deformed.

This frame assembly replaces the outer trim around the appliance door to restore fit, finish, and proper sealing. It refreshes the appearance and helps the door close and align correctly after damage or wear. What it does:

• Provides the outer structural trim for the appliance door and secures door components in place
• Restores proper door alignment and helps maintain a consistent seal around the door edge
• Fixes cosmetic damage such as cracks, dents, or broken trim that affect appearance
• Can reduce rattling or misalignment caused by a warped or damaged frame

• Disconnect power and, if applicable, gas before starting any repair
• Handle glass and trim carefully to avoid damage or injury; use gloves and eye protection
• Minor disassembly of the door or surrounding trim panels is typically required; keep screws and small parts organized

This water level pressure switch senses the washer tub's water level and signals the control to start or stop filling. It restores accurate fill detection for proper wash cycles and helps prevent overfilling or improper operation. What it does:

• Detects water level via a vacuum hose and tells the control board when to stop filling
• Helps prevent overfill, underfill, and related cycle interruptions
• Can resolve symptoms like washer not filling, overfilling, or stopping mid-cycle
• Works as the sensing interface between the tub and the control system

• One water level pressure switch assembly

• Disconnect power and shut off water supply before replacing the part
• Note the vacuum hose routing and electrical connector locations before removal
• Handle the small vacuum hose and plastic fittings gently to avoid damage or air leaks

This power cord assembly restores a secure electrical connection to your appliance so it can safely receive power. It replaces a worn, damaged, or faulty cord to help prevent interruptions and poor contact during normal use. What it does:

• Re-establishes the appliance's main power connection for reliable operation
• Replaces frayed, burnt, or damaged cord insulation and terminals
• Can stop intermittent power loss, sparking, or poor contact at the cord connection
• Provides the correct OEM-fit electrical cord and connector interface

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Tighten terminal screws securely and avoid pinching or kinking the cord.

The Door Switch is an OEM part for LG washing machines. It is responsible for detecting whether the washer door is securely closed or open. The door switch ensures that the washer operates only when the door is properly closed and latched.

A bad washer door switch can occur due to wear and tear over time, electrical malfunctions, or physical damage. If the door switch fails, it can prevent the washer from starting or cause it to stop mid-cycle, resulting in inconvenience and disruption to your laundry routine.

Symptoms of a bad washer door switch include:

• Washer not starting or powering on.
• Washer not completing cycles or stopping abruptly.
• Inability to lock or unlock the washer door.

This OEM LG part can also be used on Kenmore/Sears appliances.

A washer's primary control board is the main control unit of the appliance. If the primary control board malfunctions, the washer may lose all main functions. These functions include spin, drain, and other cycle options. If the problem ends up being the control board, these functions will return when a replacement control board is installed. Begin the installation by unplugging the washer from its power source. This part is for an LG front loading washing machine, and installation may be more technical than a normal top-loader.This LG washer primary control board assembly is a genuine OEM product sourced directly from LG. The part listed is only available individually and is not included with any other components. This part is only compatible with LG washing machines.

This protective cover shields internal components and wiring from dirt, moisture and accidental contact, helping keep the appliance safe and functioning properly. It's a small replacement panel that restores the appliance's factory protection. What it does:

• Covers and protects internal parts and wiring from debris and accidental impact
• Prevents loose components from rattling or shifting during operation
• Helps maintain proper spacing and alignment of nearby panels and clips
• Addresses symptoms like visible damage, missing cover, exposed wiring, or unusual noise from loose trim

• Disconnect power before starting any repair to avoid shock or injury
• Typically secures with clips or a few screws; use basic hand tools and take care not to strip fasteners
• Inspect mounting tabs and surrounding trim for damage; replace any broken clips before reassembly

This noise filter assembly conditions incoming AC power to reduce electromagnetic interference before it reaches the control system. A failed line filter can cause no power, intermittent shutdowns, or breaker trips; replacing restores stable, reliable operation. What it does:

• Filters EMI/RFI on the power line to help protect sensitive control electronics
• Helps prevent interference that can cause no power, flickering display, or random resets
• A failing filter may trip a breaker/GFCI when the unit is plugged in or starts a cycle
• Visual clues can include scorch marks, burnt odor, or a cracked/bulged filter body

• 1 noise filter assembly

• Disconnect power before servicing; verify the outlet is de-energized
• Access is typically near the power cord entry behind a rear/top panel (varies by model)
• Label or photograph wire positions and transfer connections one by one; secure the ground
• Mount firmly and route wires to avoid pinching; reassemble and test for proper operation

• Line filter, EMI filter, RFI filter

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.