Parts for Kenmore 796.41393610 (79641393610, 796 41393610): Cabinet And Control Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This replacement bolt assembly restores a secure connection between internal components, helping maintain proper alignment and quiet, stable operation. Use it to replace hardware that is missing, stripped, or damaged to keep parts firmly fastened. What it does

• Fastens mating parts according to the original design
• Helps prevent loosening that can lead to vibration or rattling noises
• Maintains alignment for reliable performance
• Replaces corroded, cross-threaded, or missing hardware

• One bolt assembly

• Disconnect power (and shut off water, if applicable) before servicing
• Support the component being fastened; start threads by hand to avoid cross-threading
• Tighten to manufacturer guidelines; do not overtighten
• Inspect related washers/spacers and replace if worn or distorted

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

This display power control board assembly supplies and controls the front-panel display and user interface so the appliance shows status and responds to touch/button input. It restores display functionality and control feedback when the original board fails. What it does:

• Provides power and signal control for the front-panel display and user interface
• Drives the display backlight and visible indicators so status information is shown
• Enables touchpad/buttons to register and send commands to the main control board
• Common symptoms when failing: blank or flickering display, unlit indicators, or unresponsive buttons

• Disconnect power (unplug or switch off breaker) before beginning any work.
• Handle the board by its edges and avoid static discharge—use ESD protection if available.
• Verify connectors are fully seated and mating surfaces are clean before restoring power.

The Outer Door Boot Seal Clamp is an OEM part for LG washing machines. This clamp secures the outer door boot seal, ensuring a tight seal to prevent water leaks during the wash cycle.

You should replace the outer door boot seal clamp if it becomes damaged or loses its tension, which can happen due to regular use, exposure to harsh cleaning agents, or physical wear and tear.

Symptoms of a bad outer door boot seal clamp include:

• Water leaks from the door area during the wash cycle
• Loose or shifting door boot seal
• Difficulty in closing the washing machine door securely

This OEM LG part is also compatible with Sears/Kenmore.

This hinge assembly supports and pivots the appliance door or lid. Replacing a worn or damaged hinge restores smooth operation, keeps the door aligned with the cabinet, and helps ensure proper closing and consistent seal engagement.

• Provides the pivot point for the door/lid to open and close
• Supports door weight to maintain alignment with the frame
• Helps the door close flush to engage latches/seal properly
• Common symptoms: door sags or rubs, won't close fully or pops open, excessive play, squeaking or binding

• Disconnect power and support the door before removing hinge fasteners
• Mark or photograph hinge orientation and any spacers/washers for accurate reassembly
• Transfer any reusable components from the old hinge, if present
• Tighten fasteners securely and adjust alignment as needed

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Door Strike is an OEM part for LG washing machines. This part ensures that the door closes securely and the washer can operate safely. 

Causes of a bad door strike can include regular wear and tear from frequent use, impact or mishandling that leads to bending or breaking, or issues with the door alignment that cause undue stress on the strike. 

Symptoms of a bad Door Strike include:

• The door not latching properly
• The washer not starting or stopping mid-cycle due to door issues
• Leaks around the door during operation
• Visible damage or wear to the strike

This OEM LG part is also compatible with some Kenmore models.

The Magnetic Door Plunger is an OEM part for LG washing machines. It is designed to securely hold the door in a closed position during the operation cycle, employing a magnet mechanism for enhanced reliability. The plunger ensures that the door latch is properly engaged, preventing the machine from running if the door is not closed correctly.

Causes of a bad Magnetic Door Plunger can include wear and tear from constant use, failure of the magnetic mechanism due to exposure to moisture or mechanical damage, or a misalignment that prevents the door from closing properly.

Symptoms of a bad Magnetic Door Plunger include:

• The washing machine door not staying closed during cycles.
• The machine failing to start due to a door sensor not detecting closure.
• Random pausing of the machine during operation if the door unlatches.

This OEM LG part is also compatible with Sears/Kenmore.

This Knob Assembly restores tactile control to your appliance's rotary selector, letting you choose settings reliably. It replaces a cracked, stripped, or missing control knob so you can operate cycles and temperature settings as intended. What it does

• Replaces the appliance's control knob used to select cycles, temperatures, or settings.
• Fixes symptoms like a loose, cracked, or missing knob that won't turn or won't engage the control shaft.
• Helps restore precise user input when selector clicks or stops are worn.
• Fits onto the control shaft and provides the external interface for selector adjustment.

• One knob assembly only.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated.
• If knob does not fit smoothly, do not force.

Restore stable, level support with this replacement leg assembly. The adjustable foot steadies the unit on uneven floors, reducing vibration and rattling while allowing precise leveling for proper alignment and smooth, reliable operation.

• Provides adjustable support at the base of the unit
• Helps keep the appliance level on uneven or sloped floors
• Reduces wobble, vibration, and rattling noises
• Promotes proper door alignment and closure
• Replaces stripped, cracked, or missing leg assemblies

• Disconnect power; shut off water supply if applicable
• Carefully tilt and support the appliance to access the leg area
• Unthread the old leg; hand-thread the new assembly to avoid cross-threading, then fine-adjust with a wrench
• Level front-to-back and side-to-side; confirm stability before use

This part may be black or gray in color.

This water level pressure switch senses the washer tub's water level and signals the control to start or stop filling. It restores accurate fill detection for proper wash cycles and helps prevent overfilling or improper operation. What it does:

• Detects water level via a vacuum hose and tells the control board when to stop filling
• Helps prevent overfill, underfill, and related cycle interruptions
• Can resolve symptoms like washer not filling, overfilling, or stopping mid-cycle
• Works as the sensing interface between the tub and the control system

• One water level pressure switch assembly

• Disconnect power and shut off water supply before replacing the part
• Note the vacuum hose routing and electrical connector locations before removal
• Handle the small vacuum hose and plastic fittings gently to avoid damage or air leaks

The Door Switch is an OEM part for LG washing machines. It is responsible for detecting whether the washer door is securely closed or open. The door switch ensures that the washer operates only when the door is properly closed and latched.

A bad washer door switch can occur due to wear and tear over time, electrical malfunctions, or physical damage. If the door switch fails, it can prevent the washer from starting or cause it to stop mid-cycle, resulting in inconvenience and disruption to your laundry routine.

Symptoms of a bad washer door switch include:

• Washer not starting or powering on.
• Washer not completing cycles or stopping abruptly.
• Inability to lock or unlock the washer door.

This OEM LG part can also be used on Kenmore/Sears appliances.

This protective cover shields internal components and wiring from dirt, moisture and accidental contact, helping keep the appliance safe and functioning properly. It's a small replacement panel that restores the appliance's factory protection. What it does:

• Covers and protects internal parts and wiring from debris and accidental impact
• Prevents loose components from rattling or shifting during operation
• Helps maintain proper spacing and alignment of nearby panels and clips
• Addresses symptoms like visible damage, missing cover, exposed wiring, or unusual noise from loose trim

• Disconnect power before starting any repair to avoid shock or injury
• Typically secures with clips or a few screws; use basic hand tools and take care not to strip fasteners
• Inspect mounting tabs and surrounding trim for damage; replace any broken clips before reassembly

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.