Parts for Ge WCVH4815K0MS: 02 - Cabinet, Cover & Top Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This liquid detergent insert fits into the washer's dispenser to meter and release liquid detergent at the correct time. Replacing a missing or damaged insert helps prevent early drain-off and supports consistent cleaning performance.

• Adapts the main detergent compartment for use with liquid detergent
• Helps control flow so detergent releases during the wash cycle, not immediately
• Promotes proper dispensing and reduces residue left in the dispenser
• Common clues it's needed: insert missing/broken, liquid runs straight into the tub, or detergent remains in the cup after a cycle

• Disconnect power to the washer before servicing
• Pull out the dispenser, then lift out the old insert
• Align and press the new insert into the detergent compartment until fully seated (follow any "LIQUID"/fill marks)
• Run a quick test cycle to ensure proper dispensing

This EMI filter reduces electrical interference on the appliance's power line to help protect controls and reduce noise that can cause erratic operation. It's a direct-fit replacement when the original line filter is damaged or faulty. What it does:

• Suppresses electromagnetic and radio-frequency interference that can disrupt electronic controls
• Helps prevent electrical noise from feeding back onto household wiring
• Restores proper filtering when the original component is burned, cracked, or shows visible damage

• One EMI filter / line filter

• Disconnect power at the breaker or unplug the appliance before servicing to avoid shock
• Replace only with the exact OEM part or approved equivalent to maintain safety and EMI compliance

This top cover assembly replaces the appliance's damaged or worn top panel to restore a clean, finished appearance and protect the internal controls and wiring from debris. Fits the factory mounting points for a direct replacement. What it does:

• Covers and protects the control area, wiring and internal components from dust and spills
• Restores the appliance's exterior appearance when the original top is dented, cracked or rusted
• Provides the correct mounting surface for the control console and trim pieces
• Helps keep components properly shielded during normal use

• Disconnect power to the appliance before starting any work
• Remove the control console and screws securing the old top; handle edges carefully—they can be sharp
• Align the replacement top to factory mounting points and reattach hardware and any trim

This spring suspension supports the washer tub to help maintain drum alignment and reduce vibration during spin cycles. Replacing a worn spring restores stability and helps cut down on banging, rocking, and excessive movement. What it does:

• Holds the tub in position and absorbs shocks during wash and spin cycles.
• Helps prevent the drum from contacting the cabinet or standing unevenly.
• Commonly replaced when the washer rocks, bangs loudly during spin, or the tub sags.
• Works as a direct suspension component—matches OEM function and placement.

• Disconnect power and turn off the water supply before starting any repairs.
• Relieve tension by supporting the tub or cabinet frame; replace springs one at a time to maintain alignment.
• Use appropriate hand tools (pliers, nut drivers) and wear gloves and eye protection.
• Inspect related suspension components and replace any additional worn parts for best results.

This hanger spring is the replacement spring that helps support and balance a refrigerator/freezer door, restoring proper door alignment and smooth opening/closing. It's a small metal spring that fits into the door hanger assembly. What it does:

• Supports the door hanger assembly so the door stays aligned and balanced
• Helps the door close smoothly and prevents sagging or uneven gaps
• Restores proper tension at the hinge area for reliable door operation
• Commonly replaced when the door feels loose, droops, or won't stay properly seated

• One hanger spring

• Always unplug the appliance or shut off power to avoid injury when servicing
• Support the door before removing hinge components to prevent dropping
• Use basic hand tools; follow the appliance service manual for hinge removal and reassembly

This pressure switch detects and signals water level to the washer control so cycles fill and stop correctly. Replaces a failed level sensor to restore accurate fill control and prevent overfilling or incorrect cycle behavior. What it does

• Senses tub water level via a vacuum hose and tells the control when to stop filling
• Helps prevent overfilling, underfilling, or prolonged fill cycles
• Can cause no-fill, continuous-fill, or incorrect cycle problems when faulty
• Works as the electrical interface between the pressure/vacuum line and the control board

• Disconnect power to the appliance before starting; electrical shock risk
• Drain water and shut off water supply if needed to avoid spills when accessing the part
• Handle the vacuum hose and small fittings carefully; ensure vacuum line is seated and undamaged

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function

This hose guide secures and centers the dryer vent hose to help keep airflow aligned and reduce stress on the hose connection. It helps prevent the vent hose from becoming pinched or disconnected during normal use. What it does:

• Holds the vent/duct hose in place to maintain proper airflow alignment
• Reduces hose kinks and rubbing that can cause wear or air leaks
• Helps limit vibration and hose movement that can loosen the connection
• Addresses symptoms such as a shifting or sagging vent hose, rattling, or reduced vent clearance

• Disconnect power and move the appliance to access the vent area before servicing
• Remove any necessary rear/access panels to reach the hose connection
• Secure the guide in the original mounting location using existing fasteners or screws
• Inspect the vent hose and connection for damage; replace any worn ducting or seals as needed

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Note: The motor in this Pump assembly is Samsung part# DC31-00054A.

This inverter assembly is the control module that powers and regulates the refrigerator compressor, restoring variable-speed operation and helping maintain proper cooling. Install to replace a failed or damaged inverter module. What it does

• Converts and supplies the correct power signals to the compressor so it can run at variable speeds
• Can eliminate error codes or fault indicators related to the inverter/control module
• May reduce abnormal compressor noise or intermittent compressor operation when the inverter is faulty

• One inverter assembly

• Disconnect power at the breaker before starting work
• Handle the board and connectors with care; avoid static discharge and damaged wiring
• Verify connector orientation and secure all plugs before reapplying power

The drain pump hose assembly is an OEM part for GE washers. This assembly includes the drain hose, clamp, and connector, providing a complete installation for efficiently draining water from your GE washer. It is designed to withstand the water flow and pressure, providing a reliable connection between your washer and the drainage system to prevent water leaks or spills in your laundry area.

A bad drain hose assembly can occur due to wear and tear, clogs, or damage to the hose or connectors. If you notice symptoms such as water leaks, slow or incomplete drainage, or visible cracks or leaks in the hose, it may be time to replace the assembly.

Symptoms of a bad drain hose assembly include:

• Water leaks during the wash or spin cycles
• Slow or incomplete drainage
• Visible cracks or leaks in the hose or connectors

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This U-shape drain hose hanger secures the dishwasher drain hose to the cabinet or sink rim so the hose stays in the correct position and helps prevent kinks or improper drainage. A simple replacement that restores proper hose routing. What it does

• Holds the drain hose in a U-shaped loop to maintain proper high-loop or air gap positioning
• Keeps the hose away from sharp edges and hot components to reduce wear
• Helps prevent hose kinking that can cause slow draining or backups
• Useful when existing hanger is cracked, broken, or missing

• One U-shape drain hose hanger

• Turn off power to the appliance before accessing the drain hose area
• Typically installs by clipping or snapping around the hose and attaching to cabinet/sink edge—no special tools required
• Inspect the hose for damage and secure hose routing when replacing the hanger

This drain plug seals the washer tub drain to prevent leaks and keep water inside the tub during normal operation. A simple replacement that restores a proper seal without replacing larger drain assemblies. What it does:

• Seals the drain opening to prevent water leakage from the tub
• Helps maintain proper water containment during fill and wash cycles
• Replaces a cracked, worn, or missing drain plug that causes pooling or dripping
• Works with the tub/drain assembly where a removable plug is used

• Remove power to the appliance before inspecting or replacing the plug
• Access may require removing the washer front panel or tub access panel depending on model
• Press or seat the plug firmly into the drain opening until fully seated; confirm a snug fit
• If you see corrosion, cracks, or damaged mounting surfaces, replace any affected components before returning the unit to service

A small flat metal washer used to secure fasteners and evenly distribute load on washer assemblies — helps maintain proper alignment and prevents fastener wear for reliable appliance operation. What it does:

• Sits under nuts or bolts to spread load and prevent fastener pull-through
• Keeps assemblies tight and reduces loosening from vibration
• Can prevent metal-on-metal wear at mating surfaces
• Common symptom: loose or rattling components near fasteners
• Common symptom: visible corrosion, deformation, or missing washer at a joint

• One flat metal washer

• Unplug the appliance and shut off water supply before accessing internal parts
• Keep track of all fasteners and matching washers when disassembling assemblies
• Use appropriate tools and hand protection; replace any corroded or damaged fasteners

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.