Parts for Ge ZIC360NHBRH: Cabinet - Flush Inset Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Adhesive logo nameplate for refrigerators and freezers. Replaces cracked, peeling, or missing exterior branding plates on appliance doors.

Bottom hinge bushing guides the refrigerator door hinge pin for smooth pivoting. Replace if worn, cracked, or missing to restore proper alignment.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Holds and seals the water filter cartridge, routing water to your dispenser and icemaker. Replace if leaking or water flow is reduced. Verify fit.

Bypass cap allows refrigerator water and ice dispensers to work without a filter installed. Replace if cracked or leaking. Confirm fit with your model.

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Nylon hinge arm secures and guides refrigerator doors for smooth pivoting and alignment. Replace if cracked, broken, or worn to restore door support.

Left-side grill hinge secures your refrigerator's lower access panel. Replace when bent, worn, broken, or missing to restore stable alignment and operation.

Left grille hinge assembly for bottom-mount refrigerators. Replaces broken, cracked, or worn hinge components that secure the grille panel to the door.

Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.

White 12-24 screw secures panels, trim, and brackets inside your refrigerator. Replace missing, stripped, or damaged fasteners to restore stability.

Secures and guides the ice maker assembly to prevent shifting during operation. Replace if cracked, broken, or missing to restore proper alignment.

Plastic tubing that routes water through your refrigerator's system. Replace if cracked, brittle, kinked, or leaking to restore proper flow and prevent damage.

Ice cubes jamming or not dispensing? The stripper comb releases cubes from the ejector fingers during harvest. Moderate DIY, requires partial disassembly.

Ice maker not producing ice or stopped working? This ice maker kit restores ice production. Includes full assembly for harvesting and ejecting ice.

Replacement door closure spring for refrigerators and freezers. Installs in top door mechanism to provide tension for self-closing action. Gold finish.

Ice maker overflowing or producing hollow cubes? This fill cup directs water properly into the ice maker mold. Quick 15-minute DIY repair.

Removable plastic bin that collects and stores ice from your ice maker. Replace if cracked, broken, or missing to restore proper ice storage.

Large freezer basket for bottom-mount refrigerators. Replaces cracked, broken, or missing storage baskets in the freezer compartment. Direct fit.

Slide support assembly that stabilizes and guides your refrigerator freezer drawer. Replace when the original is cracked, broken, or worn to restore alignment.

Freezer drawer slide rail for bottom-mount refrigerators. Replace if drawer is difficult to open, rail is cracked, or drawer jams when sliding out.

Truss head screw for refrigerator assembly and panel mounting. Replace missing, stripped, or damaged screws during repairs or part installations.

Phillips pan head tapping screw for refrigerators and freezers. Secures panels, brackets, and internal components. Replace missing or stripped screws.

Secure refrigerator water lines with this 1/4 inch diameter clamp. Replace if damaged, cracked, or causing leaks. Verify fit with your model number.

Closure assembly panel for bottom-mount refrigerators. Replaces cracked, broken, or missing closure panels that damage the unit's appearance or structure.

Small freezer basket for bottom-mount refrigerators. Organizes frozen items in the freezer drawer. Replace if cracked, broken, or missing. Easy install.

Mounts to the freezer wall to hold the upper basket in place. Replace if broken, missing, or cracked to restore proper alignment and smooth sliding.

Plastic guide that supports and aligns the upper freezer shelf along its track. Replace if cracked, broken, or worn to restore smooth sliding motion.

Upper freezer basket slide rail for bottom-mount refrigerators. Guides the top basket for smooth gliding. Replace if cracked, warped, or broken.

Freezer drawer slide shim for bottom-mount refrigerators. Replaces worn, cracked, or missing shims that support smooth drawer operation.

Replaces the stud spring on refrigerator and freezer doors. Needed when the original spring is broken, worn, or missing, affecting door alignment.

Actuator arm that controls the fresh food door opening mechanism on bottom-mount refrigerators. Replace if cracked, bent, or broken from wear.

Replacement door stop cam riser for freezers and refrigerators. Installs on door hinge to control door swing and positioning. Replace if cracked or worn.

This track shelf is the replacement door shelf track that secures a refrigerator door shelf in place, restoring stable storage and preventing the shelf from shifting or falling during normal use. What it does:

• Provides the mounting channel that a door shelf or retainer sits in to hold items on the refrigerator door
• Replaces a cracked, worn, or broken track that lets a door shelf tilt or slide out
• Restores proper shelf alignment so door bins sit securely and items stay in place
• Compatible with typical snap-in or screw-mounted door shelf assemblies

• Remove all items from the door shelf and, if needed, remove the shelf before replacing the track
• Power off or unplug the appliance only if access requires it; otherwise take care to avoid sharp edges
• Align the track with the door mounting locations and press or secure into place until fully seated
• If hardware is present, retain and reuse existing screws/clips; replace only with manufacturer-specified fasteners

This screw handle trim replaces the small decorative cover that hides and secures the mounting screw on a range/oven handle, restoring a finished look and preventing debris buildup around the screw. What it does:

• Covers the handle mounting screw and provides a clean finished appearance
• Helps keep crumbs and grease out of the screw cavity
• Stops a loose or missing trim from catching on clothing or hands
• Restores cosmetic look after handle removal or damage

• One screw handle trim

• Safety first: unplug the appliance or shut off power to the range before working
• Remove the handle screw, fit the trim over the screw area, then reinstall and tighten the screw securely (do not overtighten)
• Use the correct screwdriver and avoid forcing the trim; check alignment before final tightening
• If the original mounting hardware is damaged, replace it with OEM hardware