Parts for Kitchenaid KUIO18NNXS0: 01 - Cabinet Liner And Door Parts

Replace missing or stripped mounting screws in your refrigerator or ice maker. 8-18 x 1 1/4 inch screw secures panels and components inside the unit.

Replacement door bin for refrigerator interior doors. Holds bottles, condiments, and small items securely. Replace cracked, broken, or missing bins.

Replacement mounting spacer for ice makers. Maintains proper clearance and alignment between components. Replace if cracked, broken, or missing.

8-18 x 1/2 inch mounting screw for refrigerators, washers, dryers, and other appliances. Replace stripped, missing, or damaged screws during repairs.

Restores your ice maker's front appearance. Replaces scratched, dented, or faded outer door panels. Direct-fit black finish panel installs on the exterior.

Secures flexible tubing to fittings on water and drain lines. Replace when clamps lose tension or you find leaks. Confirm fit with your model number.

This replacement cover protects the appliance's internal components and restores the unit's exterior fit and finish. It keeps wiring and controls shielded while improving the appliance's appearance and safe operation. What it does:

• Shields internal components and wiring from dust, debris, and impact
• Restores a secure, finished exterior where the original cover is cracked or broken
• Helps prevent accidental contact with controls and internal parts
• Can reduce rattles caused by a loose or damaged cover

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use basic hand tools; handle edges carefully to avoid cuts
• Keep mounting hardware and clips: replace only items explicitly listed as included

Secures hoses to fittings and prevents leaks in your washer. Replace if worn, loose, or missing to stop drips and keep water connections tight. Confirm fit.

Secures the axle to keep rotating parts aligned in your ice maker. Replace if worn or broken to reduce noise and vibration. Confirm fit by model number.

This is a replacement screw used to securely fasten appliance panels and small components. It restores secure attachment and stops noise or loose parts caused by missing or damaged fasteners. What it does

• Holds trim, panels, brackets or components in place to prevent movement and rattling
• Restores proper alignment when a mounting screw is missing or stripped
• Helps maintain safe, stable operation by keeping parts secured
• Works wherever the original OEM screw of this part number is specified

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not over-torque; overtightening can strip threads or damage parts
• Keep small parts away from children and pets during installation

Protective edge guard grommet for ice maker cabinet panels. Cushions and protects panel edges from wear, chafing, and vibration. Replace if cracked or missing.

Wiring channel for ice makers. Organizes and protects electrical wires inside the unit. Replace if cracked, broken, or missing to secure wiring properly.

Drain tube for ice makers. Channels water from the drain to the reservoir. Replace if cracked, split, or leaking to prevent water damage.

Missing or damaged ice scoop? This replacement scoop fits most ice makers and provides sanitary ice retrieval. Measures 4" x 10.5" for easy handling.

8-18 x 5/8 inch screw for securing control housing, transformer, and thermistor clamp in ice makers. Replace missing or stripped screws during repairs.

Anchors screws in thin metal or plastic panels to secure trim, covers, and consoles. Replace worn, cracked, or missing grommets that no longer hold tight.

Black lower wrap panel for freestanding ice makers. Replaces cracked, faded, or damaged exterior trim. Restores clean appearance to base.

Spring bracket for ice makers. Secures internal spring mechanism in place. Replace if bracket is bent, cracked, broken, or missing to restore stability.

8-32 x 1/2 inch mounting screw for refrigerators. Secures panels, brackets, and components. Replace lost, stripped, or corroded screws.

Replacement door hinge spring for ice makers. Provides tension to support and balance the door for smooth opening and controlled closing. Needed when spring is broken, stretched, or missing.

Loose panels or rattling components? This mounting screw secures body panels and electronics in appliances. Quick 5-minute fix for most models.

Edge guard grommet for ice makers. Protects edges and panels from sharp metal contact. Replace if cracked, worn, missing, or damaged to restore fit.

Electrical shield for ice makers. Protects wiring and electrical components from moisture and debris. Replace if cracked, damaged, or missing.

Top panel gasket seals the ice maker's upper compartment to maintain proper temperature and prevent air leaks. Replace if torn, cracked, or loose.

Replace a cracked or faded ice maker front grille to restore appearance and ensure proper airflow. Fits 18-inch built-in units. Easy installation.

Mounting screw for refrigerators. Secures internal components and panels. Replace if stripped, missing, or damaged during repairs. 8 x 1-1/4 inch size.

Replacement lower stainless steel panel for ice makers. Covers the kick/toe area to restore appearance and protect internal components. Ideal for cracked or worn panels.

Replacement door strike for ice maker machines. Secures and aligns the door for proper closure. Needed when original is cracked, broken, or missing.

Replacement mounting screw that secures panels and components in place. Install this fastener when the original is missing, stripped, or damaged.

Replacement screw for ice maker assembly. Secures internal components and panels. Needed when original screws are stripped, missing, or damaged during repair.

This is a replacement screw used to securely fasten appliance panels and small components. It restores secure attachment and stops noise or loose parts caused by missing or damaged fasteners. What it does

• Holds trim, panels, brackets or components in place to prevent movement and rattling
• Restores proper alignment when a mounting screw is missing or stripped
• Helps maintain safe, stable operation by keeping parts secured
• Works wherever the original OEM screw of this part number is specified

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not over-torque; overtightening can strip threads or damage parts
• Keep small parts away from children and pets during installation

Replacement screw that secures panels, brackets, and trim to appliance cabinets. Restores reliable hold when original hardware is stripped or missing.

This replacement access panel cover restores a finished appearance and protects internal components from dust and accidental contact. Fits in the original mounting location to keep the appliance safe and secure. What it does:

• Shields internal parts from dirt and debris to help maintain proper operation
• Hides wiring and mechanisms for a clean, factory look
• Prevents accidental contact with moving or electrical components
• Stops drafts and reduces rattling when the original cover is cracked or missing

• One cover

• Disconnect power before attempting any service
• Remove fasteners or clips holding the old cover, then position and secure the replacement
• Keep original screws or clips; replace only with manufacturer-recommended fasteners if needed

Replacement mounting screw for securing components and housings in place. Order a new screw if yours is stripped, missing, or damaged during repairs.