Parts for Frigidaire FFBN1721TV0: Cabinet Parts

This is a genuine replacement mounting screw that secures appliance panels and components to restore stable fit and prevent rattling or loose parts. A simple, direct fix for hardware that has come loose or gone missing. What it does:

• Secures panels, trim, brackets, or components to maintain proper alignment and prevent movement
• Stops rattling or vibration caused by loose hardware
• Supports safe operation by keeping covers and guards fastened
• Used where the original mounting screw has worn, corroded, or been lost

• One mounting screw

• Turn off power to the appliance and unplug before servicing to avoid injury
• Use the correct screwdriver or driver bit to avoid stripping the head
• Replace only like-for-like;
• If you encounter damaged threads or stripped holes,

This evaporator temperature sensor monitors coil temperature so your refrigerator can control cooling and defrost cycles more accurately. Replacing a failed sensor restores proper temperature sensing and helps prevent overcooling or missed defrosts. What it does:

• Measures evaporator/coil temperature so the control board can regulate cooling and defrost timing
• Can cause warm refrigerator/freezer compartments or long run cycles when faulty
• May lead to frost buildup or failed defrosts if the control can't read coil temperature
• Works as a low-voltage thermistor input to the appliance control

• One temperature sensor (thermistor) as shown

• Disconnect power to the appliance before servicing
• Located near or on the evaporator coil; handle the sensor and wiring gently
• Follow OEM wiring and routing; secure sensor so it contacts the evaporator as intended
• Test the sensor with a multimeter per OEM resistance/temperature chart

This replacement refrigerator interior lamp provides countertop visibility by restoring the light inside the fresh-food compartment. It fits common Frigidaire-style refrigerator lamp sockets and restores safe, usable illumination. What it does

• Replaces a burned-out or dim interior fridge light so you can see food and controls clearly
• Helps eliminate dark spots inside the fresh-food compartment
• Works with the refrigerator's existing lamp housing and switch to restore normal lighting
• Safe, simple swap when the original lamp no longer lights

• Disconnect power to the appliance before replacing the lamp to avoid shock
• Allow the old lamp to cool before handling; use a cloth or gloves to remove and install the bulb
• Remove the lamp cover or housing per your model's instructions, replace the bulb, then reattach the cover

The Sensor is an OEM part for Frigidaire refrigerators that helps monitor and regulate the temperature inside your refrigerator, ensuring that your food stays fresh and properly cooled. It is responsible for providing temperature readings to the refrigerator's control system to maintain the desired temperature settings.

A bad sensor can be caused by electrical issues, component failure, or physical damage. Signs of a faulty temperature sensor include inconsistent temperature readings, excessively cold or warm refrigerator compartments, or a refrigerator that fails to cool properly.

Symptoms of a bad sensor include:

• Inconsistent temperature readings
• Refrigerator too warm or too cold
• Food spoilage due to improper cooling

Replace your malfunctioning or damaged refrigerator sensor with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This evaporator fan motor circulates cold air inside the freezer and refrigerator compartments to maintain even temperatures and efficient cooling. Replacing a worn motor restores airflow and helps the appliance reach set temperatures reliably. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator coil and through the cabinet
• Restores airflow when a noisy, failing, or seized fan causes reduced cooling
• Helps prevent uneven temperatures and frost buildup caused by poor circulation
• Quietly operates during compressor cycles to support efficient cooling performance

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access usually requires removing the freezer evaporator cover or rear panel; keep screws and fasteners organized
• Transfer the fan blade and any mounting hardware from the old motor if not supplied

This air duct plate assembly channels air inside the appliance to maintain proper airflow and temperature control. It helps the unit run efficiently by directing air where it's needed. What it does:

• Directs and channels airflow through the appliance's air path
• Helps maintain consistent operating temperature and cycle performance
• Can prevent air recirculation that leads to poor cooling/heating
• Reduce noise from turbulent airflow when installed correctly

• Disconnect power (and water, if applicable) before beginning any service
• Remove the access panel(s) to reach the old duct plate; retain fasteners for reassembly
• Handle edges carefully; metal parts can be sharp
• Secure all fasteners; test operation after reassembly

This air duct plate assembly channels air inside the appliance to maintain proper airflow and temperature control. It helps the unit run efficiently by directing air where it's needed. What it does:

• Directs and channels airflow through the appliance's air path
• Helps maintain consistent operating temperature and cycle performance
• Can prevent air recirculation that leads to poor cooling/heating
• Reduce noise from turbulent airflow when installed correctly

• Disconnect power (and water, if applicable) before beginning any service
• Remove the access panel(s) to reach the old duct plate; retain fasteners for reassembly
• Handle edges carefully; metal parts can be sharp
• Secure all fasteners; test operation after reassembly

This air duct plate assembly channels air inside the appliance to maintain proper airflow and temperature control. It helps the unit run efficiently by directing air where it's needed. What it does:

• Directs and channels airflow through the appliance's air path
• Helps maintain consistent operating temperature and cycle performance
• Can prevent air recirculation that leads to poor cooling/heating
• Reduce noise from turbulent airflow when installed correctly

• Disconnect power (and water, if applicable) before beginning any service
• Remove the access panel(s) to reach the old duct plate; retain fasteners for reassembly
• Handle edges carefully; metal parts can be sharp
• Secure all fasteners; test operation after reassembly

This replacement cabinet insulation panel restores the refrigerator's thermal barrier to help maintain internal temperatures and reduce frost buildup. It fits behind interior panels to improve cold retention and overall efficiency. What it does:

• Replaces damaged or missing insulation that can allow warm air into the cabinet
• Helps reduce frost and ice buildup around the evaporator area
• Supports consistent internal temperatures for better food preservation
• Minimizes heat transfer from the room into the refrigerated compartment

• One insulation panel

• Disconnect power before beginning any repair to avoid electrical shock
• Remove interior panels or shelving as needed to access the insulation area
• Handle insulation with gloves to avoid irritation; avoid compressing or bunching material
• Reinstall panels and seals fully to ensure a proper thermal barrier; check fit before restoring power

This evaporator temperature sensor monitors the refrigerator evaporator temperature so the control board can manage defrost cycles and cooling. Replacing a faulty sensor restores accurate temperature readings and helps prevent overcooling or ice buildup. What it does:

• Senses evaporator temperature and sends a resistance/voltage signal to the control board
• Helps the control decide when to run defrost and compressor cycles
• Commonly causes long run times, warm temperatures, or frequent frosting when failing
• Used in the fridge/freezer cooling system rather than user temperature knobs

• One evaporator temperature sensor

• Disconnect power before servicing to avoid shock or damage
• Handle the thermistor element and wiring gently; do not kink or cut leads
• Locate and remove mounting clips or screws; match connector orientation when reinstalling

The Defrost Sensor is an OEM part for Frigidaire refrigerators. It is responsible for monitoring the temperature in the freezer and initiating the defrost cycle when necessary. It works with the defrost heater and control board to regulate the defrost cycle, preventing the buildup of ice and frost in the freezer compartment.

A bad defrost sensor can be caused by electrical issues, sensor failure, or physical damage. Common signs of a malfunctioning sensor include excessive frost or ice buildup in the freezer, inconsistent temperature control, or the refrigerator not cooling properly.

Symptoms of a faulty defrost sensor include:

• Excessive frost or ice in the freezer
• Inconsistent temperature control 
• Inadequate cooling  

Replace your defective or damaged defrost temperature sensor with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.