Parts for Briggs & Stratton 44K777-0113-E1: Carburetor, Exhaust System, Fuel Supply, Kit / Gasket Set-Carburetor Parts

This is a fuel line replacement intended to keep a lawnmower's engine running smoothly. It is long enough to make a couple of fuel lines, just cut the fuel line to the desired length and keep the rest as a spare. When a mower doesn't start easily or performs poorly when running, the fuel delivery system may have a problem and will need repair. The fuel line that supplies gas from the tank to the carburetor may be cracked or broken. When this occurs, it is best to replace the fuel line before it becomes a flammable hazard. This is an OEM replacement fuel line sourced from the manufacturer and is sold individually. This replacement part is compatible with different Briggs & Stratton mowers. Remember to use work gloves and drain the gas tank before the installation of this part.

This fuel filter is a genuine Midwest Engine part, sold individually. A fuel filter can be used as a replacement part for outdoor appliances including lawn mowers, snowblowers, generators, and wood chippers. This genuine OEM part is made out of durable, high quality materials.If the engine won't start, it is possible that the fuel filter has been clogged and is not allowing the flow of fuel into the carburetor, where it is mixed with air in order to ignite the spark plugs and power on the engine.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This fuel filter is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Tecumseh, Snapper, MTD, and Simplicity.

This fuel pump is a genuine Midwest Engine part, sold individually. This fuel pump can be used as a replacement part or a lawn tractor. The purpose of a fuel pump is to provide a passageway for fuel to channel through the fuel line and into the fuel tank.The fuel pump of a lawn mower or a lawn tractor might eventually have to be replaced in the event that it suffers damage and cannot perform its crucial function. If the fuel pump has been torn, scraped, punctured, or eroded from general wear and tear with long-term use or as the result of a direct impact with a hard object such as a rock or a curb, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel pump is compatible with the following outdoor appliance brands: Midwest Engine, Briggs & Stratton, Cub Cadet, Simplicity, and Toro.

A hose clamp serves the basic purpose of holding together two connecting hoses. This is a crucial job in an engine. Since there are so many connecting tubes and hoses transferring oil and fuel within an engine, a leak could prove catastrophic. It could not only cause the engine to malfunction but could also become a fire hazard. Replacing a hose clamp is an easy job, though the exact process will depend on where the connection is located. A pair of pliers may be needed. This is a genuine OEM replacement part and will work with a wide range of appliances, such as pressure washers, engines, generators, tractors, mowers, blowers, shredders, and chippers from Murray, Toro, Briggs & Stratton, Snapper, MTD, Lawn-Boy, or Simplicity. This part ships individually.

This replacement exhaust gasket is a certified genuine OEM part for a lawn tractor engine. This gasket helps to seal off the exhaust from the carburetor. For an engine to run, it must first mix fuel with air to prepare the fuel for combustion. By sealing off the exhaust, this gasket allows for fresh air to enter into the carburetor from outside the engine rather than from the exhaust. Gaskets often degrade over time due to the stress of pressure and heat. If the exhaust gasket breaks its seal, it can affect the engine's overall performance. Be on the lookout for an especially noisy engine that doesn't provide as much power and is less fuel efficient. There may also be a noticeable burning smell coming from the engine. To replace the exhaust gasket, use a socket wrench and wrench set to remove the air filter and blower housings, then remove the exhaust manifold and switch out the gasket. This replacement exhaust gasket is compatible with engines made by Toro, Briggs & Stratton, Murray, Snapper, and Simplicity. It comes sourced directly from its original manufacturer and does not include any additional hardware.

This replacement vacuum is identical to the original vacuum hose that comes with the machine. The purpose of the vacuum hose is to maintain proper airflow through the engine. The part is made from durable plastic, but it could still require replacement. If the vacuum hose becomes damaged or cracked, it could allow air into other parts of the system, where it should not be. This could cause the engine to have problems running properly or not to run at all. Owners should make it a point to regularly check the vacuum hose, as well as other parts of the engine, to ensure that everything is in good working order. If an issue is found with the vacuum hose, it should be replaced immediately. The genuine OEM vacuum hose can be used to replace the hose on lawn tractors and other small engines. Compatible brands include Briggs & Stratton, Cub Cadet, Toro, Murray, MTD, and Simplicity. Owners should check their manuals before buying to ensure they are getting the proper hose for their make and model.