Parts for Kenmore 795.72493611 (79572493611, 795 72493611): Case Parts

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.

Replacement mounting screw for refrigerator assembly. Secures components and panels inside your fridge. Order a new screw if yours is stripped or missing.

Replacement mounting screw for refrigerator panels, brackets, and internal assemblies. Restores secure fastening when original screw is missing, stripped, or damaged.

Replacement screw for refrigerator assembly. Used to secure panels, shelves, or internal components. Order a new screw if the original is stripped or missing.

This replacement customized screw secures internal panels and components to restore proper fit and reduce movement. A small but essential fastener for repairs that stop rattling and prevent loose parts from causing damage. What it does:

• Fastens panels, brackets, or trim so parts stay aligned and stable
• Stops vibration-related noise caused by loose fasteners
• Helps prevent parts from shifting or falling during operation
• Replaces stripped or missing screws to restore proper assembly

• Disconnect power before servicing the appliance to avoid shock or injury
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten until snug—do not overtighten, which can strip threads or crack components
• Inspect mating threads and replace if damaged; replace only with the exact OEM screw

Replacement mounting screw for refrigerator panels, brackets, and assemblies. Needed when original fastener is stripped, worn, or missing.

This is a customized screw used to secure appliance components and panels. It provides a direct replacement for a specific factory fastener so panels and assemblies stay properly mounted and rattle-free. What it does:

• Secures panels, brackets, or small assemblies in place
• Prevents parts from shifting or vibrating during operation
• Helps restore proper alignment after repairs or disassembly
• Commonly used where a specific thread, length, or head style is required

• One customized screw — matches the OEM fastener

• Disconnect power to the appliance before servicing and work on a cool appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Install hand-tight and finish with light torque; do not overtighten to prevent damage
• Keep loose fasteners away from children and dispose of packaging responsibly

Secures panels, brackets, and assemblies inside your refrigerator. Replace when original screws are missing, stripped, or damaged to restore proper fit.

Replacement freezer door handle for bottom-mount refrigerators. Installs on the freezer compartment door. Order if your handle is cracked or broken.

Lower cover assembly protects the refrigerator's lower cabinet area from debris. Replace if cracked, broken, or missing to restore appearance.

This lower skirt is the front lower trim panel that restores a clean, finished look and protects the appliance's lower cabinet area from debris and accidental contact. It replaces damaged, cracked or missing trim for a secure fit and appearance. What it does:

• Covers and protects the appliance's lower front area and internal components from dust and impacts
• Restores a flush, finished appearance when the original skirt is warped, cracked or broken
• Helps prevent gaps that can let small items fall under the appliance
• Reduces rattles or rubbing caused by a loose or damaged lower trim

• Disconnect power (and water if applicable) before starting any repair
• Remove the kick plate or front panel fasteners as needed to access mounting points
• Align the new skirt with the mounting tabs and secure with the original screws or clips
• Handle edges carefully; keep removed fasteners and test fit before final tightening

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Multi-flow air duct assembly for bottom-mount refrigerators. Replaces cracked, broken, or damaged ducts that direct airflow between compartments.

Fix noisy or vibrating refrigerator with this motor bracket assembly. Secures the compressor motor in place. Moderate DIY repair, 30-45 minutes.

Fix uneven cooling in your refrigerator with this fan grill assembly. Circulates air to maintain consistent temperatures throughout compartments.

Secures and supports shelves inside your refrigerator. Replace if cracked, broken, or missing to properly hold shelves in place and restore stability.

Fix erratic operation or cycling issues in your refrigerator with this DC drive motor. Restores proper rotation and performance when the original motor fails.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.

Fix a refrigerator that won't cool or has no power with this control board assembly. Solves temperature control issues and electrical failures.

Shelf rail holder for bottom-mount refrigerators. Secures sliding shelves in place. Replace if cracked, broken, or missing to restore proper shelf support.

Upper door hinge assembly for bottom-mount refrigerators. Mounts at the top of the cabinet to support the door. Replace if cracked, broken, or lost.

Upper door hinge for refrigerators. Mounts on the right side to secure the door. Replace if cracked, broken, or missing to restore proper door support.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

Fix refrigerator not cooling or freezing issues with this evaporator coil assembly. Restores proper temperature control. Moderate DIY repair, 1-2 hours.

Refrigerator not cooling and compressor is warm? This overload protector prevents compressor damage during electrical overloads or overheating.

Compressor running hot or error code 22? This thermistor assembly monitors compressor temperature to prevent overheating. 10-minute DIY repair.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Precision pin for refrigerator drawer slide roller bearings. Replaces bent, worn, or missing pins that cause drawers to stick or drag. Restores smooth operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

Refrigerator drip tray that collects water and condensation beneath the appliance. Replace if your drip tray is cracked, warped, or missing.

If your refrigerator isn't cooling properly, a faulty condenser assembly may be the cause. This part restores electrical connections and airflow for reliable cooling performance.

Replace your broken or cracked refrigerator fan grill assembly. Protective cover that installs over the evaporator fan in the freezer compartment.

Fix poor cooling or uneven temperatures with this refrigerator fan grill assembly. Restores proper airflow and protects the fan from debris.

Refrigerator not cooling evenly or making noise? This DC fan motor restores proper airflow when your circulation fan fails or runs intermittently.

This motor bracket secures and aligns the appliance motor, providing stable mounting and helping reduce vibration for reliable operation. It's a direct-fit replacement when the existing motor mount is cracked, bent, or loose. What it does:

• Provides a fixed mounting point to keep the motor properly aligned with the drive system
• Dampens movement to reduce vibration and noise during operation
• Prevents motor shift that can cause belt misalignment or rubbing
• Restores secure fastener locations for reliable motor performance

• One motor bracket

• Disconnect power (and water, if applicable) before beginning any repairs
• Use the original fasteners or OEM-equivalent hardware to secure the bracket
• After installation, verify motor alignment and run a test cycle to ensure quiet, vibration-free operation

This motor bracket secures the appliance motor to the cabinet, keeping the motor aligned and stable for reliable operation. It's a direct-fit replacement when the original bracket is cracked, bent, or missing. What it does:

• Provides a secure mounting point to hold the motor in proper position
• Maintains motor alignment to prevent vibration, noise, or premature wear
• Helps ensure attachments (pulleys, fans, or gears) stay correctly engaged
• Commonly replaced when the bracket is damaged, rusted, or deformed

• Disconnect power to the appliance before beginning any repair.
• Verify bracket orientation and fastener locations before removal; retain any original screws or clips unless replacements are provided.
• Handle sharp edges carefully and use proper tools; minimal mechanical skill required.
• Inspect and replace those components as needed for a secure repair.

Powers the dispenser cover door mechanism on your refrigerator. Replace if the motor has worn out, failed, or no longer operates the cover smoothly.

Fan shroud assembly for refrigerator evaporator compartment. Directs airflow and protects fan components. Replace if cracked, broken, or missing.

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

LED light assembly for refrigerators. Installs in fresh food or freezer compartment. Replace if cracked, dim, or non-functional lighting module.

Replaces cracked or yellowed interior light lens. Protects bulb from moisture and impact while ensuring even illumination. Verify fit by model number.

Refrigerator won't cool or compressor won't start? This run capacitor provides the electrical boost needed for smooth compressor operation. DIY repair.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

Fixes refrigerator power loss, sparking, or intermittent operation. This power cord assembly restores safe electrical connection from wall outlet to appliance.

Fix a refrigerator that won't cool, run, or respond to controls with this main control board. Processes sensor inputs and powers components. DIY repair.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Dim or uneven refrigerator lighting? This interior light cover assembly shields the bulb and diffuses light evenly. Simple 5-minute snap-in repair.

Freezer not cooling below 24°F or refrigerator running too warm? This defrost thermostat sensor monitors temperature and signals the control board.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Allows water to flow directly to your dispenser and ice maker without filtration. Install when choosing not to use a water filter. Confirm fit by model.

Removes impurities and contaminants from water and ice. Replace every 6 months or 200 gallons for clean, fresh-tasting water. Verify fit by model.