Parts for Lg LMXS30776D/00: Case Parts

Removes contaminants for clean, fresh-tasting water and ice. Replace every 6 months or 200 gallons to maintain water quality. Verify fit with your model.

Mounting screw secures panels, brackets, and interior components in your refrigerator. Replace stripped, missing, or damaged fasteners to prevent rattling.

Replacement mounting screw for securing panels, brackets, and assembliance components. Needed when original screws are missing, stripped, or damaged.

Replacement mounting screw for refrigerators. Secures panels, shelves, or components inside your fridge. Order if original is stripped, missing, or lost.

Water pooling under your refrigerator? A damaged drain tube assembly causes leaks and water buildup. This direct-fit part restores proper drainage.

Fix water pooling or leaking inside your refrigerator by replacing a cracked or clogged drain tube assembly. Channels defrost water to the drain pan.

Adjustable leveling leg that threads into the refrigerator base frame to support and stabilize the unit. Replace worn, broken, or missing legs.

Connector duct assembly for bottom-mount refrigerators. Installs between compartments to direct airflow. Replace if cracked, broken, or missing.

Fix refrigerator cooling issues or unusual noises with this DC motor assembly. Common repair for failed evaporator fan motors in bottom-mount models.

Molded exterior panel that shields internal components. Replace when cracked or missing to restore proper fit and protection. Verify fit with your model.

Fix a refrigerator not cooling properly or running too warm with this temperature sensor. Monitors internal temps to maintain proper cooling.

Replaces damaged or missing hinge cover trim on your refrigerator. Restores clean appearance and prevents items from catching on exposed hinge area.

If your refrigerator's ice maker or dispenser isn't advancing properly, a worn drive gear is often the cause. This direct-fit gear restores smooth rotation.

Rail guide assembly for bottom-mount refrigerators. Installs on drawer slides to guide smooth operation. Replace if cracked, broken, or missing.

Drawer rail guide assembly for bottom-mount refrigerators. Mounts inside the cabinet to guide drawer movement. Replace if cracked, broken, or worn.

Fix intermittent operation, error codes, or complete power loss with this refrigerator wiring harness. Restores electrical connections between components.

Center hinge assembly for bottom-mount refrigerators. Installs between freezer and fresh food doors. Replace if cracked, broken, or worn out.

Lower door hinge assembly supports and pivots your refrigerator door for smooth operation. Replace when doors sag, misalign, or don't seal properly. Confirm fit with your model number before ordering.

Secures and aligns your refrigerator door for smooth opening and proper sealing. Replace if door sags or closes unevenly. Verify fit with your model number.

Secures and aligns the top refrigerator door for smooth opening and proper sealing. Replace when door sags or won't close properly. Verify fit with your model.

NOTE: This part also requires software update kit CJT30000002. DO NOT INSTALL WITHOUT UPDATING SOFTWARE. Call for more information.

Refrigerator not cooling properly? This condenser coil assembly releases heat to keep your fridge cold. Professional installation recommended for evacuation.

Refrigerator not cooling or freezing over? This evaporator assembly circulates refrigerant to absorb heat and restore proper temperatures in your fridge.

Fix a freezer that won't cool or has excessive frost buildup. This evaporator assembly restores cold-air circulation and defrost performance.

Refrigerator not cooling or running warm? This compressor start relay and overload assembly regulates temperature and controls cooling cycles. DIY-friendly fix.

Refrigerator stopped cooling after power outage? The compressor overload protector prevents overheating damage. Easy DIY fix when compressor won't run.

Fix erratic temperature readings or sensor errors with this PTC sensor cover. Shields the sensor from debris and damage. Simple 5-minute snap-on repair.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Water pooling inside your refrigerator? This drip tray collects condensate and defrost water to prevent leaks. Direct-fit replacement part.

Fixes uneven cooling and scraping noises by directing airflow from the fan. This guide restores proper air circulation throughout your refrigerator.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Refrigerator making unusual grinding noises or exposed machinery? This machinery cover assembly shields internal components from debris and damage.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix uneven cooling or frozen food in fresh food section with this refrigerator air damper. Controls airflow between compartments to balance temperatures.

Fix a refrigerator that won't turn off the light or runs constantly with this door switch magnet. Works with reed switches. Simple DIY replacement.

Refrigerator not cooling or running warm? A faulty condenser fan motor assembly prevents proper airflow across the condenser. Includes motor and blade.

Refrigerator not cooling or running warm? A faulty condenser fan motor assembly prevents proper airflow across the condenser. Includes motor and blade.

Fix refrigerator cooling issues or unusual noises with this DC motor assembly. Common repair for failed evaporator fan motors in bottom-mount models.

Fix a warm fridge or RF error code with this evaporator fan motor. Repairs grinding noises and restores proper cooling. 2-hour DIY install with video.

Replace your refrigerator's shroud cover if it's cracked, broken, or missing. This protective cover installs over internal components to provide a clean finish.

Fix unusual noise or vibration from your refrigerator with this motor bracket. Secures the motor assembly for quiet operation. DIY-friendly repair.

Replace a damaged or broken motor cover in your refrigerator. This protective cover shields the motor assembly from dust and debris. Simple repair.

Protects your refrigerator's light bulb from moisture and damage. Replace if cracked, discolored, or broken to maintain proper lighting and safety.

Fix noisy refrigerator operation with this evaporator motor grommet. Reduces vibrations and quiets motor noise. Moderately easy DIY repair.

Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.

Fix freezer light staying on or not turning on when door opens. This magnetic reed switch detects door position. Located on freezer wall, easy DIY.

Supports and stabilizes your refrigerator door for proper alignment. Replace if bracket is cracked, broken, or causing door misalignment issues.

Fix error code 1F or eF1 on your refrigerator with this ice maker fan motor assembly. Restores proper ice production and air circulation.

Dryer not heating or heating inconsistently? This heater sheath protects the heating element assembly. Restores safe, consistent drying performance.

Fixes freezer icing up on back wall and ice cubes not freezing solid. Replaces the pantry drawer temperature control heater in your refrigerator.

LED light assembly that mounts in the freezer compartment to illuminate the bottom drawer. Replace if the light housing is cracked, broken, or missing.

LED light assembly for bottom-mount refrigerators. Installs inside compartment to illuminate interior. Replace when cracked, dim, or not illuminating.

Replaces worn LED backlight strip in your refrigerator display. Restores screen brightness and clarity when images appear dim or uneven. Verify fit with your model number before ordering.

Refrigerator won't start or compressor struggles to run? The run capacitor provides the power boost needed to start and maintain compressor operation.

If your refrigerator won't power on or has a damaged cord, this power cord assembly restores safe electrical connection. Direct-fit replacement.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

Refrigerator not cooling, lights off, or won't start? Main control board coordinates power and signals to motors, fans, and sensors. Moderate repair.

Fix temperature inconsistencies or error codes with this refrigerator sensor cover. Protects temperature sensors for accurate cooling. Simple 10-minute fix.

Supports the drum for smooth rotation and proper alignment. Replace when you hear squealing or notice drum wobble to restore quiet operation. Verify fit with your model number.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Fix loud fan noise or poor cooling in your refrigerator. This evaporator fan grille protects the fan and directs airflow. Replaces cracked or warped grilles.

Fix erratic temperatures, warm spots, or excessive run time in your refrigerator. This temperature sensor monitors compartment temps and feeds data to the control board.

Fridge freezing food or not cooling? This temperature sensor monitors internal temps and signals the control board. Fixes ER FF errors. Easy install.

Fix inconsistent heating or burner ignition issues with this gas valve assembly. Controls gas flow to the burner system for reliable flame control.

Dim or uneven refrigerator lighting? This LED light cover protects the bulb assembly and diffuses light evenly. Direct-fit lens restores visibility.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.