Parts for Craftsman 358381700: Chassis / Bar / Handle Parts

This knob choke can be used to replace broken or deteriorating knob chokes to help keep chainsaws and saws running efficiently. Knob chokes are essential for ensuring that fuel-air mixtures remain enriched by reducing the flow of air within the engine. Knob chokes experience significant wear and tear throughout their lifetime, which is why regular replacement is essential to ensure that power equipment doesn't deteriorate. While replacing a knob choke, refer to the instructions provided by specific equipment manufacturers to ensure correct application. This part is made of high-quality durable plastic to guarantee a longer lifespan.This knob choke is a genuine OEM Husqvarna replacement part that has been sourced directly from the manufacturer. This replacement knob choke fits various different models of Poulan and Husqvarna chainsaws and saws. Please note this knob choke is sold individually.

This part is a replacement spring ignition switch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty spring ignition switch in a variety of gas chainsaw models.This part is essential for applying tension to the throttle control lever. If the spring ignition switch is malfunctioning, the chainsaw will not work properly, and the user will not have sufficient control over the throttle. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. Proper tools are required to replace this part. For more accurate information on how and where to install this spring ignition switch, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this spring ignition switch is suitable for use on several different models of gas chain saws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is a lever ignition switch, often called an ignition lever. The lever ignition switch is used on chainsaws. This part is a switch starts and stops the chainsaw. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.A new lever ignition switch may be needed if the engine will not start, if the engine suddenly dies, if the chainsaw only runs intermittently, or if the kill-switch is not engaging. A Phillips screwdriver, Torx driver, flat-head screwdriver, and ratchet/socket set will be needed to perform this replacement.This lever ignition switch is a genuine Husqvarna part. It is sold individually. This particular lever ignition switch is compatible with gas chain saws that are manufactured by Husqvarna, Poulan, and Jonsered.

This is a replacement chainsaw fuel line kit that is compatible with a range of chainsaw models. Fuel lines are tubes used to feed fuel to the carburetor and to return unused fuel into the chainsaw's gas tank. If there is damage to the fuel line, it could present large problems including leaks. This will waste fuel and it can be dangerous. If there are issues with the fuel line, replace it right away.The plastic tubes can start to wear down over time. They might crack and break, or they may no longer have tight connections. Make sure that the chainsaw engine is cool before starting any repairs.The replacement chainsaw fuel line kit will work as a replacement for select models of chainsaws from Husqvarna and Craftsman. The kit is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

This is a genuine fuel pickup assembly that is an integral part of many models of chainsaws from major manufacturers. This component is part of the fuel system and ensures the gasoline makes it from the fuel tank to the chainsaw's carburetor. When the primer bulb is pressed, it causes air to leave the carburetor so it can be filled with fuel. The extra fuel moves back into the tank using a return line. This part is made from quality materials but can wear out or become damaged, which will require it to be replaced.Basic tools like an Allen wrench and a screwdriver may be needed to replace the broken or damaged fuel pickup assembly. A pair of work gloves is also useful for the process. Make sure the chainsaw is powered off and placed on a level surface. Disconnect the spark plug wire to prevent the engine from powering on. Disassemble the tool to gain access to the fuel pickup assembly so it can be replaced with a new component.This is an authentic OEM replacement part that is sourced directly from the manufacturer. This fuel pickup assembly is sold individually. The part is designed to be compatible with chainsaws manufactured by Craftsman, Husqvarna, and Poulan.

This clutch washer kid includes a clutch, a washer, and a clip. A washer helps to protect the engine from unwanted pressure at the joint where two parts connect. Washers help to spread the pressure evenly so that the fastener doesn’t move, which would cause corrosion and friction. Washers can wear down or corrode over time, leading to unwanted pressure in the chainsaw’s engine. Based on the location of this washer, replacing it may require different steps to take apart the engine. Be sure that the engine has cooled completely before attempting any repairs. This part is compatible with Poulan and Craftsman chainsaws and is a genuine OEM part sourced directly from the manufacturer.

A chainsaw clutch drum works by driving the chain along with the gear. The gear and clutch drum are engaged by the clutch when the engine’s speed picks up. The chainsaw clutch drum likely needs replacement when the chain isn’t turning. This repair is easy to complete and can be accomplished with minimal tools. The hardest part of this repair might be the removal of the old chainsaw clutch drum in cases where they are misshaped or warped from damage from continual friction. Many will work well past the point when they should be replaced, so it is essential to monitor your chainsaw parts for noticeable signs of disrepair or inefficiency. This chainsaw clutch drum is compatible with Craftsman and Poulan chainsaws. It is a high-quality genuine OEM clutch consisting of durable metal.

The clutch connects to the crankshaft of the chainsaw engine. The crankshaft turns the up and down motion of the pistols into a rotation, which turns the drum and makes the chain go around. As the inner drum of the clutch starts to wear out, it puts more and more pressure on the springs, causing them to break. So, without a properly functioning clutch, the engine will run, but the blade will not turn. Replace the chainsaw clutch assembly using our genuine OEM part sourced directly from the manufacturer. A socket wrench and a screwdriver will be needed. Start by removing the chain brake cover to gain access to the clutch. Remove the chain and bar and then bind the piston in place. From there, use a screwdriver to remove and replace the clutch. This part is compatible with Poulan or Craftsman brand products. Sold individually.

This large clutch washer is a genuine Husqvarna part, sold individually. This large clutch washer can be used as a replacement part for a chainsaw. The purpose of a large clutch washer for a chainsaw is to space out several components of the appliance so its fasteners do not create friction and cause damage within the internal parts of the chainsaw.The large clutch washer might have to be replaced at some point within the standard lifespan of a chainsaw. Washers are small parts that can be easily lost or misplaced, and if it is found that a washer has disappeared, it should be replaced immediately. If the washer is stripped to the point that it cannot serve as a fastening component, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This large clutch washer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

This is a genuine replacement ignition kit that is an identical fit for select chainsaws. It contains the ignition coil and engine flywheel as a single part, which attach to the top of the crankshaft. The ignition coil attaches to the spark plug and is responsible for transmitting the spark current to the engine, which engages the flywheel and powers the engine so that the chainsaw can run. These parts are subject to a lot of regular use and can become worn over time. The ignition coil could short out or experience other electrical problems, or the flywheel could fail. In either case, this dual part can provide the exact fit for compatible saws. This genuine OEM ignition kit is manufactured by Poulan and is compatible with over 150 chainsaws from Poulan and Husqvarna. This ignition kit is made of durable metal and rubber components, and only includes the two parts discussed here. The spark plug and other starter components will require a separate purchase. Owners should always disengage the engine and wear gloves to protect their hands when performing engine repairs like this. The ignition coil is sometimes called the armature-magneto, but both terms refer to the ignition module of this kit.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This part is a recoil starter hub spring that is used on chainsaws. The recoil starter hub spring connects the starter hub and pulley and applies tension to the pulley.A new recoil starter hub spring may be needed if there is no longer tension. If any component of the retail starter hub spring is cracked, broken, or damaged, it will need to be replaced. The recoil starter hub spring may become worn out over time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This recoil starter hub spring is a genuine Husqvarna part. It is sold individually. This particular recoil starter hub spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Poulan brand.

This replacement part is an oil vent assembly. This is a genuine replacement part made by Husqvarna. This part works directly with the oil vent to ensure the proper settings and operation of the engine and machine as a whole. A new oil vent assembly might be needed if the current one is missing or damaged in any way. If the vent has been obstructed or is too dirty to clean it might be time to replace this part. Work gloves are recommended when repairing or replacing this part as the oil can stain hands and be hard to clean. It is also recommended that the engine be powered off before attempting to replace this part. This oil vent assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This handguard is made to be used on several models of chainsaws by major lawn and garden manufacturers. The purpose of the handguard is to engage the chain brake if it is pushed forward. A secondary function of the handguard is to protect the user's hands from an injury that could be caused by the bar and chain on the chainsaw. The part is made of durable plastic but can become damaged over time, through use, or impact.A visual inspection will show if the handguard has become cracked, fallen off, or is broken in other ways. If this occurs, the handguard will need to be replaced before using the chainsaw. The replacement should be done while using work gloves. Place the chainsaw on a flat surface and remove the spark plug wire first. A socket set and a screwdriver can be used to remove the old handguard. Install the new one and reassemble other parts before use.This is a genuine OEM replacement part directly sourced from the manufacturer. It's sold as an individual part. The component is designed for use with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.

This part is a handguard spring for a chainsaw. The handguard spring returns the handguard to the forward position when the handguard is released.A new handguard spring may be needed if the handguard no longer returns to the forward position when the handguard is released. If the spring is broken in any way, it will no longer work properly and will need to be replaced. The spring could become damaged or break after normal use due to normal wear and tear over time. If this is the case, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This handguard spring is a genuine Husqvarna part. It is sold individually. This particular handguard spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.

This chain brake is made to connect above the drum of a chainsaw. It has a metal band that goes around the drum and a handguard that also connects to the brake. When the guard is pressed forward, the brake band tightens on the clutch drum, making the chain stop immediately. The brake is pre-assembled and consists of both metal and plastic parts. The spring, brake band, and linkage are all metal, and the housing is plastic. A common chain brake problem is the brake band becoming worn out or damaged. This causes the brake to no longer stop the chain fast enough or at all. This can be incredibly dangerous, so it’s important to check the brake regularly. Installing a new chain brake is straightforward with this genuine OEM part sourced directly from the manufacturer. Just remove the clutch cover assembly, take off the old chain brake, and screw in the new kit. Be sure to wear gloves and let the engine cool completely before making repairs. Compatible with Craftsman, Poulan, and Poulan Pro chainsaws. Sold individually.

This is an OEM replacement chainsaw bar plate for select brands and models of chainsaws. The chainsaw bar plate is responsible for holding the chainsaw guide bar in place and providing a secure foundation to reduce vibrations, while also spacing the bar from the chassis. The plate itself can become loose over time, or can even become damaged and lead to things like oil leaks from a loose chain. If the bar plate is in disrepair or not functioning correctly, it should be replaced immediately. this genuine replacement part can provide an exact fit for compatible saws. This OEM bar plate is manufactured by Poulan and will fit a number of chainsaws from the brand Craftsman, as well as those from Husqvarna and Jonsered. This durable part is made from high-quality metal and can be replaced with only a few tools. The plate is sold individually as a single unit. Hardware is not included and will have to be purchased separately if it is required. Always wear gloves and disconnect the spark plug before beginning repairs on chainsaws.

This replacement part is a clutch assembly cover and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Clutch assembly covers are an important part to most lawn equipment. This specific part is intended to cover the parts of the clutch assembly that can be dangerous to the operator of the machine. A new clutch assembly cover might be needed if the current one is damaged or broken in any way including being cracked or dented. It is possible that the clutch assembly cover can become broken after years of normal wear and tear. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This is a genuine replacement front handle that can be used on certain models of chainsaws. The front handle, or front handle assembly as it is sometimes known, is designed to offer users a place to hold onto the saw in addition to the rear handle. The front handle assembly also helps with maneuvering the saw and ensuring that the exact cut is made. This is a durable plastic part, but since it is exposed to the elements and potential impact damage, it can become broken or damaged over time. This will require a replacement to ensure that owners can continue to maneuver the saw and operate it safely. This OEM front handle is manufactured by Poulan, a leader in chainsaws and components. The handle can be used with more than 50 of the available gas-powered chainsaw models from the brand. This plastic part is sold as an individual unit and hardware is not included with the purchase. A screwdriver will be required to make this replacement. Be sure to disengage the engine and allow the chainsaw to cool before performing any repairs. Owners should also be sure to wear gloves when performing equipment repairs, even if not working directly with engine components.

This part can be used to replace a deteriorating or leaking oil pick-up in chainsaws. An oil pick-up is essential for a smooth-running piece of equipment, as it supplies oil to the engine. Over time, oil pick-ups can become worn, which can cause leaks and prevent the engine from receiving the necessary supply of oil to operate properly. This part is manufactured from high-quality, durable plastic and non-corrosive metal. This assembly pick-up oil tank is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement assembly pick-up oil tank fits various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

Chainsaws generate a great deal of heat and friction, but the oil pump systems that keep the situation under control. They do this through the use of chainsaw bar oil poured into a reservoir. It remains in the reservoir until the throttle is engaged which then cues the pump to spray oil out of a port and smear it on the bar and chain to reduce friction and heat. The use of the oil pump is crucial, and this OEM oil pump assembly is a full replacement for times when a chainsaw is not getting adequate oil on the bar. It works with Poulan, Craftsman, Poulan Pro, and others. This project requires only wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.