Parts for Kitchenaid 5KSM150PSZOB5: Color Variation Parts

This housing is the outer cabinet component that protects and supports internal appliance parts, keeping wiring and assemblies secure for reliable operation. It restores proper fit and helps prevent loose components or rattling. What it does:

• Protects internal components and wiring from damage and debris
• Provides structural support and correct alignment for mounted parts
• Helps reduce noise from loose or damaged internal assemblies
• Can cause fit, sealing, or operational issues if cracked or distorted

• Disconnect power before servicing to avoid electric shock.
• Handle carefully; edges may be sharp and fasteners may be under tension.
• Basic hand tools typically required; follow the appliance service manual for disassembly order.
• Replace any damaged fasteners or gaskets to ensure proper fit and sealing.

This housing is the main outer cabinet section that supports internal components and helps direct airflow and protect the appliance. Replacing a damaged housing restores proper fit, reduces noise from loose panels, and prevents debris entry. What it does:

• Provides structural support for internal parts and mounting points
• Protects internal components from dust, moisture, and physical damage
• Helps channel airflow for proper operation and venting
• Reduces rattles and vibration caused by cracked or warped panels
• Prevents sharp edges and gaps that can catch clothing or debris

• Disconnect power before beginning any repair to avoid shock or injury
• Basic hand tools are typically required; follow the service manual for panel removal and reassembly
• Handle sharp edges carefully and wear gloves to protect your hands

This outer housing replaces a damaged or worn cabinet shell to restore the appliance's exterior support and protection. It keeps internal components secure and helps maintain proper alignment and operation. What it does:

• Protects internal components from dust, moisture, and physical damage
• Provides structural support for mounted parts and controls
• Restores proper fit and alignment of panels and doors to reduce rattling or vibration
• Helps maintain the appliance's finished appearance

• Disconnect power (and gas, if applicable) before starting any repair
• Handle edges carefully; housing can have sharp metal parts
• Basic hand tools are typically required; refer to your service guide for disassembly steps

This band trim is a cosmetic finishing piece that covers and protects the visible edge of the appliance door or cabinet for a clean, factory look. It refreshes appearance and helps keep dirt and moisture out of the seam. What it does:

• Covers and finishes the exposed edge of a door or cabinet for a uniform appearance
• Helps reduce dirt and grime buildup along the seam between panels
• Restores a worn, scratched, or missing trim to improve overall appliance appearance
• Works with existing door/cabinet mounting points to sit flush with surrounding surfaces

• Disconnect power to the appliance before starting repairs and work on a cool, dry surface
• Remove any clips or fasteners holding the old trim; save reusable hardware
• Align the new trim with the edge and press or secure into place using the original mounting points
• Replace them with OEM-specified hardware

Color: Onyx black

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

This planetary gear assembly drives the washer's agitator/spin mechanism to transfer motor motion into drum movement, restoring smooth agitation and spin action. Designed to fit as the washer's internal gearing component for reliable operation. What it does:

• Converts motor rotation into the agitator/drum motion for effective washing and spinning
• Replaces worn or damaged gears that can cause noisy operation or grinding sounds
• Helps correct slow, intermittent, or no-agitation and no-spin symptoms when gearbox failure is present
• Works as the internal gearset that mates with the transmission/agitator components

• One planetary gear assembly

• Disconnect power and water before beginning any repair
• Requires partial disassembly of the washer cabinet and access to the transmission/agitator area
• Inspect related parts (agitator, drive coupling, transmission) for wear and replace as needed

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

This grille control surface assembly provides the finished front trim for the appliance control area and restores a clean, secure fit and appearance. It replaces a cracked, damaged or loose control-area grille to improve panel alignment and aesthetics. What it does

• Covers and protects the appliance control area while providing the finished exterior appearance
• Restores proper fit and alignment when the original grille is cracked, bent, or broken
• Helps keep moisture and debris away from underlying controls and wiring
• Matches Onyx black finish for a consistent look with the rest of the appliance

• Disconnect power to the appliance before beginning any repair
• Basic hand tools (screwdriver, possibly trim tool) are typically required for removal and reattachment
• Align tabs and screw holes carefully to avoid cracking the trim during installation
• Replace damaged internal fasteners or mounting clips to ensure a secure fit

This pedestle is the replacement agitator post that supports and centers the washer agitator, restoring proper agitation and load stability for top-load washers. It's a direct-fit part used during agitator assembly repairs. What it does:

• Centers and secures the agitator on the transmission shaft for effective wash action
• Helps transmit agitation motion from the transmission to the agitator
• Commonly replaced when the agitator wobbles, slips, or does not rotate properly
• Restores stable operation without requiring a full agitator or transmission replacement

• One pedestle (agitator post) as shown

• Disconnect power to the washer before beginning any repair
• Remove agitator per manufacturer instructions to access and replace the pedestle
• Use appropriate hand tools; keep fasteners organized for reassembly