Parts for Kitchenaid 7KSM150PSZER5: Color Variation Parts

This housing is the main outer cabinet section that supports internal components and helps direct airflow and protect the appliance. Replacing a damaged housing restores proper fit, reduces noise from loose panels, and prevents debris entry. What it does:

• Provides structural support for internal parts and mounting points
• Protects internal components from dust, moisture, and physical damage
• Helps channel airflow for proper operation and venting
• Reduces rattles and vibration caused by cracked or warped panels
• Prevents sharp edges and gaps that can catch clothing or debris

• Disconnect power before beginning any repair to avoid shock or injury
• Basic hand tools are typically required; follow the service manual for panel removal and reassembly
• Handle sharp edges carefully and wear gloves to protect your hands

This housing is the replacement cabinet housing that supports and protects internal appliance components, restoring proper fit and appearance. It helps keep internal parts secure and maintains correct panel alignment for safe operation. What it does:

• Provides a rigid mounting surface for controls, assemblies and wiring
• Protects internal components from dust, moisture and impact
• Maintains panel alignment to reduce vibration and rattling
• Restores correct clearance and fit when an outer cabinet is cracked or warped

• Disconnect power and water before beginning any repair
• Basic hand tools required; mounting screws or clips must be reused
• Handle edges carefully to avoid cuts; wear gloves and eye protection
• Verify fit and orientation with parts diagram before final assembly

This band trim is a cosmetic finishing piece that covers and protects the visible edge of the appliance door or cabinet for a clean, factory look. It refreshes appearance and helps keep dirt and moisture out of the seam. What it does:

• Covers and finishes the exposed edge of a door or cabinet for a uniform appearance
• Helps reduce dirt and grime buildup along the seam between panels
• Restores a worn, scratched, or missing trim to improve overall appliance appearance
• Works with existing door/cabinet mounting points to sit flush with surrounding surfaces

• Disconnect power to the appliance before starting repairs and work on a cool, dry surface
• Remove any clips or fasteners holding the old trim; save reusable hardware
• Align the new trim with the edge and press or secure into place using the original mounting points
• Replace them with OEM-specified hardware

Color: Onyx black

A replacement trim panel that restores the appliance's exterior finish and protects internal components from dust and debris. Helps maintain a clean look and keeps internal parts shielded after repair. What it does

• Acts as the exterior trim/cover over the appliance opening, preventing debris and lint from entering internal areas
• Protects switches, controls and internal wiring from accidental contact and damage
• Restores proper fit and finish when the original cover is cracked, warped or missing
• Stops rattling or gaps caused by a broken or loose cover

• Only install with power disconnected to avoid electrical shock
• Requires removal of adjacent panels or fasteners for access; use appropriate hand tools
• Handle carefully to avoid scratching the finish; align tabs and fasteners before tightening
• If fasteners or clips are damaged, replace them to ensure secure fit

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

Color: White

This planetary gear assembly drives the washer's agitator/spin mechanism to transfer motor motion into drum movement, restoring smooth agitation and spin action. Designed to fit as the washer's internal gearing component for reliable operation. What it does:

• Converts motor rotation into the agitator/drum motion for effective washing and spinning
• Replaces worn or damaged gears that can cause noisy operation or grinding sounds
• Helps correct slow, intermittent, or no-agitation and no-spin symptoms when gearbox failure is present
• Works as the internal gearset that mates with the transmission/agitator components

• One planetary gear assembly

• Disconnect power and water before beginning any repair
• Requires partial disassembly of the washer cabinet and access to the transmission/agitator area
• Inspect related parts (agitator, drive coupling, transmission) for wear and replace as needed

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

Color: White

This gearcase is the washer transmission assembly that transfers motor power to the agitator and tub, restoring proper agitation and wash action. It replaces worn internal gears to help your washer clean clothes effectively. What it does:

• Converts motor rotation into the oscillating motion needed for agitation and to drive the wash basket
• Replaces stripped, noisy, or slipping gears that cause weak or no agitation
• Stops grinding, knocking, or irregular movement coming from the transmission area
• Restores proper agitation speed and torque for normal wash cycles

• Disconnect power and water supply before starting any repair
• Drain remaining water and remove the washer cabinet or access panel per the service manual
• Follow OEM disassembly steps for the transmission/gearcase; some models require removing the tub or drive components
• If internal seals, bearings, or the motor coupling are damaged, replace them per OEM recommendations

This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does

• Transfers motor rotation to the agitator and spin basket for wash and spin cycles
• Worn or damaged gear teeth can cause no agitation or no spin
• Damaged gearcase may produce loud grinding, clunking, or unusual noises during operation
• Failure can cause intermittent drive or loss of drive in one or both cycles

• Disconnect power and water before starting any repair to prevent shock or flooding
• Drain the washer and secure the tub/agitator before removing components
• May require removing the cabinet or access panels and supporting the drum during service

This grille control surface assembly provides the finished front trim for the appliance control area and restores a clean, secure fit and appearance. It replaces a cracked, damaged or loose control-area grille to improve panel alignment and aesthetics. What it does

• Covers and protects the appliance control area while providing the finished exterior appearance
• Restores proper fit and alignment when the original grille is cracked, bent, or broken
• Helps keep moisture and debris away from underlying controls and wiring
• Matches Onyx black finish for a consistent look with the rest of the appliance

• Disconnect power to the appliance before beginning any repair
• Basic hand tools (screwdriver, possibly trim tool) are typically required for removal and reattachment
• Align tabs and screw holes carefully to avoid cracking the trim during installation
• Replace damaged internal fasteners or mounting clips to ensure a secure fit

This pedestal feet assembly provides the lower support and leveling for a laundry pedestal, helping keep the pedestal stable and aligned beneath the washer or dryer. Designed to restore proper support and reduce rocking. What it does:

• Replaces damaged or worn pedestal feet that cause rocking, uneven height, or instability
• Provides adjustable support to help level the pedestal on uneven floors
• Protects floors by maintaining proper pedestal alignment and preventing scraping
• Restores safe, secure support for appliances installed on the pedestal

• Follow the appliance and pedestal manufacturer instructions; have a second person or proper support to prevent tip-over when removing or installing the pedestal
• Ensure the appliance is powered off and disconnected from utilities if appliance removal or repositioning is required
• Use basic hand tools; confirm all fasteners are tightened securely after installation

This pedestle is the replacement agitator post that supports and centers the washer agitator, restoring proper agitation and load stability for top-load washers. It's a direct-fit part used during agitator assembly repairs. What it does:

• Centers and secures the agitator on the transmission shaft for effective wash action
• Helps transmit agitation motion from the transmission to the agitator
• Commonly replaced when the agitator wobbles, slips, or does not rotate properly
• Restores stable operation without requiring a full agitator or transmission replacement

• One pedestle (agitator post) as shown

• Disconnect power to the washer before beginning any repair
• Remove agitator per manufacturer instructions to access and replace the pedestle
• Use appropriate hand tools; keep fasteners organized for reassembly