Parts for Kitchenaid KSM150QXPT5: Color Variation Parts

This housing is the replacement cabinet housing that supports and protects internal appliance components, restoring proper fit and appearance. It helps keep internal parts secure and maintains correct panel alignment for safe operation. What it does:

• Provides a rigid mounting surface for controls, assemblies and wiring
• Protects internal components from dust, moisture and impact
• Maintains panel alignment to reduce vibration and rattling
• Restores correct clearance and fit when an outer cabinet is cracked or warped

• Disconnect power and water before beginning any repair
• Basic hand tools required; mounting screws or clips must be reused
• Handle edges carefully to avoid cuts; wear gloves and eye protection
• Verify fit and orientation with parts diagram before final assembly

This housing is the replacement cabinet component that helps protect internal dryer components and maintain proper airflow and alignment. Replacing a damaged housing restores panel fit and helps prevent debris from reaching internal parts. What it does:

• Forms the external or internal cabinet surface that supports and protects internal components
• Helps maintain proper airflow and component alignment for normal operation
• Commonly replaced when cracked, warped, or broken from impact or wear
• Can reduce rattles, gaps, and debris intrusion when installed correctly

• Refer to your model's service manual for disassembly and reassembly instructions
• Disconnect power (and gas, if applicable) before starting any repair
• Handle edges carefully; wear gloves to avoid cuts and protect finishes
• Compare the replacement to the original part for fit before final installation

This replacement housing provides the structural enclosure that protects and supports internal appliance components, restoring proper alignment and helping prevent leaks or debris entry. Use it when the original housing is cracked, broken, or misshapen. What it does:

• Encloses and supports motors, pumps, or gear assemblies to keep components aligned and secure
• Protects internal parts from dust, water spray, and foreign objects
• Helps maintain proper airflow or water routing where applicable
• Reduces vibration and noise caused by loose or damaged housing
• Common symptom indicators: visible cracks or broken tabs, unusual vibration or noise, misaligned panels, or leaks near the housing area

• One replacement housing

• Disconnect power (and water if applicable) before starting any repair
• Handle housing carefully to avoid breaking mounting tabs or clips during installation
• Typical install requires basic hand tools; follow the appliance service manual for proper steps and torque specs

This housing is a direct-fit replacement housing piece that restores the appliance's exterior support and alignment. It helps maintain proper component positioning and prevents gaps or interference with adjacent panels. What it does:

• Provides structural support for front and/or control-area components
• Keeps internal parts aligned to prevent rubbing or noise
• Restores correct gap and seal between panels for safe operation
• Helps eliminate vibration-related movement and wear

• One housing

• Verify power is disconnected and appliance is fully isolated before starting
• Handle edges carefully; wear gloves to avoid sharp sheet-metal contact
• Use OEM fasteners and follow manufacturer torque guidance where specified

This housing is the outer cabinet piece that supports and protects internal components, restoring structural integrity and alignment for safe, quiet operation. It's the main exterior enclosure where internal parts mount. What it does:

• Replaces a cracked, dented or corroded outer cabinet that lets components sit out of alignment
• Helps stop rattling, vibration or scraping caused by a warped or broken housing
• Restores proper mounting points for internal assemblies and fasteners
• Protects internal wiring and components from debris and moisture

• One outer housing

• Disconnect power before starting any service; follow all safety guidelines
• Basic hand tools required; some panels or components may need to be removed first
• Inspect adjacent mounting hardware and gaskets and replace if worn for best fit

This main cabinet housing provides the structural enclosure that supports and protects internal components, restoring the appliance's original fit and finish. It helps keep parts aligned and shields circuitry and mechanisms from damage. What it does:

• Replaces a damaged or cracked main housing to restore structural integrity and proper component alignment
• Helps reduce vibration and noise caused by loose or broken enclosure parts
• Protects internal wiring, controls, and mechanical components from moisture and debris
• Restores correct mounting points for panels, latches, and internal assemblies

• One main housing

• Disconnect power and, if applicable, gas and water supplies before starting any repair
• Basic hand tools are typically required; some panels or components may need to be removed for access
• Follow OEM service instructions for proper alignment and fastener torque to ensure safe operation

This housing is the outer case panel that protects and supports internal components, restoring proper fit and appearance to the appliance. It provides structural support and shields wiring and mechanisms from dirt and damage. What it does:

• Replaces a cracked, warped or damaged outer housing to restore proper alignment and enclosure
• Keeps internal components protected from dust, moisture and impact
• Helps reduce rattling or vibration caused by a loose or broken housing
• Restores the appliance's exterior fit and finish for safe operation

• One housing

• Disconnect power (and water, if applicable) before starting any repair
• Remove trim and access panels as needed; retain fasteners for reassembly
• Handle edges carefully to avoid cuts; use proper tools and support the housing during removal/installation

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Restores the appliance's exterior finish after damage or removal
• Helps reduce rattles or vibration caused by loose or broken panels
• Provides a secure mounting surface for adjacent panels and controls

• Disconnect power (and water if applicable) before beginning service
• Use proper hand tools; avoid overtightening fasteners to prevent cracking
• Handle edges carefully to avoid cuts and to prevent cosmetic damage
• Refer to your model's service manual or parts diagram for correct placement and fastener locations

Color: Onyx black

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

A factory-matched Almond crème touch-up paint bottle to restore small chips, scratches, and worn spots on Almond-finish appliances. Helps blend blemishes into surrounding finish for a cleaner, more consistent look. What it does:

• Provides color-matched coverage for small surface chips and scratches on Almond-finish appliances
• Restores appearance without replacing large panels or trim
• Helps hide everyday wear and minor cosmetic damage
• Dries to a durable finish that blends with factory color

• One (1) bottle of Almond crème touch-up paint

• Shake well before use and test on an inconspicuous area first
• Clean and dry the surface thoroughly; remove loose paint and grease
• Apply sparingly in thin coats, allowing recommended drying time between coats
• Use in a well-ventilated area and follow all safety label instructions; wear gloves and eye protection

This planetary gear assembly drives the washer's agitator/spin mechanism to transfer motor motion into drum movement, restoring smooth agitation and spin action. Designed to fit as the washer's internal gearing component for reliable operation. What it does:

• Converts motor rotation into the agitator/drum motion for effective washing and spinning
• Replaces worn or damaged gears that can cause noisy operation or grinding sounds
• Helps correct slow, intermittent, or no-agitation and no-spin symptoms when gearbox failure is present
• Works as the internal gearset that mates with the transmission/agitator components

• One planetary gear assembly

• Disconnect power and water before beginning any repair
• Requires partial disassembly of the washer cabinet and access to the transmission/agitator area
• Inspect related parts (agitator, drive coupling, transmission) for wear and replace as needed

Color: Almond creme

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

This grille control surface assembly provides the finished front trim for the appliance control area and restores a clean, secure fit and appearance. It replaces a cracked, damaged or loose control-area grille to improve panel alignment and aesthetics. What it does

• Covers and protects the appliance control area while providing the finished exterior appearance
• Restores proper fit and alignment when the original grille is cracked, bent, or broken
• Helps keep moisture and debris away from underlying controls and wiring
• Matches Onyx black finish for a consistent look with the rest of the appliance

• Disconnect power to the appliance before beginning any repair
• Basic hand tools (screwdriver, possibly trim tool) are typically required for removal and reattachment
• Align tabs and screw holes carefully to avoid cracking the trim during installation
• Replace damaged internal fasteners or mounting clips to ensure a secure fit

This Almond Creme color finish panel restores the original look of your appliance where the finish is worn, scratched, or mismatched. It provides a factory-style color match to keep the exterior appearance consistent. What it does:

• Replaces damaged or discolored finish panels to restore appliance appearance
• Covers scratches, chips, and worn paint on the affected area
• Matches the Almond Creme factory color to maintain a cohesive look
• Helps maintain resale value and overall visual condition

• Disconnect power to the appliance before beginning any work
• Handle panel carefully to avoid scratching the finish during installation
• Align tabs and mounting points, then secure with existing fasteners as required

This pedestal raises the appliance to a more comfortable height while providing a stable base and integrated storage space. It improves accessibility and makes loading and unloading easier by reducing bending. What it does:

• Supports and elevates the appliance for easier access to controls and drum/opening
• Provides a built-in storage area for laundry or accessory items
• Restores a level, secure mounting surface when the original pedestal is damaged or missing
• Helps reduce wear by keeping the appliance properly aligned and slightly elevated from the floor

• Disconnect power (and water for washer units) before starting any work
• Use two people or proper lifting equipment to position the appliance onto the pedestal
• Align mounting points and secure per manufacturer's fasteners; do not overtighten
• If the pedestal contains electrical connections (e.g., for drawer lights), follow OEM wiring instructions