Parts for Kitchenaid KSM154GBQ4MH5: Color Variation Parts

This housing is the outer cabinet component that protects and supports internal appliance parts, keeping wiring and assemblies secure for reliable operation. It restores proper fit and helps prevent loose components or rattling. What it does:

• Protects internal components and wiring from damage and debris
• Provides structural support and correct alignment for mounted parts
• Helps reduce noise from loose or damaged internal assemblies
• Can cause fit, sealing, or operational issues if cracked or distorted

• Disconnect power before servicing to avoid electric shock.
• Handle carefully; edges may be sharp and fasteners may be under tension.
• Basic hand tools typically required; follow the appliance service manual for disassembly order.
• Replace any damaged fasteners or gaskets to ensure proper fit and sealing.

This housing is the replacement cabinet housing that supports and protects internal appliance components, restoring proper fit and appearance. It helps keep internal parts secure and maintains correct panel alignment for safe operation. What it does:

• Provides a rigid mounting surface for controls, assemblies and wiring
• Protects internal components from dust, moisture and impact
• Maintains panel alignment to reduce vibration and rattling
• Restores correct clearance and fit when an outer cabinet is cracked or warped

• Disconnect power and water before beginning any repair
• Basic hand tools required; mounting screws or clips must be reused
• Handle edges carefully to avoid cuts; wear gloves and eye protection
• Verify fit and orientation with parts diagram before final assembly

This housing is the replacement cabinet component that helps protect internal dryer components and maintain proper airflow and alignment. Replacing a damaged housing restores panel fit and helps prevent debris from reaching internal parts. What it does:

• Forms the external or internal cabinet surface that supports and protects internal components
• Helps maintain proper airflow and component alignment for normal operation
• Commonly replaced when cracked, warped, or broken from impact or wear
• Can reduce rattles, gaps, and debris intrusion when installed correctly

• Refer to your model's service manual for disassembly and reassembly instructions
• Disconnect power (and gas, if applicable) before starting any repair
• Handle edges carefully; wear gloves to avoid cuts and protect finishes
• Compare the replacement to the original part for fit before final installation

This housing is the outer casing that supports and protects the washer's internal tub and components, restoring structural stability and helping contain water and vibration for reliable operation. What it does:

• Supports the inner tub and motor assembly to maintain proper alignment during cycles
• Protects internal components from debris and water exposure
• Helps reduce vibration and rattling caused by a damaged or cracked cabinet
• Can stop or reduce leaks when a compromised housing allows water to escape

• One housing

• High-level replacement; access requires disassembling the washer cabinet — follow the OEM service manual
• Disconnect power and water supply before starting work to avoid shock or flooding
• Use proper tools and fasteners; inspect adjacent seals and mounts and replace if worn

This housing is the main cabinet housing that protects and supports the appliance's internal components, helping keep parts secure and aligned for reliable operation. Replacing a damaged housing restores proper fit and protection. What it does:

• Encloses internal components to protect them from impact, dust, and moisture
• Provides mounting surface and structural support for controls and assemblies
• Helps reduce vibration and rattling caused by loose or cracked panels
• Prevents component contact that can cause noise or wear

• One housing

• Disconnect power (and gas supply if applicable) before starting any repair
• Handle carefully; edges may be sharp and surrounding parts can be fragile
• Removal may require partial disassembly of exterior panels or brackets—refer to the OEM service manual
• If fasteners or clips are damaged, replace them to ensure a secure fit

This outer housing replaces a damaged or worn cabinet shell to restore the appliance's exterior support and protection. It keeps internal components secure and helps maintain proper alignment and operation. What it does:

• Protects internal components from dust, moisture, and physical damage
• Provides structural support for mounted parts and controls
• Restores proper fit and alignment of panels and doors to reduce rattling or vibration
• Helps maintain the appliance's finished appearance

• Disconnect power (and gas, if applicable) before starting any repair
• Handle edges carefully; housing can have sharp metal parts
• Basic hand tools are typically required; refer to your service guide for disassembly steps

This housing is the outer cabinet piece that supports and protects internal components, restoring structural integrity and alignment for safe, quiet operation. It's the main exterior enclosure where internal parts mount. What it does:

• Replaces a cracked, dented or corroded outer cabinet that lets components sit out of alignment
• Helps stop rattling, vibration or scraping caused by a warped or broken housing
• Restores proper mounting points for internal assemblies and fasteners
• Protects internal wiring and components from debris and moisture

• One outer housing

• Disconnect power before starting any service; follow all safety guidelines
• Basic hand tools required; some panels or components may need to be removed first
• Inspect adjacent mounting hardware and gaskets and replace if worn for best fit

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Restores the appliance's exterior finish after damage or removal
• Helps reduce rattles or vibration caused by loose or broken panels
• Provides a secure mounting surface for adjacent panels and controls

• Disconnect power (and water if applicable) before beginning service
• Use proper hand tools; avoid overtightening fasteners to prevent cracking
• Handle edges carefully to avoid cuts and to prevent cosmetic damage
• Refer to your model's service manual or parts diagram for correct placement and fastener locations

Imperial gray finish bowl for stand mixers. Replace cracked, chipped, or discolored mixing bowls. Attaches to mixer base for ingredient preparation.

Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.

Replacement trim panel cover for stand mixers. Restores exterior finish and protects internal components. Replaces cracked, broken, or missing panels.

This planetary gear assembly transfers motor torque through the transmission to drive the agitator/drum, restoring proper mechanical motion. Replaces a worn or damaged planetary to reduce grinding, slipping, or no-agitation symptoms and improve drivetrain reliability. What it does:

• Meshes with the transmission sun gear to convert motor rotation into the correct output for the agitator/drum
• Restores normal agitation/rotation when original gears are worn, broken, or skipping
• Helps eliminate grinding, clunking, or intermittent movement caused by damaged internal gears
• Works as a direct-fit replacement when the original planetary gear has failed

• Refer to the appliance's service manual or exploded parts diagram for correct disassembly and reassembly steps
• Disconnect power and water (if applicable) before beginning repairs to avoid shock or injury
• Inspect surrounding gears, bearings, and seals; replace any additional worn components to prevent premature failure
• Use appropriate tools and torque specs;

Replace the gray housing cover on your stand mixer. This cosmetic shell protects internal components and completes the exterior appearance when damaged.

If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.

Mixer not turning or making grinding noises? This gearcase assembly houses the planetary gears that drive your attachments. Moderate DIY repair.

Gray housing cover for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores the appearance of your mixer's body shell.

Decorative grille that covers the control area on your stand mixer. Replace if cracked, damaged, or loose to restore a clean, finished appearance.