Parts for Kenmore 110.31633611 (11031633611, 110 31633611): Console And Lid Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This rear panel replaces the damaged or corroded back cabinet panel to protect internal components and restore the appliance's outer enclosure. It provides a neat, secure back cover and helps maintain proper airflow and safety. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Restores structural support and keeps wiring and parts enclosed
• Prevents drafts and helps maintain proper airflow paths
• Stops rattling or vibration caused by bent or missing back panels
• Useful when the existing panel is dented, rusted or has service access damage

• One rear cabinet panel

• Disconnect power (and water if applicable) before starting any repair
• Handle edges carefully; wear gloves to avoid cuts from sheet metal
• Remove mounting screws and retainers, align panel, and reinstall fasteners securely

The Washing Machine Water Inlet Valve is an OEM part for Whirlpool brand washing machines. It regulates water flow into the washer tub during fill cycles and shuts off the supply automatically when the proper water level is reached.

Causes of a bad inlet valve include mineral buildup inside the valve filter restricting flow over time, or mechanical failures of internal plastic parts like diaphragms and seals due to usage stress.

Symptoms of a bad water inlet valve include:

• Slow or inconsistent filling during wash cycles  
• Water failing to shut off fully after the designated fill level  
• An inability to properly meter incoming water supply amounts
• Water leaks noticed beneath or around the valve area

This OEM replacement valve ensures precise water flow regulation. Compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models.

This is a replacement washer control board assembly designed for top-loading machines. It includes both the manual controls for the washer, and the electronic control board that monitors and manages washing cycles and functions. Users can choose the wash cycle, water temperature, and more. Over time, button contacts on a control board can wear out. Signs that the control board assembly needs to be replaced include erratic operation, or if the washer is not operational at all. To replace the board assembly, first unplug the washer. Next, locate the mounting screws behind the assembly and remove them. Disconnect the wiring and remove the old board assembly. Install the new one in the reverse order. Always wear gloves to protect the hands.This OEM part is manufactured by Whirlpool. It's sold individually and will fit Whirlpool and Kenmore washing machines.

This 8-18 x 5/8-inch screw secures appliance panels, brackets, and covers. Replacing a missing or stripped fastener restores a tight fit and helps prevent vibration or loosening where this exact size is specified.

• Fastens sheet-metal or plastic components where a #8-18 x 5/8 screw is called for
• Helps maintain alignment and reduce rattling or vibration
• Replaces stripped, corroded, or missing screws of the same size
• Common symptoms: loose panels, gaps/poor fit, rattling noises, or visible missing hardware

• Disconnect power and shut off gas/water (as applicable) before service
• Match thread and length to the original; replace screws one at a time to keep parts aligned
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• If the receiving threads are damaged, additional repair (clip, insert, or new nut) may be needed

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Size: 10-16 x 5/8 inch.

This replacement screw fastens appliance components securely in place. Use it to replace missing, stripped, or corroded hardware so panels, brackets, and covers stay aligned and rattle-free.

• Secures parts such as panels, brackets, covers, or internal assemblies
• Restores alignment and helps eliminate vibration or rattling from loose hardware
• Replaces lost, rusted, or damaged screws during service
• Maintains safe, stable operation by keeping components tight

• Disconnect power before service; if applicable, also shut off water and/or gas
• Start threads by hand to avoid cross-threading; tighten snugly without over-torquing
• Use the correct driver bit to prevent stripping the head

This screw is a genuine replacement fastener used to secure appliance panels and components for a reliable fit. It restores proper fastening where original screws are missing, stripped, or damaged. What it does:

• Fastens panels, trim, brackets or small components to keep parts aligned and secure
• Replaces missing or damaged screws that can cause loose panels or rattling
• Restores proper clamping force to prevent movement and wear on adjacent parts
• Matches OEM function and fit when the correct part number is used

• Disconnect power and water before servicing the appliance
• Use the correct driver to engage the head cleanly and avoid stripping
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement nut secures appliance parts and hardware to keep assemblies stable and prevent loose connections. It's a simple, direct replacement for worn or missing fastening hardware to restore proper fit and reduce vibration. What it does:

• Fastens mounting studs, brackets or panels to hold components in place
• Restores secure mechanical connections that can loosen over time
• Helps eliminate rattling, vibration and misaligned panels caused by missing or stripped hardware
• Provides a straightforward, durable replacement for corroded or damaged nuts

• Disconnect power to the appliance before beginning any repair
• Use the correct-size wrench or socket; ensure threads engage smoothly before tightening
• Tighten until snug—avoid overtightening that can strip threads or damage components
• Inspect mating threads and replace any damaged studs or hardware for a reliable repair

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This is a washing machine control panel. It is an essential internal component of the appliance. The main responsibility of the control panel assembly is to ensure all washer components are operating correctly. It also sets the timing for washing machine cycles and controls items like the drain pump and drive motor.The control panel assembly can malfunction or become damaged and cause the washing machine to stop operating properly. The washer may not fill or fail to drain, spin or start up. If this component is causing these problems, it should be replaced. The first step is to unplug the washing machine from the wall. A pair of work gloves can also be useful for protecting the hands. Take the control knob off the panel remove the screws holding the back panel on the part. Remove the board while taking note of where the wires go. Disconnect them and remove the control panel. Install the new component in its place.The control panel assembly is an authentic OEM replacement component that is directly sourced from the manufacturer. It's sold as a single part and is compatible with washing machines by Kenmore.

Color: White

The Upper Lid Assembly is an OEM part for Whirlpool washing machines. It covers the opening at the top of the washer tub during operation to safely circulate water. The lid assembly contains seals that ensure a tight seal when closed to prevent leaks.

Causes of a bad lid assembly can include wear and tear from repeated use, damage from excessive detergent residue buildup, warping from overheating, or from stress caused by an imbalanced load.

Symptoms of a bad lid assembly include:

• Water leaks from around the lid seal or closing mechanism
• The lid not sealing properly, causing abnormal noises or movement during the cycle
• Cracks, scratches, or warping of the plastic that compromise the lid's integrity

Difficulty opening or closing the lid
This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This genuine replacement mounting screw secures appliance panels and components so assemblies stay aligned and stable during normal use. Use it to replace lost or damaged fasteners and restore safe, rattle-free operation. What it does

• Secures panels, brackets, and small components to the appliance frame
• Prevents loose parts, vibration noise, and misalignment of assemblies
• Restores proper fit where a missing or stripped screw caused gaps or rattles
• Matches original fastening point size and head style for correct engagement

• Use the matching driver bit and moderate torque; overtightening can strip threads or damage parts
• Replace any stripped or damaged mating hardware; do not force a screw into a damaged hole
• Disconnect power or follow appliance-specific safety steps before working near electrical components

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.