Parts for Kitchenaid KGRS303BSS1: Cooktop Parts

Color: Black. Kit includes five burner caps. For the burner cap kit in grey use part number WPW10183372.

This factory screw secures panels, brackets, or trim within your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces vibration and rattles, and helps keep components aligned for reliable, long-term performance.

• Fastens panels, brackets, or trim to the appliance cabinet/frame
• Replaces damaged, rusted, or missing hardware
• Helps eliminate vibration noises, gaps, and loose-fitting parts
• Supports proper alignment of adjoining components

• Disconnect power; turn off gas/water supplies where applicable.
• Match to the original screw from your model's parts diagram before installation.
• Start threads by hand to avoid cross-threading; use the correct driver bit for the head.
• Tighten snugly—do not overtighten to prevent stripping threads or cracking plastic bosses.

The Surface Burner Base is an OEM part for Whirlpool ranges and cooktops. This component is a critical part of the stove's burner assembly, housing the gas outlet and providing a stable platform for the burner cap and flame spreader. It is specifically designed to handle the rigors of daily cooking, ensuring an even and controlled flame that enhances your cooking precision.

Symptoms of a failing Surface Burner Base include:

• Uneven flames or poor heat distribution
• Difficulty in lighting the burner
• Gas leaks detected around the burner area
• Visible signs of corrosion or damage to the base

Common causes for burner base issues can include continual exposure to high temperatures, spills that lead to clogging or corrosion, and normal wear and tear. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Surface Burner and Electrode is an OEM part for Whirlpool cooktops and ranges. This component is essential for igniting the gas burner, ensuring efficient and reliable cooking performance. The burner provides a stable flame for cooking, while the electrode generates the spark needed to ignite the gas. Includes the igniter. The compatible screw is part number WP3368921 / AP6008125

You should replace the surface burner and electrode if they become faulty. Causes of a bad surface burner and electrode can include regular wear and tear, food residue buildup, or damage from high heat. A malfunctioning burner or electrode can lead to ignition issues and inefficient cooking.

Symptoms of a bad surface burner and electrode include:

• The burner not igniting or taking multiple attempts to light
• Weak or inconsistent flames
• Clicking sound without ignition when trying to light the burner
• Uneven cooking or hotspots on cookware

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: Includes ignitor

Color: White

The Cooktop is an OEM part for Whirlpool ranges. As the smooth glass surface where food is cooked, it is subject to damage or wear over time.

Causes of a bad cooktop can include burns or cracks from pans, damage from sharp objects, or scratches and losses of gloss from daily use over the years. Glass surfaces are vulnerable to these types of impacts and abrasions.

Symptoms of a bad cooktop include: 

• Uneven or slow-heating areas 
• Visible cracks, chips, or gouges in the glass
• Cookware that rocks or is unstable to use
• A worn or faded appearance affecting aesthetics

This OEM replacement is also compatible with select kitchen appliances from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and more.

This is a replacement control knob that restores safe, reliable control of your appliance's front panel settings. It gives a secure grip and accurate position feel so you can select cycles, temperatures, or functions with confidence. What it does:

• Replaces a cracked, stripped, or missing control knob so the control shaft can be turned smoothly
• Restores positive detents and readable position alignment for accurate setting selection
• Stops slipping, wobbling, or loose rotation caused by a damaged or worn knob
• Helps prevent damage to the control shaft by providing a properly fitting interface

• Disconnect power (unplug or shut off circuit) before attempting replacement
• Most installations are push-on/snap-fit; firmly pull off the old knob and push the new knob onto the control shaft until seated
• If the knob is secured with a clip or set-screw, retain hardware and reattach exactly as removed
• Do not force the knob; if it does not seat easily, verify shaft type and orientation to avoid damage

The Torx Screw is an OEM replacement part for Whirlpool brand appliances. The Torx Screw is responsible for providing secure and stable connections between different components of washing machines, dryers, dishwashers, and more. These screws are characterized by their star-shaped drive design, which offers better torque transfer and reduces the risk of stripping or cam-out. Sold individually. 7-18 x 3/4"

Causes of a bad Torx screw can include stripping of the screw head, rust or corrosion from prolonged exposure to moisture, or damage from over-tightening or cross-threading. A compromised screw can lead to loose or insecure parts, which can affect the performance and safety of the appliance.

Symptoms of a bad Torx screw include:

• The screw head being stripped and difficult to turn
• Rust or corrosion visible on the screw
• The screw not holding components securely
• Loose or rattling parts within the appliance

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.