Parts for Lg LRE3023ST: Cooktop Parts

The HARNESS, SINGLE is an OEM component specifically designed for LG ranges. It is a custom wiring assembly that electrically connects critical range functions such as ignition, valve operation, and thermostats/sensors. Proper signal transmission through this single integrated harness is essential for safe and effective cooking performance.

Causes of a bad single gas harness can include damaged insulation from abrasion over time or loose connections disrupted by normal range movement. Physical impacts or overheating could also degrade individual harness wires. 

Symptoms of a bad single harness include:

• Inability to ignite burners or light doesn't stay lit 
• Burners failing to turn off automatically  
• Faulty burner temperature control
• Error codes or safety issues triggering range lockouts

Replace yours today with this genuine OEM wiring harness to ensure all range systems communicate reliably. This ensures your LG gas range remains durable and dependable for years to come.

This heater assembly replaces the dryer's heating unit to restore warm air for effective drying. It fits into the dryer's blower/air path and provides the heat source needed to evaporate moisture from clothing. What it does:

• Houses the heating element and directs warm air through the drum
• Restores normal drying temperatures when the original heater fails
• Common symptom: dryer runs but clothes remain damp or take much longer to dry
• Common symptom: reduced or no warm air coming from the dryer

• Disconnect power (and gas supply for gas models) before beginning any repair
• Handle heating elements and terminals carefully to avoid damage
• After installation, test dryer operation and check for proper airflow and secure electrical connections

This glass turntable plate supports food inside the microwave and provides a stable, heat-resistant surface for even cooking. It replaces a cracked, chipped, or missing tray so meals rotate smoothly during use. What it does:

• Provides a flat, heat-safe surface for plates, bowls, and cookware
• Enables the turntable mechanism to rotate food for more even heating
• Replaces damaged or shattered glass that can catch or crack further
• Reduces rattling or scraping caused by a broken or warped tray

• One round glass turntable plate

• Handle with care; glass can break if dropped or hit
• Clean with warm, soapy water and avoid sudden temperature changes
• Ensure the plate is seated properly on the roller ring and drive hub before use
• Disconnect power to the appliance before inspecting internal components

This heater bracket is a metal mounting support that holds the appliance's heater or heating element securely in place, helping maintain proper alignment and reduce movement. Replacing a bent or broken bracket restores stable support for the heater assembly. What it does:

• Secures the heater or heating element to the appliance frame so the element stays aligned and does not contact other components.
• Prevents rattling, shifting, or sagging of the heater assembly that can cause noise or uneven heating.
• Helps maintain safe clearances between the heater and surrounding parts.
• Used when the original bracket is cracked, bent, or missing hardware.

• Disconnect power (and gas, if applicable) before beginning work to avoid electrical shock or gas hazards.
• Handle metal parts carefully — edges may be sharp. Wear gloves and eye protection.
• Match the part number and orientation, secure all fasteners, and ensure the heater is properly aligned before restoring power.

This radiant surface element fits beneath the glass cooktop and delivers direct, even heat to your cookware. Replace a burned-out or damaged burner to restore consistent heating when a smoothtop zone no longer performs correctly.

• Generates radiant heat under the ceramic-glass surface for a surface burner
• Helps resolve no-heat, very slow/uneven heating, or only part of the element glowing
• Restores reliable temperature control when a cooking zone won't respond to settings
• Suitable replacement when burn marks or breaks are visible beneath the glass

• Disconnect power at the breaker and let the cooktop cool completely before servicing
• Lift or remove the glass top to access the element; note and label wire positions
• Handle the element carefully; avoid flexing the coil or disturbing insulation
• Transfer any mounting clips/brackets from the old element if required, then reassemble and test

This Radiant Surface Element is an OEM replacement part for LG electric ranges and cooktops. It is a high-power coil heating unit located below the cooktop surface that provides efficient, customizable heat for various cooking needs.

Causes of failure can be wear and damage to coiled filaments from prolonged heating cycles, cracking of ceramic insulators, or loose wiring connections suffering arcing or resistance over time.

Symptoms of a faulty element include:

• Slow or inadequate heating of cookware even on high settings
• Temperature fluctuations within the heating zone
• Burning or charring of spills and foods on the element itself
• Tripped circuit breakers obstructing range operation

This replacement is also compatible with some Kenmore models

This radiation heater is the element that delivers direct radiant heat for the microwave's grill/browning feature. Replacing a failed heater restores proper grilling performance and helps foods brown and crisp during grill or combination-cook settings. What it does:

• Supplies radiant heat for grill/browning and combo-cook modes
• Typically mounted at the top of the cavity to radiate heat downward
• Common failure symptoms: no heat in grill mode, element does not glow, poor or uneven browning
• Visual clues can include cracks, blistering, or burnt spots on the heater

• 1 radiation heater element

• Disconnect power before servicing; microwaves contain high-voltage components that can retain a charge even when unplugged
• Access may require removing the outer case and interior shroud; beware of sharp metal edges
• Note wire positions before removal; route leads away from hot or moving parts during reassembly
• Verify secure mounts and connections before testing the grill function