Parts for Maytag JDS1750CES0: 02 - Cooktop Parts

Replacement burner cap kit for gas cooktops that restores proper flame shape and protects the burner head from spills and debris, helping burners heat more evenly and reducing ignition issues. What it does:

• Sits over the burner head to shape and stabilize the flame for consistent cooking
• Shields burner ports from spills and food build-up that can clog ports and affect flame
• Replaces cracked, chipped or missing caps that cause uneven heating or noisy flames
• Can help improve ignition reliability when burner ports are clear and caps are seated correctly

• Turn off the gas supply and ensure the cooktop is completely cool before servicing
• Typically installs by lifting off the old cap and placing the replacement into position; do not force parts
• Clean burner head and ports of debris before installing new cap to ensure proper seating and flame

The Range Control Panel is an OEM part for Whirlpool ranges. It houses all of the control buttons, display screen, and associated electronic components that allow users to operate the range features and monitor status. 

Causes of a bad control panel include failure of internal electronic modules, worn buttons and membrane switches, and moisture in the control board. 

Symptoms of a failed control panel include:

• Inoperative burners, oven, or other heating elements 
• Unclear or blank control panel display
• Stuck or non-functional buttons 
• Controls that randomly change programmed settings

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This burner head replaces the damaged or corroded surface burner cap to restore consistent gas flow and stable flames on your cooktop. It fits into the range's burner assembly to help deliver even heat for everyday cooking. What it does:

• Directs gas to produce an even, stable flame for stovetop cooking
• Replaces a warped, cracked, or corroded burner head that causes uneven heating
• Can resolve intermittent or irregular flames and reduced burner performance
• Works with the existing burner base and ignition system to re-establish proper operation

• Turn off the appliance and shut off the gas supply before servicing.
• Remove grates and burner caps to access the head; reassemble in reverse order.
• Use basic hand tools; inspect the burner base and igniter for damage while replacing.

Screws for range anti tip bracket: WP3801F656-51. Includes 2 screws.

This replacement control knob restores a worn or broken factory knob so you can easily and safely set your appliance's functions. It provides a simple push-on fit to make appliance adjustments quick and reliable. What it does

• Replaces a damaged or missing control knob so settings can be selected accurately
• Restores tactile grip and clear pointer alignment for repeatable control
• Helps prevent slipping or accidental changes to selected settings
• Fits the original control shaft for correct operation when installed

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the old knob by pulling straight off the shaft; align the new knob's splines and push on until fully seated
• Verify proper seating and function before returning the appliance to normal use
• If the knob feels loose or won't engage, stop and check shaft type and part number compatibility

This grate kit replaces worn or damaged cooktop grates to restore stable cookware support and safe burner use on compatible gas ranges. It keeps pots and pans steady for safer, more reliable cooking. What it does

• Replaces cracked, warped, or missing grates that cause unstable cookware
• Restores a flat, secure surface so burners heat pots and pans evenly
• Helps prevent direct contact between cookware and burner components
• Reduces rattling or shifting grates that can occur during normal use

• One grate kit as shown

• Turn off burners and let the range cool completely before installing
• Remove old grates and position the new grate pieces so they sit flat and stable
• No modification required; follow the range owner's manual for proper placement
• If you smell gas or notice a burner problem after installation, stop use.

This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.

• Fastens brackets, panels, trim, or components to the appliance chassis
• Helps correct loose or missing hardware after vibration or service
• Replaces stripped, rusted, or broken screws
• Can reduce rattling noises or misaligned parts caused by missing fasteners

• Disconnect power; for gas appliances, also shut off the gas supply
• Support the part being fastened; start threads by hand to avoid cross-threading
• Use the correct driver size; tighten snugly without overtightening
• Replace hardware with the exact part number to ensure proper fit

This replacement griddle sits over your range or cooktop burners to provide a flat, removable cooking surface. Use it to restore a level cooking area when the original is worn, damaged, or missing.

• Creates a flat cooking surface above the burner(s) for items like pancakes and sandwiches
• Helps distribute heat from the burner across the plate for more even contact
• Replace if cracked, warped, chipped, or heavily worn
• Common signs include rocking or poor fit, visible damage, or a degraded cooking surface

• Turn off all burners and allow the cooktop and griddle to cool completely before handling
• Position on the designated grate or locator tabs per your model's orientation
• Follow care and cleaning guidance in your owner's manual

This trim vent replaces a damaged or worn vent grille to restore proper airflow appearance and help direct air where the appliance needs it. It's a direct-replacement exterior trim piece that cleans up the unit's vent opening. What it does:

• Covers and protects the appliance vent opening while providing a finished appearance
• Directs airflow and helps prevent debris from entering the vent area
• Replaces cracked, broken, or faded vent trim that affects appearance or fit
• Helps reduce rattling or loose trim that can occur with damaged vent pieces

• One trim vent (single grille piece)

• Disconnect power to the appliance before beginning any work
• Typically installs with snap-in tabs or a few screws; avoid forcing to prevent breakage
• Inspect surrounding clips or screws and replace if worn for a secure fit

This electronic control board manages and coordinates your appliance's core functions. Replacing a failed board restores proper response to button presses, accurate cycle timing, and reliable power delivery to motors, valves, heaters, and fans.

• Coordinates cycle selection and timing using inputs from sensors and the user interface
• Distributes power through onboard relays to run loads such as motors, pumps, valves, heaters, and fans
• Monitors system feedback and stores/communicates fault codes when faults are detected
• Common failure symptoms: won't start or respond, cycles won't advance, stops mid-cycle, lights/beeps without action, recurring error codes

• Disconnect power at the breaker or unplug the appliance before service; shut off water/gas if applicable
• Use ESD protection and handle the board by the edges; avoid touching components and solder traces
• Photograph wiring and label connectors; transfer any brackets, shields, or jumpers from the old board
• Ensure all connectors are fully seated, then run a diagnostic or test cycle to operation

This electronic display is the user interface for the appliance's control board, showing clock, temperature, timer and status messages so you can monitor and operate the range/oven functions clearly and reliably. What it does:

• Shows oven/range status, temperature, timers and error codes so you can read settings at a glance
• Provides the visual interface for selecting cook modes, timers and clock adjustments
• Works with the appliance control board to relay user inputs and display system feedback
• Commonly replaced when the display is cracked, dim, unreadable or fails to power on

• Use power disconnect procedures: unplug appliance or shut off breaker before servicing
• Handle the display carefully to avoid damage to the lens and ribbon/connectors
• Reconnect all wiring securely; confirm correct seating on the control board before restoring power

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This replacement bezel knob restores the appearance and secure fit of a range or oven control panel. It replaces a cracked, loose, or missing knob bezel to help ensure proper knob seating and a finished look. What it does:

• Centers and secures the control knob on the appliance control panel
• Maintains correct spacing so the knob turns smoothly and seats properly
• Helps prevent debris from entering the knob shaft area
• Commonly replaced for visible cracks, breaks, or when the bezel no longer holds the knob firmly

• One bezel knob

• Disconnect power to the appliance before starting any work
• Typically aligns over the knob shaft and snaps or slides into place; avoid forcing it
• Inspect the knob shaft and surrounding trim for damage and replace if necessary

This insert is a small OEM component designed to fit into a specific location on your appliance to secure, align, or finish an assembly. Replacing a worn, damaged, or missing insert restores proper fit and clean appearance.

• Provides a snug interface or cover within the designated assembly
• Helps prevent looseness, vibration, or gaps in the connected part
• Replaces cracked, worn, or missing insert pieces
• Common symptoms include loose or wobbly parts, misalignment, or a missing cap/cover

• Disconnect power and shut off gas/water before servicing
• Refer to your model's parts diagram to confirm location and orientation
• Use non-marring tools to avoid cosmetic damage
• Seat the insert fully; do not overtighten adjacent fasteners

This Bumper is an OEM part for Whirlpool ranges. Serving as a protective barrier, it cushions and safeguards various parts of the range. Engineered to fit seamlessly, it ensures stability and protection for specific range models.

What causes a bad part:
Continuous use, exposure to heat, or physical impact can lead to wear and tear of the Bumper. Harsh cleaning agents or abrasive materials during maintenance can also contribute to its degradation.

Symptoms for a bad part:

• Loose or detached bumpers
• Visible cracks or damage on the bumper
• Increased vibration or instability in the range

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This anchor tip secures the washer agitator to the transmission shaft so the agitator turns with the washer drive. Replaces a worn or damaged anchor tip to restore proper agitator engagement and reduce slipping. What it does:

• Secures the agitator to the drive shaft so the agitator rotates with the motor
• Helps prevent the agitator from slipping or spinning independently
• Commonly used when the agitator feels loose, makes grinding or clicking noises, or stops agitating
• Simple, low-profile part that works behind the agitator cap

• One anchor tip

• Disconnect power and water before starting any repair
• Remove agitator/agitator cap to access and replace the anchor tip per OEM instructions
• Inspect mating surfaces and replace any additional worn components if engagement remains poor

The Display Wire Harness is an OEM part for Whirlpool ranges. It connects the control panel display to the range’s main control board, allowing for communication between the user interface and the appliance’s electronic system. This harness ensures that the display panel accurately shows information such as temperature settings, timer functions, and error codes.

Causes of a bad display wire harness can include regular wear and tear, electrical issues, or damage from heat exposure or physical impact. When the wire harness fails, it can disrupt the flow of information between the control panel and the main control board, affecting the operation and display functions of the range.

Symptoms of a bad Display Wire Harness include:

• The display panel not lighting up
• Inaccurate or flickering display readings
• Buttons on the control panel not responding
• Error codes appearing on the display

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Keypad Wire Harness is an OEM part for Whirlpool ranges. This component is essential for connecting the keypad to the control board, enabling communication between user inputs and the range's operational functions.

Causes of a bad keypad wire harness can include wear and tear from regular use, exposure to heat and moisture, or physical damage due to mishandling or accidental impact. Electrical issues such as short circuits or frayed wires can also lead to malfunctioning.

Symptoms of a bad keypad wire harness include:

• Unresponsive keypad buttons
• Intermittent or inconsistent range operation
• Error codes related to keypad communication
• The range not powering on or off correctly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.