Craftsman Tiller Parts

This is a replacement condenser for select Tecumseh engines. The condenser is part of the ignition assembly and is required for proper operation of the ignition and optimal engine performance. The condenser is responsible for carrying the current and connecting the terminals. The condenser and ignition coil combine to create the ignition assembly and if one part is not working properly it can affect engine performance. When the ignition is not performing properly, or engine will not start or stay running, there could be a problem with the ignition assembly, and specifically with the condenser. This genuine OEM condenser is made to exact standards and is designed to work with engines in select lawn and garden equipment. The condenser is an electrical part and should always be replaced with gloves and on a cool engine that has been disconnected from power. This durable part is made of metal and wire and sold individually. Other parts of the assembly and hardware will require an additional purchase.

As an ignition coil, this OEM replacement part is tasked with sending voltage to a spark plug whenever the engine is not currently running. It can be used in many tools including snowblowers and lawnmowers. If the ignition coil has malfunctioned or is no longer working, the engine on the lawn and garden equipment will not start. In some cases, a replacement governor arm will also be required.In some cases, when an ignition coil breaks or stops working properly, it will have evidence of cracks, carbon tracking, or burn marks. If visual inspection shows any of those things are present, the ignition coil will need to be replaced. Testing the ignition coil is simple and requires switching it out for a new one to see if the problems stop occurring. A spark tester can also be used to see if the ignition coil has gone bad.This ignition coil is a genuine OEM part sourced directly from the manufacturer. It is compatible with lawnmowers, generators, snowblowers, and tillers manufactured by Briggs & Stratton, Tecumseh, Craftsman, and Toro. It comes as an individual part. An ignition tester can be useful for installation and troubleshooting with this component.

This is a genuine OEM replacement fuel cap sourced directly from the manufacturer. The fuel cap is used on lawn and garden engines that are powered by fuel. It is an integral part of the machine's fuel delivery system. Fuel caps prevent fuel from seeping out of the fuel tank and becoming a safety hazard. The cap's primary function is to keep fuel in the tank and keep water and other contaminants out of the fuel. Everyday use and outdoor elements can cause deterioration of the fuel cap. During scheduled maintenance and refueling of the tank, a visual inspection can quickly show any damage that needs to be addressed. The fuel cap cannot be repaired; it is a one-piece molded-plastic component that must be replaced when necessary. Tools are not required to replace the fuel cap. Work gloves should be worn when working with fuel. Unscrew the broken fuel cap and remove it from the fuel tank. Screw the new filler cap in place. Make sure the threads are lined up and the fit is tight.This fuel cap is sold as an individual unit. It is compatible with fuel tanks on lawn mowers, tillers, generators, and other engines manufactured by Tecumseh, Craftsman, Toro, and Briggs & Stratton.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

This is a breather designed to be used on various types of lawn and garden equipment. The breather is an essential part that is responsible for venting out excess air from the engine's crankcase. If the equipment's engine isn't working as well as it used to, it could be related to a broken or damaged breather. In this situation, the breather will need to be replaced.Replacing the breather will require a socket set, a nut driver, a Phillips head screwdriver, and a set of pliers. Inspecting the breather or making a replacement starts with removing the equipment's muffler. This will give access to the original breather for visual inspection. If it has damage, it should be removed. The new part can be replaced before reassembling the tool.This breather is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The breather is designed to fit onto lawnmowers, snowblowers, tillers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity.