Need Help?
Call or text
Show parts
This is a genuine replacement primer bulb designed for use with select small engines found on outdoor power equipment. The primer bulb is designed to assist with easier starting. Before engaging the engine, the primer bulb should be pushed 3-4 times. That will push fuel into the carburetor to assist with a quicker start. The carburetor has to be filled with fuel and air in order to provide the appropriate mixture to the engine. Without a primer bulb, it could be much more difficult to start engines that have not been run in a while or that might just need some maintenance. This bulb is made of rubber, which can dry out and crack or deteriorate and require a replacement. This genuine OEM primer bulb is manufactured by Craftsman and designed for use on their engines in about two dozen different saws and trimmers. The primer bulb is made of premium rubber material and sold as an individual part. The hardware required to secure this bulb is sold separately. It should only take a few minutes to replace the primer bulb with the right tools. Be sure to disconnect the spark plug and allow the engine to cool before doing repairs like replacing the primer bulb.
Usually ships within 4 - 14 days
The Fuel Line is an OEM replacement part for Husqvarna outdoor power equipment, such as chainsaws, trimmers, and blowers. This component is essential for transporting fuel from the tank to the carburetor, ensuring that the engine receives a steady supply of fuel for optimal performance.
Causes of a bad fuel line can include regular wear and tear, exposure to fuel and environmental elements, or physical damage from mishandling or improper storage. Over time, the fuel line can become brittle, crack, or clog, hindering fuel flow.
Symptoms of a bad Fuel Line include:
This OEM Husqvarna part ensures reliable operation and is compatible with various models of Husqvarna equipment.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
This replacement part is a gasket and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This gasket is specifically found in lawn mowers. Gaskets are an important part of the engine in many machinery. This part helps the engine start and stop as well as run smoothly. A new gasket might be needed if the engine is not starting or stopping as smoothly as before. The gasket might be to blame if there are unusual noises coming from inside the machine. If the current gasket is visibly damaged or missing, it is recommended that it be replaced as to not further damage the engine. Be sure the engine is powered down before attempting to replace a gasket or any parts around it. This gasket is sold individually. This part is sourced directly from the manufacturer and is a genuine OEM part.
This flywheel key is a genuine Husqvarna part, sold individually. This flywheel key can be used as a replacement part in trash compactors, string trimmers, leaf blowers, and chainsaws. The purpose of the flywheel key is to keep up the momentum generated by the engine in order to maintain the rotation of the crankshaft.The flywheel key can be punctured, dented, cracked, warped, or eroded, and if this occurs, the flywheel key should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This flywheel key is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Poulan Pro, Broan, and Paramount.
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a wave washer, also called a wave spring washer, that is used in many types of lawn and garden equipment. The wave washer is a small metal disc with a hole in the middle. Rather than being flat like most washers, the wave washer has waves that offer three, four, or six points of contact to better carry a load and create a large range of deflection.As the equipment containing the wave washer is used, it can experience damage or wear and tear. When this happens, the wave washer will not operate as expected by holding the load and assisting other components in the equipment. The equipment will need to be disassembled to reach the wave washer. Remove any parts in the way and remove the old component before replacing it with a new part.This is an authentic OEM replacement part that has been sourced directly from the manufacturer. The wave washer is sold as an individual part. The washer is made to be compatible with string trimmers, leaf blowers, chainsaws, carpet cleaners, and trash compactors manufactured by Turf King, Paramount, Broan, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman.
This is a genuine carburetor screw that is designed to replace missing or broken screws in certain lawn and garden equipment engines. On select models of small engines, there are two carburetor screws that are used to secure the carburetor to the rest of the engine assembly. These screws are made of durable material, but also constantly exposed to high heat and constant vibrations. They may become worn, damaged, or even snap off entirely as a result. They sometimes also get lost in the process of other repairs and will need to be replaced. This genuine OEM part will offer the solution for compatible engines. This OEM carburetor screw is compatible with hedge trimmers, edger/trimmer models, and blowers that use the appropriate engine. There are over 150 models that take this carburetor screw, including those from Husqvarna, Paramount, Weed Eater, Jonsered, and Poulan. This durable screw is sold as a single unit and features a hex socket head, so be sure to have the proper tool for installation. Those who need to replace both screws will have to purchase two separately. Be sure to allow the engine to cool completely and wear gloves whenever replacing screws or performing other engine repairs.
This genuine Husqvarna air filter can be used as a replacement part for the small engines of string trimmers. An air filter prevents the engine from accumulating dirt, debris, pebbles, and other such external materials in its infrastructure which could cause corrosion or damage to the engine components and wear them down over time.An air filter should be replaced several times within the lifespan of a standard string trimmer as a part of routine maintenance, so these OEM replacement parts should be on hand for frequent replacements. An air filter is not made out of particularly durable material so it can easily be subject to damage in the form of punctures, rips, tears, and holes that can allow dirt and debris to pass through. If this occurs, the air filter should be immediately replaced before significant internal damage occurs to other components. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This air filter is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.
This replacement part is a screw. This is a genuine replacement part made by Husqvarna. This part is typically very small but important to many different types of appliances. They are responsible for holding things in place so that the engine can run smoothly.A new screw might be needed if the current one is missing or damaged. This might include being dented, bent, or cracked. It is not unusual for screws to be stripped down after years of normal use. If this is the case is it recommended that these parts be replaced as soon as possible. The repair should be simple and only require a screwdriver and possible pliers if the previous screw is lodged in place. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.
This is a genuine fuel cap with retainer that is designed as a replacement for select outdoor lawn and garden equipment engines. The fuel cap is responsible for sealing the fuel tank, providing an airtight fit and securing the fluid inside the tank to prevent fuel spills during use. The plastic retainer holds the cap in place when it is open. Both parts could become damaged over time and the retainer could detach entirely. If this occurs, it is best to replace the entire unit.This OEM fuel cap with retainer is manufactured by MTD and designed for use in machines from the brand, as well as those from Yard Man, Husky, Bolens, and Yard Machines. It screws on and requires no tools for installation. The retainer simply fits into the fuel tank to secure the cap when it is open. This cap is sold as an individual part and does not include any additional hardware or a new fuel tank. If the fuel tank itself is damaged and needs replaced, that will require an additional purchase. This fuel cap with retainer will ensure that fuel stays secured and that the unit can run properly at all times.
This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.
This is a reed valve found in many types of lawn and garden equipment. The reed valve is a single-direction valve that is located near the inlet port. This component lets a mixture of fuel and air into the crankcase while preventing it from coming back out of the same part. A reed valve moves from open to closed and back again based on the level of pressure within lawn equipment. Over time, the reed valve can experience issues like chipping, breaking, loosening, or bending. When these things happen, the valve reed will need to be replaced.To access the reed valve, remove the rear cover of the machine. The carburetor must also be removed to get access to the reed assembly. Take the reed valve out of the mounting assembly and install a new replacement part.This is an authentic OEM replacement component that is sourced directly from the manufacturer. It is sold as an individual component. The reed valve is used with string trimmers, pole pruners, and leaf blowers manufactured by Craftsman, Husqvarna, Paramount, Poulan, Poulan Pro, and Weed Eater.
This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This wrist pin retainer is an essential component that is used to secure the piston pin in many types of handheld lawn and garden equipment. The pin is made of durable metal, but if it is missing or has become damaged, the part will need to be replaced. A wrench set, screwdriver, and pliers will be needed to make the replacement. To replace the wrist pin retainer, get access to the piston and then take off any keeper rings included. Use tools to tap on the wrist pin retainer to make it come loose and take it out of the equipment. The replacement can be inserted into the same place and the equipment will need to be reassembled.This is a genuine OEM replacement part that is sourced directly from the manufacturer. The wrist pin retainer is designed to be used in trash compactors, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, pole pruners, and carpet cleaners manufactured by Turf King, Craftsman, Paramount, Husqvarna, Broan, Weed Eater, Poulan, and Poulan Pro. The part is sold individually.
These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This spark plug is a genuine Husqvarna part, sold individually. This spark plug can be used as a replacement part for tillers, string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners.Spark plugs in outdoor appliances such as these might have to be replaced if they are not functioning as usual. If the ignition system is not working, if the spark plugs are not igniting in the first place, or if the spark plugs are igniting but the engine is not powering on, it is likely that the spark plugs are damaged and should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This spark plug is compatible with the following outdoor appliance brands: Husqvarna, Stihl, Craftsman, Weed Eater, Toro, Cub Cadet, Ryobi, Homelite, Poulan, Wheel Horse, Tecumseh, Tanaka, Black Max, and Green Machine.
This is a high-quality muffler attachment spring used in blowers and trimmers. The muffler attachment spring is made of durable metal. It is responsible for ensuring the muffler stays in the correct location. The component also prevents excessive vibration when using the equipment. Sometimes the muffler attachment spring can become damaged, experience corrosion, or break. If this occurs, the component will need to be replaced.If the muffler attachment spring is broken or damaged, it may not properly hold the muffler in place. This can be dangerous and create other issues and needed repairs. Before making the replacement, turn off the lawn or garden tool and place it on a flat surface. The spark plug wire should be disconnected before starting the replacement process. Basic tools and work gloves may be needed to make the replacement.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as an individual part. The muffler attachment spring is used in string trimmers, leaf blowers, and pole pruners manufactured by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.
This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.
This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.
Known as a starter rope, this part is used to start the engine of the tool and wraps around the recoil pulley. The pulley and return spring spin to begin the firing of the spark plug for the engine to run. The rope can malfunction and create problems or even prevent the engine from starting. The most common cause for replacement is when the rope splits or starts to fray and doesn’t operate as usual. A tangled kit rope can also make the rope hard to pull to start up the engine before doing yard work. Users who experience excess rope or a knot on their kit rope when starting the engine may need to look into replacement. This Husqvarna Kit Rope is a component that attaches to chainsaws, hedge trimmers, string trimmers, and leaf blowers. This is a genuine OEM product directly from the manufacturers and is sold individually. It can be used with many models from Husqvarna, RedMax, Craftsman, McCulloch, Poulan, Weed Eater, Paramount, and Homelite. Installation requires only a pair of pliers, a screwdriver, and a Torx screwdriver. Other products that may be needed include a pulley and starter spring.
This retainer is a genuine Husqvarna part, sold individually. This retainer can be used as a replacement part in a string trimmer or a leaf blower. The purpose of the retainer in a string trimmer or a leaf blower is to secure the recoil starter pulley while the appliance is in use. The retainer in a string trimmer or a leaf blower might have to be replaced if it can no longer secure the recoil starter pulley. If damaged, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This retainer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, Weed Eater, Paramount, and Turf King.