Parts for Poulan S31SST (RECON): Crankshaft / Cylinder / Crankcase Parts

Primer bulb pushes fuel into the carburetor for easier engine starting. Replace if cracked, hard, or won't prime. Confirm fit with your model number.

Replacement screw for chainsaw assembly. Used to secure various components. Order a new screw if original is stripped, missing, or damaged during repair.

Fuel pickup filter draws gas from tank to carburetor. Replace if engine won't start or runs poorly due to clogged filter. Verify fit with your model number.

If your chainsaw won't start or runs then stalls, a cracked fuel line may be blocking fuel flow. This replacement line restores proper fuel delivery.

Fuel supply line kit for chainsaws and trimmers. Replaces cracked, brittle, or deteriorated fuel lines. Essential for maintaining fuel system integrity.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

Catches debris entering your trimmer's engine for proper air/fuel mixture. Replace when dirty or clogged to fix poor performance, misfiring, or gas smell.

If your carburetor is loose or vibrating excessively, this mounting screw secures it to the engine assembly. Quick 5-minute fix for most models.

Line trimmer filter holder channels air through valves into the engine cylinder. Replace if cracked, warped, or airflow is restricted. Confirm fit with your model number.

This replacement part is a carburetor assembly. This is a genuine replacement part made by Husqvarna. The carburetor is able to mix fuel with oxygen so that the engine is able to run smoothly during use. A new carburetor might be needed if the current one is not working properly. If the user hears unusual noises coming from inside the machine, it might be best to replace this part. If the engine is unable to start properly, it can be due to a faulty carburetor. Be sure the engine is shut down before attempting to replace this part. It is also recommended that work gloves be used to ensure safety during the repair or replacement. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This replacement part is a carburetor assembly. This is a genuine replacement part made by Husqvarna. The carburetor is able to mix fuel with oxygen so that the engine is able to run smoothly during use. A new carburetor might be needed if the current one is not working properly. If the user hears unusual noises coming from inside the machine, it might be best to replace this part. If the engine is unable to start properly, it can be due to a faulty carburetor. Be sure the engine is shut down before attempting to replace this part. It is also recommended that work gloves be used to ensure safety during the repair or replacement. This part is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

Replacement mounting screw for grass trimmers, hedge trimmers, blowers, and pruners. Secures housings and covers. Replace if stripped, missing, or damaged.

If your trimmer won't start or runs rough, a damaged reed valve may be blocking proper fuel-air flow. This inlet valve ensures one-way crankcase flow.

Replacement mounting screw for chainsaws and outdoor power equipment. Secures components in place. Replace if stripped, missing, or damaged during maintenance.

Mounting screw for chainsaws, trimmers, and pruners. Secures components to the engine housing. Replace if lost, stripped, or damaged from use.

Can't start your leaf blower or trimmer? A broken starter handle prevents the pull cord from engaging the engine. This replacement handle restores easy starting in minutes.

Starter rope kit for gas line trimmers. Installs in the recoil starting mechanism. Replace if rope is frayed, broken, or won't retract properly.

Crankshaft seal prevents oil leaks and maintains engine pressure in grass trimmers. Replace when you notice oil seepage or starting difficulties. Verify fit with your model number before ordering.

Tapping screw for outdoor power equipment engines. Replaces missing, stripped, or damaged mounting screws. Consult your parts diagram for location.

Baffle plate that installs inside the engine housing to regulate heat retention. Replace if cracked, warped, or missing to restore proper protection.

This is a starter pulley used in trimmers and pruners. The starter pulley protects and encloses the starter rope. It includes a metal screw that is used to keep the rope in place while inside of the pulley. If the pulley is damaged, becomes cracked, or is lost, it can cause a malfunction and the rope may jam inside of the tool. When this occurs, the part will need to be replaced.Removed the starter to inspect the pulley for damage. The pulley should be replaced if needed. To replace the starter pulley, pull out the starter rope and use a screwdriver to secure the pulley and recoil spring. Remove the rope and screwdriver before releasing tension on the spring by rotating it. Next, take out the original pulley and replace all the other components.This starter pulley is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The component is used with pole pruners and string trimmers manufactured by Craftsman, Poulan, Poulan Pro, and Weed Eater.

Starter rope won't retract on your trimmer? This starter spring kit restores automatic rope rewind. Fits recoil starter assemblies on trimmers.

Rubber grommet for line trimmers and outdoor power equipment. Replaces cracked, worn, or missing grommets that provide vibration dampening and protection.

Tapping screw for outdoor power equipment. Secures various components in chainsaws, trimmers, blowers, and hedge trimmers. Replace if missing or stripped.

Fix a loose or rattling piston with this wrist pin retainer. Secures the piston pin in trimmers, blowers, and hedge trimmers. Basic hand tools needed.

Complete muffler assembly kit for grass line trimmers, hedge trimmers, and pruners. Replace cracked, rusted, or damaged muffler components to restore quiet operation and proper exhaust flow.

Cylinder shield for gas leaf blowers and line trimmers. Protects internal engine components. Replace if cracked, broken, or missing for proper operation.

If your trimmer's muffler is loose or vibrating excessively, this attachment spring secures it in place. Simple repair for most models.

If your edger won't start or runs rough, a worn spark plug is often the culprit. This part restores ignition for smooth starts. Quick 5-minute fix.

Ignition module for gas leaf blowers and trimmers. Works with flywheel to create spark timing. Replace if damaged by heat exposure or engine won't spark.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.