Parts for Kenmore 795.72482411 (79572482411, 795 72482411): Custom Chill Parts

The Water Filter LT800P is an OEM part for LG refrigerators. This filter is designed to remove contaminants from the water supply, ensuring clean and fresh-tasting water and ice.

Causes of a bad water filter can include extended use beyond its recommended lifespan, exposure to high levels of contaminants, or damage to the filter itself.

Symptoms of a bad Water Filter LT800P include:

• Unpleasant taste or odor in the water or ice
• Reduced water flow from the dispenser
• Indicator light signaling the need for replacement
• Visible sediment or particles in the water

This OEM LG part is also compatible with Sears/Kenmore.

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This Drawer Tray Assembly replaces a damaged or worn crisper/produce drawer to restore storage and organization in your refrigerator. It provides a stable surface for fruits and vegetables and helps keep produce contained and ventilated. What it does:

• Replaces a cracked, warped or broken crisper/produce drawer tray
• Restores smooth sliding and proper seating in the refrigerator drawer cavity
• Helps contain spills and keeps produce organized
• Supports normal airflow/venting designed for the drawer area

• Unplug the refrigerator or disconnect power before servicing
• Remove the old drawer by pulling out and lifting to disengage; align new tray with rails and slide into place
• Check for proper seating and smooth operation after installation

This drawer tray assembly replaces a damaged or worn refrigerator storage drawer to restore stable storage and smooth operation. It supports food storage and helps the drawer open and close as designed. What it does:

• Replaces cracked, warped, or broken drawer tray that no longer supports items
• Restores proper seating and alignment so the drawer slides smoothly
• Prevents items from falling through or catching on damaged edges
• Helps maintain internal organization and usable refrigerator space

• Disconnect power to the appliance before servicing to avoid injury
• Handle the tray carefully to avoid damage to plastic edges or clips
• Remove any contents and existing drawer components before installing
• If the drawer uses mounting clips or rails, inspect and replace damaged hardware as needed for proper fit

This rail guide assembly restores smooth, supported movement for a refrigerator drawer or shelf that binds, falls, or slips. It replaces broken or worn guide hardware so the drawer opens and closes reliably. What it does:

• Guides and supports the drawer along the cabinet track for smooth sliding motion
• Prevents the drawer from sagging, sticking, or detaching during use
• Reduces scraping, grinding, or noisy operation caused by damaged rails
• Aligns the drawer for proper sealing and even weight distribution

• One rail guide assembly as shown

• Disconnect power to the appliance before service and remove stored items from the drawer
• Remove the drawer and any trim to access the rail
• Inspect mounting clips and fasteners; reuse or replace only the items explicitly specified by the manufacturer

This rail guide assembly restores smooth, stable sliding and alignment for a refrigerator drawer. It replaces worn or damaged drawer rails to help drawers open and close evenly and prevent sticking or dropping. What it does:

• Supports and guides the refrigerator drawer along its track for consistent movement
• Keeps the drawer aligned to prevent rubbing, sticking, or uneven closure
• Helps prevent the drawer from disengaging or falling out when pulled
• Reduces noise and binding caused by worn or damaged rails

• Disconnect power to the appliance or unplug before starting any repair
• Remove the drawer per your model's service instructions to access the rails
• Align the new rail assembly and secure with existing fasteners; do not force parts
• If you encounter damaged mounting points or broken fasteners, stop.

This right-side Freezer Basket Support Rail is an OEM part for LG refrigerators. Located inside the freezer compartment, it provides elevated storage shelves for ice cream, frozen vegetables, meats, and more above the freezer floor.

Causes of a bad support rail can include damages such as cracks or breaks that compromise its load-bearing ability over years of use. Sharp freezer temperatures cause constant contraction and expansion.

Symptoms of a bad support rail include:

• Baskets or containers unstable and prone to tipping
• Reduced storage capacity within the freezer
• Safety concerns if a cracked rail were to fully collapse

This OEM LG part can also be used on Kenmore/Sears appliances. 

The Freezer Basket Support Rail is an OEM part for LG refrigerators. This component is essential for supporting and guiding the freezer basket, allowing it to slide in and out smoothly. The rail measures approximately 13 x 2 inches.

Symptoms of a failing Freezer Basket Support Rail include:

• Difficulty sliding the freezer basket in and out
• Unusual noises such as grinding or squeaking when moving the basket
• The basket becoming misaligned or tilting when pulled
• Visible wear or damage to the rail

Causes of a bad support rail often include mechanical stress from overloading the basket, frequent use which can wear down the material, or accidental damage during cleaning or rearranging items within the freezer.

This OEM LG part is also compatible with Sears/Kenmore.

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place