Parts for Briggs & Stratton 33R877-0033-G1: Cylinder Head Parts

The head gasket is a crucial part in any gas-powered engine that sits between the cylinder head and the engine block. It creates a seal for the internal combustion process that creates power from the engine. It ensures that oil and coolant travel throughout the engine, keeping it lubricated and cool. Designed to be long-lasting and durable, they can blow if an engine is too hot or even through simple wear and tear. This replacement head gasket is designed for use in small engines and lawn mowers. It is compatible with Cub Cadet, Simplicity and Briggs & Stratton machine. This is an OEM replacement part that is made of layered steel and elastomer. This gasket ships individually without any hardware.

Here is a metal cylinder head screw replacement that is compatible with a wide range of engines. The screw is typically used as a means to fasten various components together in the engine. This includes securing the cylinder head components. However, it could be used for other applications in some machines. Owners can check their diagrams to see how and where the screws are used. The cylinder head screws are subject to the usual wear and tear, as well as corrosion. When the threads are stripped, they begin to corrode, become bent, or are otherwise damaged, they should be replaced. Replacing the screws tends to be a fast and simple repair. This genuine OEM cylinder head screw is made from high-quality durable metal. It is sold individually, so buyers may want to purchase several at the same time. The screw can be used in a range of machines including lawn mowers, snowblowers, leaf blowers, wood chippers, generators, tillers, pressure washers, and other small engines. Brands with compatible models include Briggs & Stratton, Toro, Cub Cadet, Murray, Lawn-Boy, Simplicity, and MasterCut.

A keeper valve is a small piece of hardware used to help to secure a valve. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, a lawn mower, a snowblower, and a wood chipper. It is compatible with products by brands such as Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn Boy, MTD, and Simplicity.The keeper valve fits into a groove in the end of the valve stem to secure the valve spring, valve spring retaining washer, and valve stem together. It is only natural that, over time, the keeper valve may wear out from regular exposure to the elements, get damaged, fall out, or become lost. In any of these events, a replacement will become necessary.The replacement or repair process of the keeper valve should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location. This keeper valve is an original OEM part sourced directly from the manufacturer, Midwest Engine. It is sold individually.

This genuine OEM replacement intake manifold gasket for a small gas-powered lawn appliance motor acts as a seal between two engine components, like any other gasket. However, the intake manifold gasket is one of the most necessary gaskets because it is responsible for sealing the engine vacuum and coolant. Intake manifold gaskets can be damaged because of their location in the engine. If the engine has been running hot for a while, the metal can expand and crush the gasket, causing it to fail. If this happens, the engine will begin overheating, as coolant can no longer reach the areas where it is needed. Replacing an intake manifold gasket will mean removing the air filter and its housing, the oil drain tube, blower housing, breather tube, and carburetor. Making this repair requires a set of socket wrenches and screwdrivers. This part is compatible with a wide range of mowers, chippers, and blowers from Briggs & Stratton, Toro, Cub Cadet, MTD, Simplicity, and Lawn Boy. It is sourced from the original manufacturer and ships individually.

This is a replacement rocker arm adjuster that is specifically designed for use in select lawn mower engines. The rocker arm adjuster attaches to the rocker arm, which is responsible for opening and closing the valves on the engine responsible for injecting fuel and air. By doing this, it impacts the horsepower and performance of the engine. Over time, rocker arm adjusters can become lost or damaged. If they are not functional or are missing, the rocker arm will not be able to open and close the valves appropriately and the engine may not function at all. This genuine OEM rocker arm adjuster is manufactured to exact standards for Briggs & Stratton engines and is designed to offer an exact replacement for the part that came with the machine originally. This part can also be used as a replacement on select models from Toro and Lawn Boy, with over 150 machines that can use this rocker arm adjuster in total. The part is made of durable materials and sold as an individual unit. No additional hardware or parts are included. Never perform repairs on a hot engine and always wear gloves for hand safety.

This genuine Midwest Engine valve cap protects the internal workings of the small engine by keeping dirt, debris, pebbles, and any other small material picked up by the appliance out of the engine. The valve cap of a small engine outdoor appliance might have to be replaced if it suffers damage or if it is simply lost or misplaced, which could allow dirt and debris swept up into the air by the appliance to enter the infrastructure of the machinery and cause internal damage. Before more severe damage occurs, it is best to remove and replace the damaged valve cap. This replacement should be done before using the outdoor appliance again, as to not run the risk of further damage. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This valve cap is compatible with the following brands: Midwest Engine, Briggs & Stratton, Toro, Simplicity, Lawn-Boy, MTD, Craftsman, and Cub Cadet. It can be used as a replacement part for the small engines of outdoor appliances such as lawn tractors, lawn tractors, snowblowers, wood chippers, leaf blowers, tillers, and edgers. This part is sold individually.

This is an O-ring seal that can be used in many types of engines for lawn and garden equipment. It is responsible for sealing the connection between the cylinder head assembly and the intake manifold. The sealing process prevents dirt and debris from moving throughout the equipment and getting into the motor. As time passes, the O-ring seal can shrink, causing oil or air leaks and decreasing engine performance.When the O-ring is damaged, clogged, worn, or broken, it will need to be cleaned or replaced before using the lawn equipment again. The damaged or broken O-ring seal can be removed using a flat head screwdriver. After it has been removed, the replacement component can be installed in the same place. Make sure that the O-ring seal is properly seated to avoid additional leaks. Reassemble the parts before using the tool. This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold individually. It is used in lawnmowers, lawn tractors, snowblowers, and wood chippers manufactured by Simplicity, MTD, Lawn-Boy, Cub Cadet, Toro, and Briggs & Stratton.

This replacement valve seal is a genuine OEM part for a lawn tractor or mower. The valve stem is a type of valve that transfers oil into the cylinder and then immediately reseals due to the pressure in the chamber. However, if the seal is damaged, it will not close and oil will leak into the cylinder. If this happens, the cylinder head may become overly lubricated and not run well. This seal helps prevent that from happening. It fastens to the intake valve and valve stem keeper. Seals will naturally wear out over time due to stress and exposure to corrosive oxidizing agents in an engine. When this happens, the valve will leak oil. To test if the valve seal is compromised, look for whitish-grey smoke that indicates burning oil and also measure to see how much oil the engine is consuming. If the seal is breached, use a screwdriver and socket wrench set to change out the part. This top of the line replacement valve seal is compatible with Briggs & Stratton, Toro, and Lawn Boy lawn tractors. It is sourced from the original manufacturer and ships individually.

Flange screws have a flange located near the top of the screw, which helps to distribute the connection force over a larger area to reduce potential damage to the machine. It also allows the screws to be used in oversized or irregular holes, and it helps to ensure they stay in place. This flange screw also has a hex top. Screws can last for a long time. However, they may become corroded or worn over time and need to be replaced. They could also become lost and need a replacement. Without all of the screws in the proper places in a machine, it could vibrate too much, which could render it less effective or unsafe to use. The flange screw is a genuine OEM part that can be used with many types of machines including lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, generators, wood chippers, and other small engines. The screws are compatible with Briggs & Stratton, Craftsman, Toro, Cub Cadet, Murray, Lawn-Boy, Snapper, Simplicity, and MTD.

This authentic OEM replacement push rod connects to the camshaft on small or medium sized gas-powered lawn tractor engines, and as the camshaft turns, the push rod transfers that motion into the valves. Without a functioning push rod, the valves will not open and the engine will not work. Push rods also act as transferring units that bring oil through the valves and into the camshaft. If these parts start to stick due to poor lubrication, push rods can bend and will no longer work properly. It is also possible, though rare, for a push rod to bend due to general metal fatigue over time. To identify a bent push rod, listen for a ticking sound in the engine and look out for any slipping gears. Accessing the push rods will mean taking apart the camshaft and valves and may require the user's manual. This replacement part is sourced from its original manufacturer and is compatible with Craftsman and Briggs & Stratton lawn tractors. It ships individually.

This rocker arm is a genuine Midwest Engine part. A rocker arm is a vital part of an internal combustion engine that controls the intake and exhaust valves in order to direct power from the engine to the wheels, setting the appliance, such as a lawn tractor, wood-chipper, snowblower, or lawn mower in motion. Natural wear and tear from extended use over a long period of time can cause an internal combustion engine to malfunction or fall into disrepair. The longer a rocker arm is in use without replacement, the more likely it is to be subject to damage. This will require a replacement rocker arm. Signs of weakening infrastructure for which the rocker arm might be responsible can include unexplained clicking noises, stalling engines, lit-up check engine lights, and clear visual signs of deterioration on or around the rocker arm itself. Always wear gloves when handling, repairing, and operating outdoor equipment.This rocker arm replacement part works with engines, lawn tractors, wood chippers, snowblowers, and lawn mowers from brands Briggs and Stratton, Toro, Cub Cadet, Lawn Boy, Craftsman, MTD, and Simplicity.

This push rod guide is designed for use with various lawn and garden equipment motors. It has a construction of plastic and metal that fits into the cylinder head assembly. The purpose of the push rod guide is to secure the push rods and keep them in the proper position. Sometimes these guides can break, become weak, or be covered in residue and need to be replaced.If there are issues with the push rod guide, remove the spark plug before removing the air cleaner assembly, oil fill tube, fuel tank, and blower housing. Any other parts in the way like muffler guards, rewind starters, and carburetors should also be removed. Take the screws off the valve cover and remove them before pressing the spring retainer and spring over a valve. At this point, remove the push rod guide and replace it.This pushrod guide is a genuine OEM replacement part sourced directly from the manufacturer. It comes as a single part. The guide is compatible with lawnmowers, wood chippers, and snowblowers manufactured by Simplicity, Briggs & Stratton, MTD, Craftsman, Lawn-Boy, Toro, and Cub Cadet. A wrench and socket set are useful for making the replacement.

This is a replacement valve gasket set that can be used with a range of different types of lawn and garden equipment that have valves. The gaskets are an important part of these machines. They will help to distribute pressure more evenly while providing an air-tight seal for the valves. This ensures there are no leaks. Gaskets can start to wear down and become brittle the longer they have been used. Some may crack, or they may not fit properly when trying to reassemble parts of the engine. This can cause air to get into the valves. In those cases, it is important to buy quality gaskets as replacements. When making repairs, the owner should make sure they are using the correct gaskets on the right parts in their engine to ensure they work correctly. The valve gasket set is an authentic OEM replacement part. It comes with several different types and sizes of gaskets for use with lawn mowers, snowblowers, and other small engines. The gaskets are compatible with Briggs & Stratton, Toro, Cub Cadet, and Simplicity.