Parts for Columbia 17ARCBDT897 / 2014: Deck Lift Parts

This replacement part is a lift link plate. This is a genuine replacement part made by MTD. This specific part is responsible for allowing certain parts to lift and stay in place while in use.A new lift link plate might be needed if the user is no longer able to use this part effectively. If the plate is damaged or missing, it is recommended that it be replaced. This can include being dented, bent, or cracked. Work gloves are recommended during this repair to keep the user safe. Refer to the appropriate user manual for more specific information on how to replace this part. This should be a fairly simple repair and shouldn't require more than common household tools. This lift link plate is also sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This replacement part is a deck lift plate and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Deck lift plates are found in different types of lawn mowers and assist the user in adjusting the height of the deck in the lawn mower. This part is important to the overall workings of the appliance. A new deck lift plate might be needed if the user notices that the current deck lift plate is faulty or damaged. If the user is unable to adjust the deck height in the appliance, the deck lift plate might be to blame. Be sure to wear work gloves while replacing this part as many close parts can be dangerous to those working. This part is sold individually. This is also an OEM replacement part sourced directly from the manufacturer to ensure proper fit.

This deck lift plate assembly is designed for installation on riding lawnmowers. This part is a vital component of the deck and blade assembly. The deck lift plate is connected to the deck lift gear assembly and assists in raising and lowering the lawnmower blades to the desired height for cutting. If the deck lift plate becomes damaged or malfunctions, the mower may lose all ability to control the height of the blades. In some cases, the deck may become inoperable. Because this installation is in an area where blades are present, always wear gloves and use extreme caution to prevent injury. The deck will need to be removed in order to properly install this part.This MTD deck lift plate assembly is a genuine OEM product sourced directly from MTD. The listed part is only available individually and is not included with any other components. This deck lift plate is compatible with Cub Cadet brand lawnmowers.

This is a genuine replacement self-tapping hex screw with a blunt nose designed for lawn mowers and lawn tractors. It is used in a variety of locations for the engine assembly of lawn mowers. The self-tapping feature allows the metal screw threads to tightly secure to other metal. The blunt nose requires the use of a pre-drilled pilot hole smaller than the diameter of the screw. These screws do not interchange well. Be sure to check the owner's manual to ensure the correct part number. The hex head needs a socket wrench for the easiest removal and replacement. When removing this type of screw, stripped threads can occur. If this happens, use a screw of the same type in a slightly larger size to accommodate for the damage. Typically, this type of screw would need to be replaced when removed to access another part of the lawn mower for replacement, such as the carburetor. This an OEM part sourced directly from the manufacturer and is sold individually. This screw fits products by Bolens, Brute, Columbia, County Line, Craftsman, Cub Cadet, Huskee, Huskee Supreme, MTD Black, MTD Gold, Mastercut, Murray, Troy Bilt, Yard Man, & Yard Machines.

This replacement part is a bolt and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This bolt has many different uses and is a versatile part in lawn mowers and power tools. Bolts help other parts of the machine or appliance stay together and in place so that the entire machine is able to run smoothly. A new bolt might be needed if the current one is missing or damaged in any way. It is common for bolts to become stripped overtime due to normal wear and tear and need to be replaced. It's common for users to have some on hand so consider purchasing more than one. This repair should be simple and require no more than a screwdriver and possible pliers if the previous part is stuck. This bolt is sold individually and is a genuine OEM replacement part.

This ferrule is a genuine MTD part, sold individually. This ferrule can be used as a replacement part in a lawn mower. The purpose of the ferrule in a lawn mower is to fasten components to one another through a circular ring mechanism that seals onto one or more components.The ferrule in a lawn mower is a small component that can be easily misplaced or lost within the standard lifespan of the appliance. If the ferrule is lost at some point during the operation of the appliance, it should be immediately replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This ferrule is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Yard Machines, and Yard Man.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.

A cotter pin is a small but necessary part found in many pieces of outdoor lawn & garden equipment and machinery. It is a type of split pin, which is a metal fastener featuring two tines that are bent during installation to fasten metal together. It designed for use especially with lawn tractors and is compatible with products by the following brands: MTD, Craftsman, Cub Cadet, Yard Machines, MasterCut, Bolens, Yard-Man, and Troy-Bilt.The low cost, availability, and extreme versatility of these cotter pins mean that they are used in countless machines nearly everywhere. Since this is a standard piece of hardware used frequently with lawn and garden equipment, it is important that the user refers to the appropriate diagrams of his or her unit to ensure the part is installed correctly.This cotter pin is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this particular cotter pin is MTD.

This shoulder spacer is a genuine MTD part. It is manufactured as a replacement part for lawn tractors and zero-turn riding mowers. The shoulder space helps keep the mower deck and aligned properly. If the shoulder spacer is damaged, the mower may be difficult to steer and may ride unevenly. In addition, the grass may cut unevenly.Normal wear and tear should not necessitate the replacement of the shoulder spacer, although an accident can cause it to bend or become damaged. Because it helps with the alignment of the tractor, it is not safe to operate the equipment if the shoulder space is damaged. To replace the shoulder spacer, some disassembly of the tractor or mower may be required. Allow the engine to cool completely, disconnect the spark plug, and empty the fuel tank before attempting to replace this part.This shoulder spacer is a genuine OEM part sourced directly from the manufacturer. It is sold individually. It is designed to work with machines manufactured by Craftsman, Columbia, Murray, MTD, and Troy-Bilt.

This deck lift pivot cup is an authentic OEM replacement part sourced directly from the manufacturer for use on riding lawnmower decks. This pivot cup separates the hex lock nut and the lift arm so that the arm can move freely while being secured to the deck. If the pivot cup is damaged or broken, the lift arm would not be able to move, and the deck would not be adjustable up and down. Regular maintenance and inspection will reveal problems with parts like the pivot cup, which can then be repaired. If the deck is not moving freely, the pivot cup should be checked and replaced if necessary. Park the mower on a flat surface and take the spark plug out for safety. Remove the deck mower and remove the blades. Locate the lift arm and the hex nut. Remove the hex nut and set it aside. Remove the damaged pivot cup and then insert the new one. Replace the hex nut and tighten it. Reverse the process to reassemble the lawnmower. This deck lift pivot cup is a metal part that is sold as a single unit. It is designed for use on lawn mowers and lawn tractors manufactured by MTD, Murray, and Craftsman.